Used Mubea Kl 30 for sale (95)

Condition: used, Punching force: 300 kN Nlodpfxsxcndyj Alhsc For example, punch a 20 mm hole in 12 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Nsdpev N Hrtofx Alhjlc Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, machine/vehicle number: 05073 81 767 830, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender KL 1300 Nsdpoy Tim Hofx Alhjlc Price: 3000 Euros

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Nledpfsxaaipjx Alhsc Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm Nledpfxepuy H Dj Alhec - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Njdpfsyvvkwox Alhjlc Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Pressing force: 560 kN For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Nljdpfxjxz Ep De Alhec Assortment of tools is included in the price

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press Njdpsik Sl Hjfx Alhelc -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg Njdpfxjwrn U Hj Alhjlc

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg Nedpfx Aed Ih Stelhelc dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Nlsdpfx Alot Exprohjc Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW machine weight ab. 1700 kg Njdeyv Nvaspfx Alhjlc dimensions 1500 x 650 x 1700 mm

Condition: used, Max. Stanzkraft: 500 kN Reach out: 610 mm Inclusive assortment of punches and dies Njdpfxju T Nv Do Alhjlc Weight: 1700 kg Very good condition

Condition: used, Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch Nedpfxocwn Hfj Alhelc -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Nljdsw U T Uvopfx Alhjc

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons Nledpfxsx Dclbs Alhec -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors Nodpfefkmr Ssx Alhslc (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm Nodpewxy Dgefx Alhslc - with support table

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: Njdpfx Alozhamdoholc - Dimensional stop with digital display 6000 mm - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm Nlodpfx Alog Sx R Rshec round bar steel 13 mm weight of the machine ca. 50 kg dimensions of the machine ca. 800 x 500 x 1800 mm

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Dimensions: 200x75x197 cm LxWxH Nlodpfx Aloncc Huohec

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m Nlsdpfx Aleu Id Ruohjc - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm Nlodpfxeu Ickyo Alhsc square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: Nodpfxjxu Dxqs Alhjlc bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Max. punching force: 700 kN Projection: 510 mm Nljdpoq Iyvvjfx Alhoc Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Quick-change device Assortment of tools is included in the price Weight: 3.000 kg