Used Mütek Mgz 1330 for sale (246)

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Bedpfx Afexfwdj Ajdh Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear Bdsdjd Nnwlepfx Af Aeh --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: S2T238, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 42 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7,500 W, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, feed length X-axis: 180 mm, feed length Z-axis: 1,000 mm, quill travel distance: 110 mm, quill diameter: 42 mm, quill stroke: 110 mm, swing diameter over cross slide: 210 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, swing diameter over bed slide: 330 mm, bar passage: 42 mm, spindle nose: D1-4, center height: 167 mm, bar diameter (max.): 42 mm, travel distance cross slide: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 🔹 For Sale: 2003 Harrison Alpha 1330S CNC / Manual Lathe – 2-Axis, Fanuc Control 🔹 Make: Harrison Model: Alpha 1330S Year: 2003 Type: CNC / Manual Combination Lathe Control: Fanuc Series 21i-MB Condition: Very Good Location: Ireland 📌 Machine Overview: The Harrison Alpha 1330S is a versatile 2-axis CNC/Manual lathe, offering the perfect balance between traditional manual turning and modern CNC precision. Built in the UK and controlled via a Fanuc 21i-MB, this machine is ideal for small batch production, toolrooms, maintenance departments, and educational use. With a compact footprint and generous turning capacity, it’s a reliable and easy-to-use solution for both skilled machinists and CNC programmers. Whether you're running single parts manually or repeat jobs with CNC automation, the Alpha 1330S delivers flexibility and accuracy. ✅ Key Features: Combination CNC/manual functionality Compact, easy-to-install design Fanuc 21i-MB control – intuitive and reliable Dual spindle speed ranges for versatile applications Suitable for one-offs, training, and batch work Quickchange tool post system for rapid setups Comprehensive manuals included 🔧 Technical Specifications: Axis Configuration: 2-Axis Max Turning Diameter: 330 mm Max Turning Length: 1,000 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 210 mm Height of Centres: 167 mm Spindle Bore: 42 mm Spindle Nose: D1-4 Spindle Taper: MT3 Spindle Speed Ranges: Range 1: 0 – 2,000 rpm Range 2: 0 – 3,500 rpm Main Spindle Motor: 7.5 kW Feedrate (Manual): 0.03 to 0.6 mm/rev Feedrate (CNC): Up to 5,750 mm/min Rapid Traverse: X Axis: 3,000 mm/min Z Axis: 6,000 mm/min Cross Slide Travel: 180 mm Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Bodpowtq T Iefx Af Ajdh Tailstock Taper: MT3 Electrical Requirements: 415V / 3-phase / 50Hz Power Supply Needed: 19 kVA 🧰 Included Accessories: Quickchange Tool Post & Tool Holders Set of Manuals 📈 Applications: General Turning Prototyping Educational Training Repair & Maintenance Work Toolroom Operations Short Batch CNC Machining Harrison Alpha 1330S for Sale CNC Manual Lathe with Fanuc Control Used CNC Lathe Ireland 2-Axis CNC Lathe for Sale Combination CNC and Manual Lathe Harrison Alpha Lathe with Fanuc 21i-MB Precision CNC Lathe for Small Batch Work Used Harrison Alpha 1330S UK / Ireland Educational CNC Lathe with Manual Option Compact CNC Lathe for Toolroom Used CNC Lathe for Sale in Ireland CNC Machinery Dublin / Cork / Galway Buy Harrison Alpha Lathe Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, machine/vehicle number: 008383, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Bjdpfjx Swcgox Af Aodh Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Bedpozvmvhsfx Af Aodh Height: 1330 mm

Condition: like new (used), Year of construction: 2013, Technical specifications: Measuring range, X-axis: 700 mm Measuring range, Y-axis: 650 mm Measuring range, Z-axis: 500 mm Size of granite plate: 1330 x 962 mm Dimensions (width x depth x height): approx. 1400 x 1200 x 2450 mm Weight: approx. 800 kg Condition: Bdsdozrfmwjpfx Af Aeh Condition is nearly new, very little used. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Bdodpfx Aswpm Igsf Aeh Location: Röllbach Availability: short term

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Bjdpfx Afsgfm Ryo Ajdh Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Bdedpjx A Df Tofx Af Ajh Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: used, mileage: 2,13,540 km, power: 220 kW (299.12 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 6,740 kg, maximum load weight: 6,760 kg, overall weight: 13,500 kg, tire size: 275/70R22.5, axle configuration: 4x2, wheelbase: 3,260 mm, brakes: constant throttle, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,320 mm, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, cabin, differential lock, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, ClassicSpace, steel body, 1 air-suspension seat, double bench seat, rear window, electric mirrors, electric window left, electric window right, sun visor, auxiliary heater, ABS (anti-lock braking system), frame cladding, differential lock, long-range headlights, work lights, rotating beacon, leaf spring suspension, trailer hitch (air, light, hydraulic), 9-speed gearbox, lashing eyes, lashing rails, underbody protection, tail lift, roof hatch, green environmental badge. Wheelbase: 3260 mm, Body: Meiller 3-way tipper, steel sideboards that can be folded down and are spring-supported, disc brakes on the front axle, drum brakes on the rear axle! Tipper body floor: 5 mm, middle seat! Loading height approx. 1280 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Bdjdpfx Aszw Ekmef Aoh

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hedelius RS 605 K 20, Bjdpjzm Sfcefx Af Asdh Year of manufacture: 2012, Heidenhain iTNC 530 control unit, Travel range right work area: 420/385/520 mm, Travel range left work area: 1330/650/520 mm, 2-axis NC rotary-swivel table 520 x 420 mm / right, Fixed table 1400 x 600 mm / left, Spindle speed up to 12,000 rpm, Water-cooled milling spindle, Water-cooled A + C axis / rotary table, Tool shank: SK 40, 30-position tool changer, Coolant pressure: 25 bar, Filter system: 500 liters, Partition for pendulum machining, Chip conveyor.

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Bdedpfx Ae E Dquof Ajh Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: reconditioned (used), operating hours: 629 h, functionality: fully functional, fuel type: gasoline, empty load weight: 350 kg, HAKO JONAS 900 V Sweeper Bsdoz Dtdfspfx Af Aedh New air filter Machine usage: only 629 hours New main roller brush (PPL 1.0 + wire) combined with a new side brush (PPL 0.9 + wire) ensures excellent sweeping results New 12V 44Ah starter battery Built-in warning light A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping. The machine features a large debris flap for collecting larger waste. The unit has undergone a comprehensive, meticulous overhaul; operating fluids and parts—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 900 V Engine: Petrol Sweeping width (mm): 700 Sweeping width with side brush (mm): 950 Sweeping speed (km/h): 6 Hopper capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions L x W x H (mm): 1500 x 1000 x 1330 Weight ready for operation (kg): ~350 INCLUDED: NEW air filter NEW main roller brush (PPL 1.0 + wire mix) NEW side brush (PPL 0.9 + wire mix) NEW starter battery (12V 44Ah) NEW roller skirt/seals Built-in warning light Waste hoppers (2x 30L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 900 V sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level car parks, warehouses, production facilities, and outdoor areas. Petrol engine ensures high operational flexibility. Wide working width (950 mm) ensures high area coverage/productivity. Clear and intuitive control panel.

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Bodpfx Aozrqpkef Ajdh Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Track length 1330 mm

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically Bdjdpfjfci D Asx Af Ajh * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 320 kg, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH MTP UNIVERSAL LATHE 330 × 750 – 400 V / 230 V – 1.1 KW A professional universal lathe for precision machining of metal components, suited to workshops, production facilities, tool rooms and maintenance departments. Both the 400 V and 230 V versions are in stock, so the machine can be connected to the power supply already available in your facility. Bdjdpfx Aoyvfzqjf Aeh The lathe handles shafts, tapers and other rotational parts, and cuts both metric and imperial threads. Its rigid construction, wide spindle speed range and comprehensive standard equipment ensure accurate, versatile and comfortable operation. TECHNICAL DATA • Swing over bed: 330 mm • Maximum workpiece length: 750 mm • Swing over cross slide: 220 mm • Chuck: Ø160 mm • Spindle bore: 38 mm • Spindle taper: MT5 • Metric threads: 20 pitches, 0.5–4 mm • Imperial threads: 9–40 TPI • Longitudinal feed: 0.135–1.80 mm/rev • Tailstock quill: 70 mm travel, MT3 • Spindle speeds: 12 (60–1650 rpm) • Motor power: 1.1 kW (both versions) • Power supply: 400 V or 230 V (specify when ordering) • Dimensions (L × W × H): 1330 × 750 × 700 mm • Weight: 320 kg STANDARD EQUIPMENT • 3-jaw chuck Ø160 mm • Cooling system • MT3 dead centre • Lathe stand • Change gears for thread cutting • Work light OPTIONAL EQUIPMENT • 2-axis Digital Readout (DRO) DELIVERY THROUGHOUT EUROPE We arrange transport to any destination in Poland and across Europe. Delivery costs are calculated individually; please send us your postcode and city for a transport quotation. Contact us for pricing and availability. We also invite you to explore the other machines in the Metal Technics Polska range.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WF0AXXTTRAMK06895, mileage: 54,000 km, first registration: 12/2021, fuel type: diesel, maximum load weight: 1,330 kg, fuel: diesel, color: white, emission class: euro6d, Year of construction: 2021, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, onboard computer, power assisted steering, soot filter, FORD TRANSIT 350 L2 Trend 2.0 Eco 130 hp, Cab with Fixed Body EURO 6D PAYLOAD 1330 KG AIR CONDITIONER Bodpfxszdc Ide Af Aedh BLUETOOTH RADIO Conventional spare wheel Electrically adjustable, heated, and power-folding exterior mirrors, short arm Front mud flaps Single owner, company vehicle, VAT shown separately Price €19,500.00 + 22% VAT = €23,790.00 VAT included Custom financing options available, even without a down payment, even with low monthly installments. Trade-ins and vehicle scrapping options available Mileage is CERTIFIED both in the contract and on the invoice. Despite our best efforts to list all the features of the vehicle, there may be some discrepancies in the accessories listed and/or in the photographs. Therefore, we invite you to verify the description with one of our consultants, who will be available to provide any additional information. JollyAutocom, Multi-Brand Car Dealership since 1984 - Passenger cars and commercial vehicles of all brands - DFSK – EMC – FOTON dealership for the provinces of CREMONA and LODI - New, nearly new, company cars, guaranteed used cars - VALUATION and TRADE-IN of your used vehicle

Condition: used, mileage: 32,100 km, power: 220 kW (299.12 HP), first registration: 06/2024, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, total width: 2,520 mm, total height: 2,963 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 1330K Meiller Tipper VIN: 754954 Chassis / Components: Bdedpfey Ngk Uex Af Aeh * Wheelbase: 3,260 mm * Leaf spring suspension * Tires: 275/70 R.22.5 * Condition: Tires ~90%, Body ~90% * 1 x Diesel tank, plastic * 1 x Ad-Blue tank * 1 x Meiller hydraulic tank * Underrun protection, fixed * Ball hitch, vertical load 150 kg * Hydraulic connections for trailer Cab: * Cab: S Classic Space * 3 seats * Automatic climate control * Radio * AUX, USB * Manual roof hatch * Cab rear wall with window * 2 x Rotating beacons Body: * Meiller three-way tipper, year of manufacture 2024 * Dimensions L x W x H: 4.20 m x 2.35 m x 0.60 m * Headboard: 800 mm * Certificate: EN12642 Code XL * 3 x Lashing points per side Engine / Transmission: * 7,698 ccm // 300 hp / 220 kW // EURO 6e * Power-Shift 3 / Automatic * Engine brake / High Performance Engine Brake * Differential lock * Power take-off Weights: * Gross vehicle weight: 13,500 kg * Unladen weight: 6,785 kg * Payload: 6,715 kg Other: * German vehicle * 1 previous owner * New inspection - upon request * 32,100 km * TOP condition New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transit license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sale, and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day licenses / export license plates We will gladly help you obtain export license plates / short-term license plates. Handling of customs formalities We will gladly help you with customs matters.

Condition: used, mileage: 32,100 km, power: 220 kW (299.12 HP), first registration: 06/2024, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, total width: 2,520 mm, total height: 2,963 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 1330K Meiller Tipper VIN: 754954 Chassis / Components: * Wheelbase: 3,260 mm * Leaf spring suspension * Tires: 275/70 R.22.5 * Condition: Tires ~90%, Body ~90% * 1 x Diesel tank, plastic * 1 x Ad-Blue tank * 1 x Meiller hydraulic tank * Underrun protection, fixed * Ball hitch, vertical load 150 kg * Hydraulic connections for trailer Cab: * Cab: S Classic Space * 3 seats * Automatic climate control * Radio * AUX, USB * Manual sunroof * Cab rear wall with window * 2 x Rotating beacons Body: * Meiller three-way tipper, manufactured in 2024 * Dimensions L x W x H: 4.20 m x 2.35 m x 0.60 m * Front wall: 800 mm * Certificate: EN12642 Code XL * 3 x Tie-down points per side Engine / Transmission: * 7,698 ccm // 300 hp / 220 kW // EURO 6e * Power-Shift 3 / Automatic * Engine brake / High Performance Engine Brake * Differential lock * Auxiliary drive Weights: * Gross vehicle weight: 13,500 kg * Unladen weight: 6,785 kg * Payload: 6,715 kg Other: * German vehicle * 1 previous owner * New TÜV inspection - available upon request * 32,100 km * Top condition New main inspections / safety checks or weight adjustments are possible upon request. We will gladly assist you with obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our services for you: Bjdpfx Aey Hakpef Asdh Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day registration / Export license plates We will gladly help you with obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Bdodpfx Aozdiz Nof Ash Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Vemag LPG208 Sausage Linking/Twisting Machine (linker) Manufacturer: Vemag Model: LPG208 Machine number: 2080203 Year of manufacture: 2010 Power supply: 400–460 V, 3 phases, 50–60 Hz Current consumption: 9 A Power: 6 kW Dimensions: 1550 × 800 × 1330 mm No guide belts included Bjdpfx Ajx E Drzef Ajdh The Vemag LPG208 sausage linking machine is a highly efficient unit designed for automatic twisting and portioning of sausages in industrial applications. Thanks to its compact, mobile design and compatibility with Vemag fillers, it provides high operating flexibility at various production stations. The LPG208 model enables fast and precise production of sausage portions with consistent length, ensuring repeatable product quality and high production efficiency. Ideal for medium and large-scale meat processing plants.

Condition: used, Kebab Line Frey KL6 260 The Frey Kebab Line KL6/260, combined with the Frey F-Line F260 vacuum filler, is a powerful and professional solution for industrial kebab production and meat processing. This automatic kebab production line produces up to 28 portions per minute and processes discs with diameters of 100–300 mm, making it ideal for döner, kebab, and shawarma applications. The Frey F260 vacuum filler ensures precise and consistent portioning with a capacity of up to 7,300 kg/hour. Thanks to its powerful vacuum technology, stainless steel construction, and user-friendly touchscreen control, this combination is perfect for companies requiring high quality, efficiency, and reliable production. Features include: - Consistent portioning using vacuum technology - Adjustable shapes and sizes for flexible production - Hygienic, durable, and easy-to-clean design - Ideal for food processing, meat processing, and kebab production facilities - This kebab production line is fully manufactured from stainless steel (SS). Specifications: - Production capacity: 28 portions/min - 6 loading stations providing 2 workstations - Adjustable disc diameter: 100–300 mm - Adjustable disc thickness (height): 10–50 mm Bdedpozfzfpofx Af Aoh - Voltage: 400 V (3 + N, 50 Hz) - Power: 11.4 kW - Weight: 1,374 kg - Year of manufacture: 2014 - Compressed air connection: 6–7 bar (5,600 l/h) - Dimensions of complete line (W × D × H): 3470 × 1330 × 2020 mm

Condition: used, Year of construction: 2011, Hesse & Co MS 2504 - Electric Panel Shear - Electric back gauge, 750 mm - Manual shear gap adjustment - 1 set of replacement blades - Operating manual - Year of manufacture: 2011 Technical data - Cutting capacity: 4 mm Bdjdozi A Rujpfx Af Ash - Cutting length: 2550 mm - Cutting angle: 1° 30' - Strokes per minute: 42 - Table width: 450 mm - Table height: 800 mm - Back gauge (max. length): 750 / 100 mm - Motor power: 7.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): 3050 x 1330 x 2260 mm - Weight: 3300 kg

Condition: as good as new (ex-display), Güntner GCVC RD 080.2 Industrial Gas Cooler / Air Cooler / Condenser, Used Equipment Technical Data: Gas Cooler / Heat Exchanger (Güntner GmbH & Co. KG): Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 080.2/12-51-4252820M Year of Manufacture: 2017 (Test Date: 28/07/2017) Internal Volume: 14.31 litres Maximum Permissible Pressure (PS): 41 bar Test Pressure (PT): 45.1 bar Permissible Medium Temperature Range (TS): -50 °C to +100 °C Factory Serial No.: 504029474/30.00094 Project No.: 101052309 Fan and Drive (Ziehl-Abegg): Manufacturer: Ziehl-Abegg (Germany) Type: VT01445U.1 / MK152-ZIK.17.UA Rated Power: 4.1 kW Bdjdpjz Hzfvefx Af Ash Supply Voltage: 3~ 380–480 VAC, 50/60 Hz (8.8–5.2 A) Rated Speed: 1045 RPM (Current Consumption: 3.6 A) Control and Equipment: Factory-installed Güntner digital display control unit / electrical control box Industrial-grade protection and robust frame construction Overall Dimensions: Width: 3020 mm Depth: 810 mm Height: 1330 mm Installation Dimensions: Width: 2860 mm Depth: 650 mm Height: 1160 mm

Condition: ready for operation (used), Year of construction: 2009, pressing force: 25 t, total height: 2,500 mm, controller manufacturer: CYBELEC, controller model: DNC 60, product length (max.): 2,300 mm, number of axes: 3, This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine. • Distance between columns: 1250 mm • Number of CNC axes: 3 • Working speed: 8 mm/s • Main voltage: 400 V • Frequency: 50 Hz • Phase: 3-phase • Tool clamping type: PROMECAN Amada • Condition: Good, working condition • Status: Currently disconnected; possible to check under power Bdodpfxjzia Dfe Af Aoh Technical Specification Bending Length 1330 mm