Used Longitudinal Bending Machine for sale (65,754)

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Tjdpfx Amey Rh Rfskea Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Overall dimensions: Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Special 32, Used Machine Manufacturer: Peddinghaus Type: Special 32 Overall dimensions: Width: 660 mm Depth: 850 mm Tedpjy R A Niofx Amkoa Height: 830 mm Weight: 325 kg Electrical data: 400 V; 7 A Bending capacity: max. Ø 32 mm (single bar) Bending speed: approx. 10 rpm Motor power: 2.2 kW Control system: Automatic bending angle adjustment, foot pedal start

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Tedjzaq Dljpfx Amkja Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Tjdpfx Ajwhmv Ujmkja Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Tsdjga T Dpspfx Amkoa Height ----- 1175 mm

Condition: new, functionality: fully functional, Year of construction: 2024, control type: manual, working width: 1,270 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, back gauge adjustment: manual, back gauge: 760 mm, overall weight: 380 kg, total length: 1,600 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Tsdpfx Amoga T A Iokea Height ----- 1175 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 1,020 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, overall weight: 340 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Tsdega T A Depfx Amkea Max. bending angle ----- 0 - 135 degrees Weight ----- 340 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, functionality: fully functional, control type: manual, working width: 1,020 mm, folding beam adjustment: 48 mm, bending angle (max.): 135 °, overall weight: 320 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Finger bending machine with a segmented upper clamp Includes manual back gauge PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 48 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 320 KG Width ----- 1350 mm Tedpfjga T Ddjx Amkja Depth ----- 850 mm Height ----- 1175 mm

Condition: used, Veenstra pipe bending machine. Tsdpfxezq Amlo Amkja Size 25 or 32. In good working condition. Used personally for my own work; no longer needed. Includes various sizes.

Condition: excellent (used), Year of construction: 1998, Technical data: Tjdpfxov Htnij Amkea Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Tedpfsvk Scgjx Amksa Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 62538, total width: 1,200 mm, total length: 1,500 mm, total height: 170 mm, overall weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, type of input current: three-phase, For sale: automatic box/panel bending machine as shown in the picture. The machine is in brand-new condition and is for sale due to lack of use. This is a very fast and functional bending machine, ideal for high-volume production of boxes, panels, and thin sheets. It features servo-electric drive, which ensures rapid bending output. Todpfxjv S Exdo Amkea Applications include: lockers, kitchen equipment, electrical enclosures, and various other thin sheet bending tasks. Machine specifications: - 10 axes - Total width: 1500 mm - Opening (maximum height between lower and upper tool): 170 mm - Bending thicknesses: Steel (DC01): 1.5 mm Stainless steel: 1 mm Aluminium: 2 mm - Minimum bending dimensions for parts: 340 mm x 340 mm - Maximum sheet length: 1600 mm - Weight: 10 tons

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Tedpfxezbcwms Amksa Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Todpjzfvvvjfx Amkoa Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Tjdoza D U Dspfx Amkja

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Tedpfex Ii Hvjx Amksa Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty. Tsdpox Dtt Ajfx Amkea

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Tsdotr U Hljpfx Amkoa Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: B698, overall weight: 6,000 kg, total height: 1,800 mm, total length: 5,000 mm, total width: 2,000 mm, IMCAR SIHR 8/5 Three-Roll Bending Machine Tedpfx Amozkhznjkea - Bending length: approx. 3100 mm - Roller thickness: approx. 250 mm Note: The item must be collected between September 15 and September 17, 2026, on a date to be determined. FCA D-76474 Au am Rhein - loaded onto a truck.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Bending length: 2,000 mm Tsdpfxozi D Sas Amkoa Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Bottom roller diameter: 280 mm Top roller diameter: 300 mm MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Weight: 14,200 kg

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Tjdpfx Aewp Szlomkoa

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. ca. 190 mm roll diam. toproll 140 mm bending speed 3.0 m/min engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Tsdpfx Aezkbn Ismkea Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length Todpfxou Ibuke Amkea - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Tedpfowwt Hfox Amksa Accessories included: Rollers for 1" pipe Straightening rollers Operator's key Operating manual

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Tedpst Akxaefx Amkea Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions