Used Bernardo Master 400 for sale (195)

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Podpsgd Iagjfx Ab Ijrd Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: new, turning length 1000 mm turning diameter 400 mm turning dia. in gap 560 mm spindle bore 52,0 mm turning speeds 45 - 2.000 U/min bed width 210 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 100 mm total power requirement 2,0 / 2,4 kW weight of the machine ca. 810 kg. range L-W-H 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display Podpfx Ajxaau Ssb Ierd - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Operating tool

Condition: new, turning length 850 mm turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm Prsdpfx Aexaaxwjb Ijd spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: new, Bernardo circular saw FKS 2000 Pro/ 400 V Technical specifications Table dimension 800 x 380 mm Format table 2000 x 270 mm Trimming length 2000 mm Max saw blade diameter 315 x 30 mm Max cutting height 90° / 45° 100 / 80 mm Cutting width at the parallel stop 1200 mm Table height 870 mm Table extension 500 x 310 mm Table widening 800 x 880 mm Boom table with roll 700 x 580 mm Speed Main saw blade 4000 rpm Speed scoring saw blade 5800 rpm Scribble saw blade 90 x 20 mm Suction connection of 100 mm Engine power S1 100% 3.8 kW (5.1 hp) Motor recording power S6 40% 5.3 kW (7.2 hp) Voltage 400 V Machine dimensions (W x D x H) Predpfx Asd N Tagsb Isd 2000 x 2900 x 1180 mm Weight approx. 280 kg Delivery • HM saw blade 315 x 3.0 x 30 mm / Z 40 • Pre-cut saw blade 90 x 3.0 x 20 mm / Z 12 • Saw blade protection hood with suction connection • Connection hose with Y-piece • Miter stop with eccentric tensioner • Miter stop • Trimming shoe • Table extension • Table widening • Parallel stop • Extendable telescopic stop • Stop flap with fine adjustment • Boom table • Sliding stick • Sliding handle • Operating tool Properties • Extendable telescopic stop (up to 2260 mm) mountable at the front and rear boom table, infinitely pivotable from 90° to 45° • Important performance feature: saw blade diameter 315 mm can also be used when the scoring unit is mounted • Large-sized work table and standard table widening for cutting

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 Pedpfxjxaa Ths Ab Iord - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, Band saw Bernardo HBS 400 NSchnittbreite: 410 mmSchnitthöhe: 260 mmSägeband dimension: 3345 x 25 x 0,6 - 3 ZpZSägebandbreite: 9,5 - 37 mmSchnittschwindigkeit: 420 / 840 m/minTisch dimension: 450 x 560 mmTable height: 890 mmSaw table inclination: -5 to 45°Suction connection: Ø 2x 100 mmMotor output power: S1 1002 kW (3.0 PS)Motor input power: S6 400 kW (4.0 PS)Voltage: 400 VMachine dimensions: (W x D x H)875 x 740 x 1740 mmWeight approx.132 kg Psdpfx Asd Tcaksb Iord

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Psdpfx Aboxak H So Ierd Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: new, Band saw Bernardo HBS 460 N - 400 V Technical Specification Cutting width 465 mm Cutting height 280 mm Sawband dimension 3607 x 25 x 0.6 - 3 ZpZ Saw widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimension 480 x 630 mm Table height 970 mm Saw table inclination -5° to 45° Psdpod N S Urefx Ab Ierd Suction connection of 2 x 100 mm Engine power S1 100% 2.2 kW (3.0 hp) Motor recording power S6 40% 3.0 kW (4.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Delivery • Saw band • Longitudinal stop with magnifying glass • Miter stop • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor incl. brake • Sliding stick • Operating tool

Condition: new, turning length 1000 mm turning diameter 380 mm turning dia. in gap 490 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray Predpfx Aboxabv Rj Isd - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: new, Bernardo Center and lathe master 180 incl. 3-axis digital display Top width 1000 mm Tip height 180 mm Swing over bed 360 mm Swing over bend * 480 mm Swing over cross slide 220 mm Bed width 185 mm Spindle bore 51 mm Spindle mount DIN 55029, D1-5 Speed range (8) 70-2000 RPM Range of longitudinal feeds (32) 0,052-1,392 mm / Rev Area plan feeds (32) 0.014 - 0.380 mm / Rev Metric threads (26) 0.4-7.0 mm Predpfx Absd Du Tio Ijd Inch thread (34) 4-56 Gg/1 " Quill diameter 42 mm Quill trail 110 mm Spindle mount MT 4 S1 engine power output 100% 1.5 kW (400 V) Motor power S6 40% 2,2 kW (400 V) Machine dimensions (W x D x H) 1920 x 750 x 1600 mm Weight approx. 540 kg Bed length removable: 225 mm Scope of delivery • 3-axis digital display i200 with LCD display • 3 - jaw Chuck DK11-200 mm / D5 • Face plate 200 mm / D5, according to DIN 55029 • Fixed bezel - forward diam. maximum 70 mm Diam bezel with • ongoing - forward. maximum 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Pull-out chip tray • Face plate 320 mm • Four-way steel bracket • protective device while the four-way tool post • Slipping clutch • Mikrometerlängsanschlag • Thread watch • LED machine luminaires • Reducing bushing • Change gears • 2 centres • Foot pedal with brake function after CE • motor with magnetic brake according to CE standard • base

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support Pjdjxaa Aijpfx Ab Ijrd

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Psdpfx Abed I H Izs Iord Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool

Condition: new, turning length 1000 mm turning diameter 360 mm swing diameter over bed slide 220 mm Pjdpfx Aexaaz Eob Ijrd turning dia. in gap 502 mm spindle bore 52,0 mm turning speeds 70 - 2.000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 3 MK quill travel 100 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: new, Bernardo universal lathe Compact 400 V Technical specifications Top width 850 mm Tip height 200 mm Swing over bed 400 mm Swing over cross slide 245 mm Bed width 260 mm Spindle hole 52 mm Spindle mount DIN 55029, D1-5 Speed range, 2 levels 50-450 / 450-2500 RPM Range of longitudinal feeds (20) 0.025 - 2 mm / Rev Area plan feeds (20) 0.012 1 mm / Rev Metric threads (26) 0,2-14 mm Inch thread (42) 1-80 Gg/1 " Prjdpfxed Ertrs Ab Isd Quill diameter 50 mm Tailstock runner way 120 mm Spindle mount MT 3 Power 5,5 kW (7,5 HP) Machine dimensions (W x D x H) 1900 x 1000 x 1610 mm Weight approx. 1185 kg Properties Standard with Delta frequency inverters for high torque in the lower revs and nearly constant speed under load Infinitely variable speed control, the set speed can be read off on a digital display To minimize vibration influences the massive Prism bed is equipped in addition with ribs Versatile applications in general engineering, production, item creation... Modern main spindle bearings with angular contact ball bearings in precision design The machine bed, cast in one piece, is extremely rigid and vibration, which satisfies an essential prerequisite for precise turning Space-saving installation possibility through to the front pull-out chip tray Standard with 52 mm spindle bore for manipulating large wave

Condition: new, turning length 1000 mm turning diameter 360 mm turning dia. in gap 480 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min Pjdpoxaawaefx Ab Ierd bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 540 kg. range L-W-H 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame - Operating tools

Condition: new, Bernardo Center lathe Master 410 Pro centre distance 1000 mm Centre height 205 mm Swing diameter over bed 410 mm Swing diameter over bend* 530 mm Swing over cross slide 260 mm Predpfx Abofft N Ss Ijd Bed width 205 mm Spindle bore 52 mm Spindle mount DIN 55029, D1-5 Speed range (16) 45 - 1800 rpm Range longitudinal feeds (48) 0.043 - 0.653 mm/rev Range of cross feeds (48) 0.014 - 0.206 mm/rev Metric threads (36) 0.4 - 7.0 mm Inch thread (28) 4 - 56 Gg/1". quill diameter 45 mm quill travel 125 mm quill mount MK 3 Engine output 1.5 / 2.4 kW Machine dimensions (W x D x H) 1820 x 920 x 1500 mm Weight approx. 760 kg * Bed length removable: 235 mm Scope of delivery 3-axis digital display i200 with LCD 3-jaw chuck DK11-200 mm / D5 Fixed steady rest - passage diam. max. 70 mm rotating steady rest - passage diam. max. 60 mm Coolant system Initial filling with Shell Tellus 46 Extendable chip tray Clamping disk 280 mm Quadruple tool holder Protective device for quadruple toolholder Slip clutch Micrometer length stop Thread gauge LED machine light Reducing sleeve Change gears 2 centring tips Foot pedal with brake function according to CE Motor with magnetic brake according to CE standard Chip rear panel undercarriage Operating tool

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work Prodpfoxaaqgox Ab Ied - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Prsdpfx Abjpag Tte Iod Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop Prodopag Tdepfx Ab Ied - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder Pjdod Du T Iepfx Ab Ierd • Motor protection switch • Automatic shut-off

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and Technical Data: - Drilling depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid traverse system; manual cranking is eliminated - Smooth and steplessly adjustable drilling unit Pjdpfxjxllwcs Ab Isrd - Height adjustment with fine setting and gas spring for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drilling depth adjustable via scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large-dimension cast iron table with ground surface Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Drilling width: 340 mm Height adjustment: 145 mm Drill head swiveling: -60° to +60° Drill table size: 595 × 315 mm Table extension: 2 × 200 × 220 mm Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Prsdpfevutw Hjx Ab Isd Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: as good as new (ex-display), Year of construction: 2021, bore capacity in steel (diameter) 40 mm arm length 370 - 950 mm workpiece height max. -- mm turning speeds 50 - 316 / 316 - 2000 U/min spindle taper MK 4 tread diameter max. M30 boring head -90° bis +90° schwenkbar quill stroke 200 mm feed (6) 0,08 - 0,50 mm/U distance spindle /table 390 - 780 mm T-slots 18 mm Podpfx Aoxwdvbsb Ierd column diameter 220 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,45 x 1,2 x 2,72 m Very good condition * Electromotive height adjustment of the drill head without adjustment the drilling position, ideal for deep hole drilling * Drill head can be swiveled 180°, boom can be moved back and forth and horizontally pivotable * Thread cutting device and 6 automatic drilling feeds * Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces * Digital speed and drilling depth display * Quickly adjust the drill head to the workpiece and clamp it hydraulic * with electronically stepless speed control * User-friendly operation via membrane keyboard Scope of delivery: Thread cutting device LED machine light Coolant device Height-adjustable protective cover Electromagnetic spindle feed Digital speed display Digital drilling depth display Electromotive drill head adjustment

Condition: new, Technical Data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine suitable for sheet metal shops and repair workshops - Sturdy construction with modern design - Easy adjustment of the upper beam via foot pedal, keeping hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending operations - Excellent price-performance ratio - Fast and simple bending process using the handle - Non-slip rubber coating on the foot pedal for safe operation - Easy lower beam adjustment according to sheet thickness - High upper beam for manufacturing deep-flanged profiles Predpfx Absct Rzbe Ijd

Condition: excellent (used), Year of construction: 2010, Bernardo VMS 360 vertical band saw. Top condition as a training machine - hardly used The vertical band saws in the VMS series are suitable for sawing almost all sawable materials (e.g. steel, plastic, non-ferrous materials, colored materials, etc.). They are mainly used in general production, in tool and fixture construction for the manufacture of punching and cutting tools. Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Cutting speed 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H) 940 x 560 x 1850 mm Weight approx. 250 kg Comes standard with band welding device, annealing device, scissors and grinding stone Comes standard with continuously adjustable cutting speed Machine body made of robust steel construction for smooth running Precision blade guide for optimal cutting results Ideal for sawing complicated contours and shapes Blow-out device with compressor included in delivery Prsdpfjvutxdsx Ab Ied For radius sawing, saw bands from 3 mm width available Solid cast iron table, the large support surface ensures safe working Location: from stock 54634 Bitburg - available at short notice -