Used Mixing Plant For Laser Sintering Material for sale (24,107)

Condition: used, functionality: fully functional, Used asphalt mixing plant Ammann MEA 180 Mixing tower complete, Ammann mixer 4 t Drying drum Benninghoven, year of manufacture 2018 Blodpfx Apsywn Idovok Burner Benninghoven, year of manufacture 2018 Filter unit Benninghoven, year of manufacture 2018, exhaustor 2018, chimney 10 dosing units with conveyor belt Control system in container Loading silo with skip hoist and winch Filler silos with screw conveyors and transfer elevator RC addition with drying drum and complete conveying technology without bitumen section

Condition: used, Eos EOSINT plastic laser sintering system P380, fully operational with extensive accessories. Bljdpsyghhusfx Apvsk

Condition: used, Description: EOS plastic laser sintering system EOSINT P 730 with upgrades Complete with extensive accessories Blodpfx Aoyghgdspvsk

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system Bsdozmyviopfx Apvslk The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: like new (used), Atlas Copco / Scheugenpflug Blodpfxjy Naf Ee Apvjk The entire system is unused and in new condition. Type: VDS P6030 Automatic processing of a complete process from loading to unloading. Mixing of two components (e.g., resin and hardener) directly in the process. Precise application of the material at defined positions on the workpiece. Movement of parts via a 3-axis system (X, Y, Z). Operation in automatic, semi-automatic, and manual mode. Technical data: Power connection: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fuse rating: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (without condensation) Enclosure protection class: IP21 Foundation inclination: max. 0.05 % Clearance around the machine: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Type: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Stirrer in each tank Vacuum sensor per tank Level sensors including overfill protection Intake valve per tank Sight glass with lighting Vacuum degassing directly in the tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous delivery in a dual pump system Pump variants horizontal and vertical for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect the vacuum pump Control via SCP touch panel Operating modes: automatic, pause, external control Material circulation in pause mode Connection to external control via interface possible Monitoring of production time, system availability, and material consumption Calculation of the remaining material availability Supply: 230 V or 400 V AC Operation outside the EU with a transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Type: LP804 Technical data: Application: Conveying and processing of 1-component and 2-component dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liters Control voltage: 24 V DC Power connection: according to wiring diagram Rated current: according to wiring diagram Power consumption: according to wiring diagram Fuse rating: according to wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (non-condensing) Enclosure protection class: IP54 Protection class entire system: IP20 Installation surface: max. 0.5 % inclination Clearance around the system: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Scheugenpflug SNDE121196 ZES 217955 Dimensions: L 212 cm / W 209 cm / H 215 cm / Scheugenpflug SNDE121197 ZES 217958 Dimensions: L 190 cm / W 190 cm / H 220 cm / 430 kg (machine) + 100 kg Scheugenpflug SNDE118236 ZES 216335 Dimensions: L 200 cm / W 100 cm / H 220 cm / Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Further questions can be clarif

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blsdpfx Apjzixziovok Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: good (used), EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & operating terminal Exchange frame with build platform Multibox is a typical accessory for powder handling in EOS systems, enabling transport and interim storage of materials. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, power consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1,230 × 1,175 × 2,100 mm Control cabinet: 610 × 790 × 2,100 mm Operating terminal: 950 × 700 × 1,550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data: Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: air-cooled Pump: high-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: water or water-glycol Connection: NPT version ("AN") Power supply: 200–230 V AC, single-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) Blodpfx Apezimhqsvek If you have further questions, we would be pleased to answer them by phone.

Condition: used, Year of construction: 1999, operating hours: 13,300 h, * Bitelli SF 200 asphalt milling machine Blsdpfx Ajzm Epbepvok * Year of manufacture: 1999 * Operating hours: 13,000 h * MB engine * Milling width: 2 m * Hydraulic folding conveyor belt * Weight: 29,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! Bljdpfxsu U Ad Rs Apvjk EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba Bljdpey T Ukdofx Apvok * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, functionality: unexamined, Year of construction: 2009, Dryer drum - tube -without base frame and drive unit. Bodpezlbxvefx Apvelk

Year of construction: 2019, condition: ready for operation (used), A complete and fully automated tank storage and mixing system for the production of non-alcoholic, non-explosive liquids is available. Stainless steel tanks: 2, tank volume: 5m³, total volume: 10m³. Equipment: load cells, dosing pump, agitators, control system and level sensors. The system has seen very little operation and is therefore in an almost like-new condition. Documentation available. An on-site inspection is possible. Blodezl U H Hjpfx Apvek

Condition: used, mileage: 3,76,615 km, power: 265 kW (360.30 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 20,500 kg, maximum load weight: 11,500 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 09/2008, emission class: euro4, brakes: constant throttle, suspension: steel, driver cabin: day cab, Equipment: ABS, additional headlights, cabin, central locking, cruise control, traction control, Vehicle location: Bovenden, with housing, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, Telligent gear shifting, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, work lights, rotating beacon, storage compartment, leaf spring suspension, 2-axle with front-wheel steering, U-shaped protection, side aluminum fender, roof hatch, remote control, green environmental badge. Blodjzl Tgrepfx Apvok Body: Schwing-Stetter FBP 20-100, drum AM7FHC+L, remote control (remote control). Operating hours (read) total approx. 21,508, auxiliary drive: approx. 10,483 operating hours, concrete pump: approx. 3,321 operating hours, boom approx. 4,260 operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, machine/vehicle number: W-028664, We offer a high-quality Eirich intensive mixer R08 for sale. Technical data: • Manufacturer: Eirich • Model: Intensive mixer R08 • Machine number: W-028664 • Year of manufacture: 2006 • Usable volume: max. 75 liters / 120 kg (maximum values) • Batch operation • Maximum mixing material temperature: 40 °C Special design The machine features a hydraulically pivoting mixing top section, which allows the mixing tools and the mixing container to be cleaned particularly easily and quickly. This design significantly simplifies maintenance and cleaning work. Control system Bodpfx Aozmhztepvslk Including machine control system STA015847A for the Eirich intensive mixer R08: • Siemens Simatic OP7 • Supply voltage: 400 V ±5 %, 3/PE, 50 Hz ±2 % • Switchgear voltage: 24 V DC • Valve voltage: 24 V DC • Direct switching of all motors Electrical equipment • Main switch with integrated emergency stop according to VDE 0113 / IEC 204 • 3-pole power disconnect switch • Lockable with a padlock Condition The machine underwent a complete mechanical and electrical overhaul at the Eirich factory in 2017. Since this factory overhaul, the mixer has been used exclusively for occasional experimental and testing purposes and is therefore in very good technical condition. Scope of delivery • Eirich intensive mixer R08 • Machine control system STA015847A • Ex works • Loading onto a truck is possible • Packaging by agreement Inspection The mixer can be inspected in Bachenbülach by prior appointment. We will be happy to provide you with further information or arrange an inspection appointment.

Condition: used, Year of construction: 2019, operating hours: 9,000 h, * Vögele Super 1900-3i asphalt paver * Year of manufacture: 2019 * 9000 operating hours * 142 kW * 22150 kg * Screed: 26AB / AB600-3 TP2 compaction screed * Hydraulic paving width: 6 m * Automatic grade and slope control * Central lubrication Bodpfx Aezlilwjpvolk * Extensions: 2 x 75 cm & 2 x 25 cm * Total working width: 8 m

Condition: new, Year of construction: 2015, Storage location number: 100636087 Transport dimensions (L x W x H): 0 x 0 x 0 Bljdpozkz Rpefx Apvjk

Condition: new, Year of construction: 2024, operating hours: 129 h, Storage location number: 100637990 Transport dimensions (L x W x H): 0 x 0 x 0 ---- good condition Bledpfxozkzyqs Apvjk

Condition: used, Year of construction: 1995, operating hours: 2,612 h, Since 1972, your reliable partner for all matters concerning automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles, and construction machinery! We continuously offer you attractive financing options at special reduced rates. If you are interested, we are happy to prepare an individual offer for you! Trade-ins of your commercial vehicle or construction machinery are welcome. Bedpfxsy Aqmms Apvslk If you require a new TÜV inspection, we will gladly provide you with an offer from one of our partner workshops. Our offers generally do NOT include a new TÜV inspection unless otherwise specified. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The information provided in advertisements, online, on price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or guarantee for typographical or data transmission errors. Listed features should be verified separately as needed. Subject to errors and prior sale.

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P385 The following items are included with the EOS P385 system: Build chamber Powder container Cooler: Termo TEK Thermochiller 1100 The following upgrade has already been carried out: Software: CDs Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on August 10, 2007 Laser replacement on May 15, 2008 X-axis drive motor replacement with a used motor on May 4, 2020 Pyrometer replacement on June 30, 2020 Bledpfozdyx Eox Apvjk 350mm x 350mm x 610mm Voltage 3/N/PE/400V, Frequency 50 Hz Connected load 8 kW, Fuse rating 32 A MAX. laser power 100 W, Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Bljdozdyxlepfx Apvek Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Blsdpfx Apozdywzjvok Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking ram Removal carriage 3DM 8-zone process chamber heater 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2018, operating hours: 4,163 h, condition: used, functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 31,500 kg, hopper volume: 7,000 l, machine/vehicle number: PID000123KDGI16212, Belt feeder for stockpiles 2-deck heavy-duty screening machine Bjdpfx Aozbri Ejpvjlk Engine: Cat-C4.4 Dual power system Hopper extension Telescoping side conveyors Transport dimensions: 15,380 x 2,860 x 3,390 mm (L x W x H)

Condition: new, Year of construction: 2025, Plant Type : Mobile Concrete Batching Plant with SINGLE SHAFT MIXER Plant Capacity: 60m³/ hour freshly compressed concrete Mixer Capacity: 1500/1000 lt (1m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. *EASY TRANSPORTATION Bodpfswn Exhex Apvjlk *MINUMUM INVESTEMENT FOR FIELD GROUNDWORK *QUICK INSTALLATION

Condition: new, Year of construction: 2025, MOBILE CONCRETE BATCHING PLANT M100-TWN GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Bljdown Exuepfx Apvsk Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: new, Year of construction: 2026, BITUMEN EMULSION SPRAYER ABS-8000 Bitumen Emulsion Sprayer ABS 8000 – is the optimal equipment for performing large volumes of work in the shortest possible time. Autonomous diesel engine makes it possible to install the equipment on any truck. Theelements of control are located on a separate panel in the driver’s cab with partial redundancy in the control cabinet, which facilitates the adjustment of equipment and the transition of its working bodies from the transport to the working position. High quality bitumen pump and shut-off valves ensure trouble-free operation of the equipment. SPECIFICATIONS Density of surface coating – from 100 g / m2 to 1600 g / m2 Spraying width – from 2 m to 3.7 m Cleaning system. Tank capacity 8000 l. Function of tank self-pumping. Spraying barblowing by compressor. Rear view camera with monitor in driver’s cab. Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver’s cab. The system for heating the bitumen emulsion with a diesel burner (Italy). Spraying rod control equipment (lowering and expanding) by means of a remote control in the driver’s cab and on the vehicle body. REQUEST A CALL Buy BITUMEN EMULSION SPRAYERS TM TICAB – the best decision for you! Our price is competitive today and tomorrow. Specifications: Density of surface coating – from 100 g/m2 to 1600 g/m2; Spraying width – from 2 m to 3.7 m; Cleaning system; Tank capacity 8000 l; Blsdpfx Apovpt Dcjvsk Function of tank self-pumping; Spraying bar blowing by compressor; Rear view camera with monitor in driver's cab; Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver's cab; The system for heating the bitumen emulsion with a diesel burner (Italy); Spraying rod control equipment (lowering and expanding) using a remote control inside the driver's cab and on the sprayer body.