Used Nko Anfassystem Uz18 Hardworker for sale (249)

Condition: new, functionality: fully functional, machine/vehicle number: 12412802, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm External dimensions approx. 2150 mm x 4450 mm x 2370 mm Gross vehicle weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - Aluminium box body - Polyester roof and front (aerodynamic) - Pullman V2 low-floor chassis - Floor plate: aluminium floor (anti-slip) Bdodpfsq T R R Tox Aprsc - Door/ramp combination (aluminium) - Shock absorbers installed including 100 km/h certification - Lockable side door - Interior lighting with switch - 6 lashing rings on loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks and holders Chassis - Pullman V2 | coil spring suspension and shock absorber | V-drawbar with ball coupling | automatic heavy-duty jockey wheel Electrics - 12 volt | 13-pin connector | marker lights | fog light If you wish to purchase this trailer or have further questions about trailers, please refer to our internal flatbed trailer number "12412802".

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Bdedpfxjy Ia Azs Aproc Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Year of construction: 2019, condition: used, Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands) We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands. This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use. With 1/2 Gastro tooling; 325 x 265 (2x) ----- Key Features - High-capacity automatic traysealer for MAP and vacuum packaging - Equipped with integrated Busch vacuum pump (160 m³/h) - Dual mould system – seal two trays simultaneously for high throughput - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.) - Quick and easy mould change system - Transparent cover for excellent accessibility and cleaning Bjdpoy Nagijfx Aprsdc - Flexible operation with programmable tray formats - Designed for continuous industrial production ----- Technical Specifications - Machine dimensions: 4750 x 1180 x 1550 mm - Vacuum pump: 160 m³/h Busch - Cycle time: 10–15 seconds - Power supply: 400V / 3-phase / 50 Hz - Power consumption: ±10 kW - Air requirement: 6 bar (max. 400 l/min) - Weight: ±1100 kg - Max tray size: 2 × 350 x 260 mm - Max tray depth: up to 120 mm ----- Why This Machine? The TPS 2000 is built for efficient, high-volume packaging with maximum flexibility. Thanks to its dual mould system, it can double production capacity or run different tray formats simultaneously. ----- Availability - Location: Emmeloord, The Netherlands - Status: In stock – immediately available - Condition: Very neat, directly from production ----- Interested? For pricing, additional photos, or a video of the machine in operation, feel free to contact us.

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Bdodpfoxhdtzsx Aprjc 6-month warranty

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length: 670 mm Max. grinding width: 280 mm Max. grinding height: 400 mm Table speed, longitudinal: 2 – 35 m/min Table speed, cross: 0.3 – 40 mm/stroke Rapid traverse: yes Grinding wheel dimensions: 300 / 76 x 40 mm Drive power: 4 kW Machine dimensions L x W x H: 2000 x 1850 x 2000 mm Machine weight: 2300 kg Hydraulic & electrical system dimensions L x W x H: 1200 x 800 x 2000 mm Hydraulic & electrical system weight: 650 kg Accessories / Special features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit Bdedpfsf Um Rasx Aprjc • Grinding wheel • Machine levelling elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in hydraulic unit o Handwheel adjustment for crossfeed newly mounted Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1993, x-travel 0500 mm y-travel 400 mm z-travel 420 mm table-size 800 x 400 mm feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg Bdodoyy A Dxepfx Aproc dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working area.

Condition: good (used), Year of construction: 1984, functionality: fully functional, Table size 2000 x 650 mm Table longitudinal travel 2000 mm Stone transverse travel 650 mm Max. working height 550 mm Stone scraper integrated in the head Machine weight approx. 15,500 kg Dimensions (L x W x H) = 6000 x 2400 x 2900 mm Accessories - Magnetic table - Built-in dresser unit Bdodpfxjyr Iqmj Aprec - Wheel with flange - Hydraulic unit - Separate control cabinet Good condition. The machine will be sold due to company liquidation.

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors. Bdsdpfx Apox Dip Hsrsc

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. Bdsdpfex Unpvex Aprsc With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: ready for operation (used), Table diameter: 2250mm Max. swing diameter: 2500mm Bdodpfeyxb I Tjx Aprsc Max. workpiece height: 1600mm

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included. Bdjdpsy D Rk Isfx Aprec

Condition: used, • Type – 490P/LFB/1Q+14 No. 2020/6450 • Semi-automatic for split strips • Cutting head can be automatically switched between longitudinal and cross-cutting • Digital display for longitudinal and cross-cutting • Cross-cutting drive: Automatic • Longitudinal cutting by pulling the cutting bridge over the cutting table • Complete table is pneumatically tiltable • Air cushions • Breaking bars • Working height approx. 900 mm Bdedpfjwcz Riex Aprec • Table length – 3800 mm, width – 2500 mm • Width with cutting bridge 2800 mm • Year of manufacture approx. 2020 • Price upon request

Year of construction: 1986, condition: used, machine/vehicle number: 860918, cooling capacity: 11165 W/9600 kcal Bdedpobac Tmsfx Aprsc max. outside temperature: 32°C max. working pressure: 24 bar electrical connection: 380 V, 4,12 kW place requirement: 860 x 760 x 1360 mm

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. Bdodpfjv Saxrsx Aproc We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR).

Condition: good (used), Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm Bsded Nrpgopfx Aprjdc -Drawing: with the photos -Dimensions: 1000/270/H900 mm -Weight: 216 kg

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, Heavy Duty Elevating Crossrail Ram Type CNC Vertical Boring and Turning Machine with Hardened & Ground Box Guideways CAPACITY Maximum Turning Diameter - Ø 1,600mm Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) - AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Height - 5,290 mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Bdjdsuu Rybopfx Aprjc Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, Heavy Duty Elevating Crossrail Ram Type CNC Vertical Boring and Turning Machine with Hardened & Ground Box Guideways CAPACITY Maximum Turning Diameter - Ø 1,600mm Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) - AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Bsdeguq Txopfx Aprjdc Height - 5,290 mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC

Condition: reconditioned (used), Year of construction: 2004, HANKOOK MODEL PROTEC 9NC x 4000, UNIVERSAL CNC LATHE WITH 254 MM DIAMETER SPINDLE BORE, REAR 4-JAW INDEPENDENT CHUCK, V8 AUTO INDEXING TOOLPOST & FANUC 21iT CONTROL SYSTEM SWING OVER BED 950 MM SWING OVER CARRIAGE 630 MM MAX.TURNING DIA. 950 MM DISTANCE BETWEEN CENTRES 4000 MM LOAD CAPACITY BETWEEN CENTRES 5000 KG MAX.TURNING LENGTH 4000 MM SPINDLE BORE 254 MM Bdodpfx Apsu Sh Eworec SPINDLE SPEEDS 2 to 1000 RPM NUMBER OF SPINDLE SPEED RANGES 2 – AUTOMATIC SELECTION TRAVERSE RATES MAX PER MIN X: 4M/MIN Z: 6M/MIN NUMBER OF TURRET STATIONS 8 SPINDLE DRIVE MOTOR 37/30 KW TAILSTOCK QUILL TRAVEL 250 MM ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT REAR 254 MM DIAMETER 4 JAW INDEPENDENT CHUCK, DUPLOMATIC V8 ELECTRIC AUTO TOOLPOST, COOLANT AND LIGHTING, FULL LENGTH REAR CHIP GUARD & SLIDING FRONT DOOR, 250 to 450 MM DIAMETER 3 POINT ROLLER STEADY REST, PREPARATION FOR FITTING OF BORING ATTACHMENT, STANDARD ACCESSORIES. CE MARKED MACHINE, LENGTH 6470 MM WIDTH 2205 MM HEIGHT 1890 MM WEIGHT 11360 KGS

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Magnet table 600 x 200 mm Grinding capacity 630 x 200 mm Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Bedpsw R Dnxefx Aprjdc Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Bdedpfx Apjq Hr N Iersc

Condition: like new (used), functionality: fully functional, grinding length: 650 mm, grinding width: 300 mm, grinding wheel diameter: 160 mm, overall weight: 2,550 kg, power: 4 kW (5.44 HP), Brand: CCP - STANKOIMPORT Model: 3E711B Dimensions to grind: 650x300mm (X, Y) - 320mm (Z) Magnet table surface: 630x200mm Permissible table weight: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum stroke of the grinding head: 365mm Manual table travel: (700mm, 250mm) Table travel speed: 2 - 30 m/mm. Cross traverse speed: 0,01 - 1,5m/mm. Vertical feed rate graduation value: 0,002mm Vertical micro. graduation value: 0,0005mm Transversal feed graduation value: 0,5mm Micro. vertical feed graduation value: 0,001mm Transverse displacement one revolution of the nonius: 5mm Bsdpfx Apeqy H Dpersdc Vertical displacement one turn of the vernier: 0.20mm Automatic table traverse feed longitudinal course: 0,2 - 30mm Automatic feed rate for grinding head: 0,002 - 0,08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kw Weight: 2550 kg.

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Bdsdpod Dk A Aofx Aprec Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 diameter range: 1,8-2,5 mm nail length: 32-57 mm output - pieces/min: 2000 Location: Europe Bdjdpfx Ajwi Tl Esprjc

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Machinetype: thread rolling machine for nails Make: ENKOTEC Bdjdpowm Rtzsfx Aprsc Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12E/8139, Offer Number: D12E/8139 Machinetype: wire nail press Make: ENKOTEC Type: NB01 Constr. year: 1994 diameter range: 2.8-4.2 mm Bdsdpfxewi Tmie Aprjc nail length: 60-103 mm output - pieces/min: 950 Location: Europe