Used Wagner Egv 1600 for sale (88)

Condition: excellent (used), Year of construction: 2016, CNC machining center WAGNER WBE 1600 R Year: 2016 Control: Siemens 840 D Technical data: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Table dimensions: 1900 x 700 mm Spindle speed: 8000 rpm SK 40 Videos of the machine available Dedpjy Na Ugjfx Ap Dewc

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Every inquiry or offer is tailored to the customer and their requirements. Djdozaziropfx Ap Dowc

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: Dwjdpfsz Ixlvjx Ap Djc CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,435 mm, spindle motor power: 15,000 W, total height: 2,100 mm, overall weight: 5,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 8287D, number of axes: 2, This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Machine Benefits Qualitative Machine Benefits • Machine in very good condition, with very low working hours Technical Machine Benefits • Right and left spindle rotation • Rapid feed (z, x axes): 15000 mm/min • Repeatability accuracy: ±0. 005 mm • Positioning accuracy: ±0. 01 mm • Max. Distance between centers: 1500 mm • Bed width: 500 mm • Spindle nose camlock: din 55029 kk8 • Linear guides on x and z axes • Precision ball screws, hardened and ground • Telescopic cover on z-axis Extra Information Dwodpszbcmnjfx Ap Dsc Tail Stock Tailstock adjustment: manual Tailstock quill travel: 100 mm Mount Position (Assembly) Electronic handwheels with incremental preselection Feed lever with latch function Rapid feed override with selector switch Movable operator panel Constant cutting speed Media Automatic central lubrication Work lamp Complete coolant system Enclosure with 2 sliding doors and safety glass windows 1 set of foundation bolts CE compliance Control Unit Siemens 828 B-T control ShopTurn operation with Manual Machine mode Dimensions Machine Depth 3400 mm

Year of construction: 2013, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0445-30/100x4 AA-2, Four-stage cascade system for separating ferrous materials Working width: 1000 mm 4 magnetic drums 4 vibrating troughs Base frame As new, immediately ready for use Test run/trial with material possible by arrangement. Dodpfx Apez Ap Rbs Dowc

Condition: ready for operation (used), Year of construction: 2012, spindle bore: 75 mm, spindle speed (max.): 2,400 rpm, rotational speed (max.): 2,400 rpm, quill diameter: 75 mm, Fanuc OITD Capacity: 1750 x 560 mm Dwodpfjzzdtuox Ap Dec Diameter: 390 mm on carriage 12-position turret Tool guards Set of VDI tool holders

Condition: like new (used), functionality: fully functional, overall weight: 6,200 kg, belt width: 1,200 mm, We are offering this Wagner Magnete 451-115/180-600 G6 magnet as new. Dwsdpfx Apjz H Tr Ij Dsc The conveyor belt is also new. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component Dwedpfxjzk A H Eo Ap Djc 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Condition: ready for operation (used), * Brand: Wagner * Length frame: A-A = 2600 mm Dodpfxjywm T So Ap Dswc * Beltwidth: 1200 mm * Driving: 3 kW gearbox * Dim. Block: 1600 x 1100 x 600mm * Incl.: rectifier.

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. Dwodpfxez H H A To Ap Dsc List of thread inserts: M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year: 2023 Djdjy Nzc Espfx Ap Dewc • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Sauter 12-position BMT turret counter-spindle bar feeder complete specifications in PDF file

Condition: repair required (used), functionality: limited functionality, Manufacturer: Maschinen Wagner Model: DCE 230 × 1500 Machine type: Lead and feed spindle lathe Machine no.: 2JG0160 Year of manufacture: 1990 Power connection: 380 V / 50 Hz Distance between centers: approx. 1,500 mm Djdpjz Hpahofx Ap Djwc Swing over bed: approx. 230 mm* Swing over cross slide: approx. 460 mm* Turning diameter over cross slide: approx. 290 mm* Spindle bore: approx. 60 mm* Max. spindle speed: approx. 1,800 rpm* Main motor: approx. 5.5 kW* Machine weight: approx. 1,800–2,200 kg* Feed: mechanical longitudinal and transverse feed (feed shaft does not rotate, presumably a shear pin has sheared) Thread cutting: functions via lead screw and feed gear Guideways in very good condition. Accessories: Tool holder, tailstock center The machine can be inspected on site.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Dsdpfx Aszb I Spsp Dewc Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 630 mm, total height: 2,420 mm, total width: 1,862 mm, total length: 3,390 mm, overall weight: 2,450 kg, WAGNER MILLING MACHINE Dwjdpfx Apsz Ei S Io Doc MODEL: BUT 1270 2VS 3-AXIS CNC X-AXIS: 1000 mm Y-AXIS: 450 mm Z-AXIS: 630 mm DRILLING DIAMETER: 40 USED MACHINE INTERNAL CODE: SVR 442

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,240 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Additional equipment • Rigid cast-iron frame construction • Linear guides on all three axes • Automatic double-arm tool changer (16 stations) • Complete coolant system • Central automatic lubrication • Air blast system for spindle cleaning • Machine enclosure with doors • Machine and signal lights • Documentation in English • CE-certified Machine Benefits Qualitative Machine Benefits • Machine is in excellent condition. Technical Machine Benefits • Spindle motor power (siemens s6 40%): 11 kw spindle motor power (siemens s1 100%): 5. 5 kw • Tool magazine capacity: 16 tools • Tool holder: din 69871 a sk 40 Dwsdjzvu Rmspfx Ap Dsc • Maximum tool diameter: 89 mm • Maximum tool weight: 7 kg • Tool change time: 2 seconds • Chip-to-chip time: 7 seconds • Table clamping surface: 800 x 400 mm • Table load capacity: 300 kg Extra Information Machine still under power Dimensions Machine Depth 2100 mm Technical Specification Taper Size SK 40

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Dwjdpfx Aoziqtdep Dsc

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Dwsdeyrhb Sjpfx Ap Dec Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Dedpfx Apsyw N Acs Dewc Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: ready for operation (used), Year of construction: 2008, Universal tool milling machine WAGNER FCA 400 -Year of manufacture: 2008 -CE marking -3-axis digital readout -Traverse paths X/Y/Z: 450x400x400 mm -Fixed angle table: 740x320 mm -Automatic feeds on all three axes -Rapid traverses -Spindle speed range: 40-2000 rpm -Tool holder: ISO 40 -Vertical / horizontal milling device -Vertical head with quill -Safety handwheels -Coolant system -Horizontal counter-support -Work light -Machine feet Dimensions LxWxH: 1.4x1.2x1.9 meters / Weight: 1800 kg Dwjdey Ddhmspfx Ap Djc Errors and omissions excepted.

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Dwodpfx Apoy Eqtis Doc

Condition: used, machine/vehicle number: 0112240552743, Year of construction: 1980, weight max. in kg:1250 kg stroke:4180 mm fork length:1100 mm total power requirement:ca. 5,7 kW weight of the machine ca.:1,12 t dimensions of the machine ca.:2,0 x 0,85 x 1,85 (BxTxH) m Dwodpfx Apjc Nztvo Dec

Condition: good (used), Year of construction: 1989, functionality: fully functional, Wagner DCG 160 precision guide and lead screw lathe – year of manufacture 1989 Technical data Manufacturer: Wagner Maschinen Model: DCG 160 Djdpfx Ajzhitysp Dewc Year of manufacture: 1989 Swing over bed: 160 mm Maximum turning diameter over bed: approx. 320 mm Distance between centers: approx. 750–1,000 mm Speed range up to approx. 2,000 rpm Guide and lead screw Longitudinal and cross feed Threading unit 380 V Equipment 3-jaw chuck Quick-change tool holder Tailstock Work light Coolant system Description Robust German precision lathe for toolmaking, maintenance, training, and the production of individual parts. The machine is in good used condition and is fully equipped. Ideal for workshops, training centers, or general mechanical engineering.

Condition: used, Magnetic Separator, Overbelt Magnetic Separator, Ferrous Metal Sorting Conveyor, WAGNER MAGNETE 0428-25/60, used machine Dsdpfxozv S Nas Ap Dowc Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 508395 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 600 mm Overall dimensions: 2480 × 1630 × 1100 mm Design / Material: Robust industrial steel frame, with internal high-performance magnetic block and discharge conveyor belt Conveyable / Separable material: Extraction and separation of magnetic ferrous metals (steel, iron, fasteners, structural parts) from bulk material flows (waste, e-waste, shredder residue, glass, construction rubble, wood chips) or any type of material from which magnetic particles/materials need to be separated

Condition: used, Magnetic Separator, Eddy Current Non-Ferrous Separator, Metal Sorting Conveyor, Magnetic Separator, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 284956 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 650 mm Dwodpjzv S A Tsfx Ap Doc Overall dimensions: 2480 × 1850 × 1040 mm Design / Material: Robust industrial steel frame, with high-speed internal magnetic rotor and conveyor belt Conveyable / Separable material: Recovery and separation of metallic and non-ferrous metals (aluminum, copper, brass, bronze) from bulk material flows (waste, e-waste, shredder residue, glass) or any type of material from which magnetic particles/materials need to be separated

Condition: excellent (used), CV saw grinder Wagner model LT Dwsdpeywaxnefx Ap Dec