Used Nabertherm N1000/H Mit Ncc for sale (58,493)

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Hfjdpfx Asyktrtjl Aji TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Hsdpfxjykub Ae Al Ajfi Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: Hsdpfx Aleyxakyo Aofi A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with Hfsdpfxomfn Rue Al Aei a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW Hfsdpfx Alex D U Eye Asi - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg

Year of construction: 2015, condition: ready for operation (used), A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible. Hfjdexrf Iuepfx Al Aji

Condition: used, first registration: 08/2016, Year of construction: 2016, H&W galvanized carriages for bridges up to 7.82 m long with forklift mount and lifting axle 3 available!! For all bridge lengths (7,150 / 7,450 / 7,820 mm)!! Forklift mount!! • Fully galvanized / anodized carriages • Very low • 2 x air-sprung 9-ton SAF axles • Lifting / lowering system • Tires 435/50 R 19.5 • Disc brakes • Lifting axle (1st axle)! - German carriages! - 1st hand Hfjdswmn Uijpfx Al Aji - TÜV / SP: NEW! Subject to errors and prior sale.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2838 664, type of input current: AC, overall weight: 4,710 kg, input voltage: 16,800 V, total height: 1,820 mm, total width: 1,270 mm, total length: 1,920 mm, nominal power (apparent): 2,000 kVA, secondary voltage: 420 V, protection type (IP code): IP54, temperature: 40 °C, space requirement width: 1,270 mm, space requirement length: 1,920 mm, space requirement height: 1,820 mm, Equipment: type plate available, Three-phase oil transformer according to IEC 60076, hermetically sealed design suitable for ambient temperatures from -25°C to 40°C and maximum installation altitude of 1,000 m above sea level, for outdoor installation, with aluminium windings, routine test according to IEC60076, in accordance with Regulation (EU) No. 548/2014 of 21.05.14 Stage 2, valid from 01.07.2021. Hjdpfsynhwrox Al Aofi

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Hfsdpfx Aswxwa Ejl Asi Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, power: 44 kW (59.82 HP), fuel type: diesel, drive type: Diesel, Wheel loader Condition: Ready for use and fully functional Technical condition: normal Description: Wheel loader FIAT - ALLIS - Model 215 - 4x4 wheel loader - Year of manufacture unknown - 3-cylinder FIAT diesel engine, approx. 60 hp - 3 forward gears - 1 reverse gear - Brakes are poor, but functional - Additional hydraulics up to the fork carrier - Engine and transmission are in good condition - Hydraulics are in good condition - INCLUDES bucket and Euro frame for forks. Hjdozknuuspfx Al Aofi Bulk material bucket, 3rd valve, heater, fully enclosed cab, 2-speed hydrostatic drive

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Hfsdswwl Nljpfx Al Aei Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: new, overall weight: 20,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 8,200 mm, loaded height approx. 900 mm, 20 lashing rings each 10 t, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable ramps, spring assist for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or ratchet straps, contour marking according to regulations, spring-actuated parking brake, vehicle hot-dip galvanized, incl. axle load indicators. Surcharges for: Warning panels + lighting + beacon = Price: €800, Widening to 3 m = Price: €1,100, hydraulic one-piece ramps €500, hydraulic ramp displacement? = Price: €1,000, digger shovel recess = Price: €1,000, Also available with 9.20 m loading platform length from stock. -- Subject to typographical errors, mistakes and changes, sample images -- Hfedpozl A Tzefx Al Aji More details available on request!

Condition: used, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, empty load weight: 5,500 kg, Year of construction: 2008, operating hours: 3,000 h, drive type: Diesel, load capacity: 1,800 kg, Wheel loader Condition: Ready for use and fully functional Technical condition: good Front tire condition: 80 - 100% Hfjdpfxezkc Naj Al Aoi Rear tire condition: 80 - 100% Description: JCB 2CX Airmaster – Year of manufacture 2008 – 3000 operating hours – 3-cylinder JCB diesel engine, 50 kW – 4-wheel drive – Cabin – Heater – Lighting system – Additional hydraulics up to the fork carrier, 3rd valve – with folding bucket – Front tires 80% – Rear tires 80% – good condition – Air compressor at the rear 3rd valve, heater, full cabin.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 2,442 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, construction height: 1,900 mm, power: 52 kW (70.70 HP), empty load weight: 4,800 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,850 mm, Telescopic forklift, rigid frame Condition: Ready for operation and fully functional Hedpezkc I Nefx Al Ajfi Technical condition: good Front tire type: Solid rubber Front tire condition: 20 - 40% Rear tire type: Solid rubber Rear tire condition: 20 - 40% Description: DIECI Apollo 190 telescopic loader -- 6m reach -- 2.5 ton lifting capacity -- year of manufacture 2006 -- 2442 operating hours -- mechanical quick coupler -- 4-cylinder Yanmar diesel engine, 52kW -- 4-wheel steering -- 4-wheel drive -- 3 steering modes -- 1-speed hydrostatic transmission -- cabin -- heater -- lighting system -- auxiliary hydraulics to fork carriage, 3rd valve -- including used pallet fork -- front tires 30% -- rear tires 30% -- joystick control -- used bucket (width: 1.90m) available at an extra cost -- price 1000,-- EUR -- overall height: 1.92m -- width: 1.85m -- length 4m -- weight: approx. 5 tons -- good condition -- new starter installed 3rd valve, heater, full cabin Cabin -- heater -- lighting system

Condition: new, empty load weight: 7,460 kg, maximum load weight: 22,540 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting, rotating beacon = price: ¤ 800, widening to 3 m = price: ¤ 100 hydraul. Surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1,100 ¤, hydraulic 1-piece ramps 500 ¤, also with 8.10 m loading area length + widening in stock, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hjdozlnz Repfx Al Ajfi

Condition: used, empty load weight: 4,880 kg, maximum load weight: 5,620 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,450 mm, loading space width: 2,490 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL1500 S tail lift, load capacity 1,500 kg, with own batteries, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hfsdpszliqaefx Al Asi

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations Hfedpfx Aozluq Sol Aoi - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Hfsdpenkal Defx Al Aei

Condition: new, empty load weight: 3,120 kg, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wooden planks 50 mm, loading area bevelled at the rear, inside loading area width 2480 mm, rear stanchion removable, front for through-loading, , Also available with 5300 mm loading area length!!, , Rental price from 500 ¤, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Hfsdpfxjzlc U Eo Al Aoi

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, Also with 8.10 m loading area length + widening in stock , , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Hfjdpfx Alezlc Tns Aei

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,097 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,900 mm, power: 55 kW (74.78 HP), empty load weight: 4,500 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Air Hjdszirmfopfx Al Aofi Front tire condition: 40 - 60% Rear tire type: Air Rear tire condition: 40 - 60% Description: Manitou MT 625 telescopic handler (ST3B series) - - 2.5-ton lifting capacity - - - 6m reach - - - Year of manufacture 2015 - - - 7097 operating hours according to the meter - - - 2-speed hydrostatic drive - - - mechanical quick coupler - - - 4-cylinder KUBOTA diesel engine, turbo, 75 hp - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 4500 kg operating weight - - - Overall height 1.9m - - Width 1.80m - - Length 4m - - - - Tire condition approximately 50% - - - Including used pallet fork - - - Very maneuverable handler - - Telescopic forklift in good condition - - - NEW bucket available for an extra charge!! - - - Inspection and test drive possible - - Including CE declaration of conformity + operating manual - - - Delivery possible. Quick coupler, 3rd valve, 4th valve, work lights front, heater, full cabin, CE certificate.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package Hjdjzlhmmjpfx Al Aefi EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: used, functionality: fully functional, 20 ft OFFICE CONTAINER for sale, starting from Meppen ✅ CONTAINER TYPE: Sanitation container Hodpfxszltcaj Al Aofi ✅ DELIVERY CONDITION: Used, watertight 1 toilet 1 hand wash basin 1 kitchenette Laminate flooring can be installed. The container is sold in used condition and may have defects, dirt, color variations, rust, etc. ✅ DIMENSIONS L x W x H: 6058 x 2438 x 2800, internal height 2500 mm. ✅ TRANSPORT: Please provide your postal code so that we can prepare a free and non-binding offer for the container, including delivery and, if necessary, unloading from the truck. ✅ VARIETY: In addition, you will find a wide range of sea containers in all common sizes (20DV, 40DV, 20HC, 40HC...) and for every need. Whether for storage, construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Features & Equipment Hedpfsxw S Ixjx Al Aefi • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 890 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced transmission support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, at the rear, surcharge for front panel grid 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 folding supports at the rear, price: 1,900 euros, -- printing errors, mistakes and changes reserved, sample images --, more data under: !, More Details: ! Hedpjzk Ivfofx Al Aofi