Used Moretto Dosing System Moretto Dgm 120 S (2015) for sale (88,597)

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Nedpfxezabnzs Aiqeld Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: used, K-Tron volumetric dosing system dosing machine Various models in stock. Twin-screw, single-screw Equipped with a pneumatic shut-off valve Equipped with a vent filter 10 units in stock Nodpjzcfbqsfx Aiqjld See our other listings VMA Wekerom

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) Nlsdey Txfxopfx Aiqod - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: excellent (used), Year of construction: 2003, Piovan material dosing unit colouring station Type Model: MDT 14 -- 1MD 1840 Specification: PA 58D /54S M Year of construction: 2003 volumetric dosing capacity: 0,1 to 3,2 kg./h hopper volume: 15 ltr. 2 separate dyeing stations + 1 main hopper tested for functionality before dismantling Nlsdpehupq Esfx Aiqod available immediately in our warehouse Hannover /Germany

Condition: good (used), Year of construction: 2018, operating hours: 385 h, load capacity: 1,200 kg, lifting height: 1,350 mm, fuel type: electric, mast type: simplex, construction height: 1,850 mm, Manufacturer + model: TOYOTA SWE 120 S * EX * Miretti 3D / Zone 22 * Mast: 1F1350 ID: 26031.0053 Category: Demo Mast: 1F1350 Lowered height: 1830 mm Lift height: 1350 mm Capacity: 1200 kg Year: 2018 Operating hours: 385 hours Battery capacity: 24V / 300Ah Options: * EX * MIRETTI - E8904 System / Certificate = ATEX 00032 Gas group = IIIB Temperature class = 135°C ( = T4 ) Type = Cat 3D (approved for ZONE 22) Wide track * EX * version – with CANTILEVER adjustable forklift forks - SUITABLE for all types of pallets - Width between support legs = 1220 mm !! Nljdszaf Ekjpfx Aiqjd

Condition: good (used), Year of construction: 2015, Moretto XD2 TS Mini Dryer – Technical Parameters (copy-friendly) Drying temperature (max): 180 °C / 356 °F Air flow: 3–10 Nm³/h (1.7–5.9 cfm) Hopper capacity: 15 dm³ (0.53 cft) Nlsdpfx Aeyfhyujiqjd Material capacity (bulk density 0.65 kg/dm³): 9.7 kg (21.4 lb) Total power: 1 kW (1.3 HP) Average energy consumption at 80 °C: 0.062–0.206 kWh Average energy consumption at 176 °F: 0.083–0.276 HP/h Power supply: 230 V / 1 phase / 50 Hz Dimensions & weight A: 409 mm B: 334 mm H: 591 mm H1: 556 mm d: Ø 9 mm D: Ø 50 mm F1: 180 mm d1 (mounting): 4 × M6 I: 100 mm F: 120 mm Weight: 13 kg

Condition: used, Year of construction: 1989, plate thickness 4 mm Nledpfx Aisyv N Hlsqjd cutting angle adjustment 30-120 ° table height 900 mm 407 weight of the machine ca. 760 kg dimensions of the machine ca. 1300x1000x1150 mm

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Njdoh Hp Dtopfx Aiqeld Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Year 2011. Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Nledpfx Ajx Rvc Ajiqod

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. Nodpfx Asua Acqeiqjld A needle cleaning and measuring station is included. The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Inlet and outlet buffers are no longer included—they are shown for understanding only. / years, not used in the last 2 years due to change of product line.

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Nlodoxcvzaepfx Aiqed Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surfaces Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design Njdexcgihjpfx Aiqsld

Condition: excellent (used), Year of construction: 2005, Dosing unit Moretto Year of manufacture: 2005 30 kg Njdpfx Aoxvn Irjiqold

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface Nlsdpfx Asxabpdjiqod * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Nsdpeycin Uefx Aiqeld

Year of construction: 2025, condition: new, Dosing system serial doser for the production of mineral mixtures, FSS, STS, KG 1/2 etc. semimobile unit, dosage, dosificación 4 chambers each about 22 m³, hourly output eff. 720 tons, , Nledpfx Aiegpk E Deqjd 900 recipes can be set, direct loading onto Trucks

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Nledpfsyt I Uhex Aiqod Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: good (used), Year of construction: 2014, lifting height: 10,000 mm, fuel type: electric, color: red, Drivetrain Drive: Wheel Weights Empty weight: 2.580 kg Functional Lifting capacity: 320 kg Working height: 1.200 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Nlsdpfxoxpc Aqs Aiqjd Visual appearance: good Other information Remanufactured: Yes Delivery terms: EXW Transport dimensions (LxWxH): 2,48x1,18x2,47 Latest inspection: 2025-10-13 Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, We are selling several items of SCA (Atlas Copco) equipment from a production cell that was never installed at the end customer. The operating hours are estimated. As this is a dismantled part of the system, there is no guarantee that the system will run independently and completeness cannot be guaranteed. Nodpfxjurlzzo Aiqsld - 3 x dosing head - 3 x control cabinet - 2 x control unit - 3 x drum pump - Various heatable hoses

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Njdpfx Aeyt N A Hoiqeld

Condition: ready for operation (used), A Datron dosing and dispensing system for adhesive and sealing materials is available. Design: gantry design, Y-axis drive: double-sided, travel X/Y/Z: 520mm/650mm/240mm, gantry clearance: 200mm, dosing and positioning speed: 16m/min, repeatability: +/-0.02mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/1950mm, weight: approx. 600kg. Documentation available. On-site inspection is possible. Nlodpfxeyh Nwks Aiqjd

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. Nlsdevvu Snepfx Aiqsd This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Year of construction: 1996, condition: excellent (used), Vötsch VSKZ 04/120/S Walk-In Climatic Test Chamber Manufacturer: Vötsch Type: VSKZ 04/120/S Temp. Range: -40°C to +120°C Line Voltage: 400V Rated Current: 95A Rated Power: 56 kW Refrigerant: R 404 A Year of Manufacture: 1996 External Dimensions: W 2850 x D 4100 x H 3080 mm SO-01 Financing through our bank is also possible. komplett-konzept.leasingo.de Nodsuuigyspfx Aiqeld Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, AZO vacuum system with dosing screw Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Nlodpfx Aioygh Emjqod Year of manufacture: 2004 Equipped with quick cleaning system on dosing screw Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings VMA Wekerom

Condition: used, functionality: fully functional, Brand: Graco - Reference: HFRS63 Stainless steel HFR dosing system with 2:1 ratio and application valve for sealants and adhesives - UPC Code: 00755652143321 - General industry • Insulated glass • Medical sector • Solar technology • Transportation • Flexible packaging • Composites • General assembly applications Applications: • Batch control • Filling • Encapsulation • Vacuum infusion • Automated assembly applications • Pultrusion - Applicable products: Urethanes, Polysulfides, Epoxy materials, Acrylics, Silicones, Glues - Max flow rate: 1.2L/min - Max working pressure: 172 bar - Max air inlet pressure: 6.9 bar - Mixing ratio: 2:1 - Max fluid temperature: 50°C Nlsdpowudxtefx Aiqod - Fully refurbished second-hand item - 6-month parts warranty (terms upon request) - Shipping or in-store pickup available