Used Rilesa Vlg 1524 for sale (114)

Condition: ready for operation (used), Heidenhain UV140 Power Supply Unit ID: 335 009-03 SN: 11524271D – complete with test protocol, professionally overhauled and tested, comes with a 3-month warranty, 100% functional, scope of delivery as depicted in the photos. Iedpsy Nrpvofx Apmjid Note: In the exchange process, your defective return part must not have any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT will apply. Attention: You are bidding on a Heidenhain UV140 Inverter, ID 335 009-03 SN: 11524271D, offered as an exchange service. The unit has been professionally and comprehensively overhauled and tested, comes with a 3-month warranty, is 100% functional, and the delivery scope corresponds to the photos. In both the repair and exchange process, your defective core must not show any mechanical damage such as breakage, as this type of damage is beyond repair. If such damage is found, an additional invoice of €500 incl. VAT will be issued.

Condition: used, mileage: 1,83,881 km, power: 175 kW (237.93 HP), first registration: 08/2022, fuel type: diesel, maximum load weight: 8,160 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 5,360 mm, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 49 m³, loading space length: 7,270 mm, loading space width: 2,490 mm, loading space height: 2,690 mm, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, differential lock, tail-lift, traction control, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies. Engine: OM936, inline-6, 7.7 l, 175 kW (238 hp), 1000 Nm, differential lock on rear axle, remote control for air suspension, wheelbase 5360 mm, plastic tank 180 l, AdBlue tank 25 l, S cab, S cab, locking system with central locking, air conditioning, driver's air-suspended seat, comfort features, electronic braking system with ABS and ASR, power windows, on both sides, rain sensor, daytime running lights, fog lights, lane keeping assist, Active Brake Assist, airbag, driver, cruise control, curtain-sided body, left and right, Edscha sliding tarpaulin, Dhollandia tail lift 1,500 kg. Iedozf Sftepfx Apmjid

Condition: used, mileage: 2,01,650 km, power: 114 kW (155.00 HP), first registration: 05/1995, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 3,670 kg, empty load weight: 10,330 kg, tire size: 285/70 R 19,5, wheelbase: 4,350 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, total length: 2,350 mm, total width: 3,150 mm, Equipment: ABS, cabin, differential lock, Vehicle location: Bovenden, license plate house, 1x air seat, rear window, electric mirror, heated mirror, switch 8, ABS (anti-lock braking system), differential lock, rotating beacon, leaf suspension Wheelbase: 4350 mm Body: Bucher-Schörling SRF -3,5 cbm bvb rail sweeper operating hours approx. 8978 , lowerable trolley with 8 rail wheels track 1435mm and friction drive via rear axle ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ijdsvhgz Ejpfx Apmeid - .

Condition: used, mileage: 93,000 km, power: 176 kW (239.29 HP), first registration: 06/2007, fuel type: diesel, overall weight: 15,000 kg, color: white, gearing type: automatic, emission class: euro4, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, trailer coupling, Topsleeper, roof hatch, green environmental sticker (Euro 4), reversing camera, TV, new general inspection (HU/AU), diesel automatic, Euro 4 green environmental sticker, reversing camera, 2-seater, tow bar, air conditioning, air suspension, pass-through, topsleeper, seating area, TV, overhead storage cabinets, sink, refrigerator, 3-4 sleeping berths, separate bathroom, shower, stalls for 5 horses, rear and side ramps, ramp limiters, windows in horse compartment, roof hatches, storage space, saddle and bridle holders, permissible gross weight 15,000 kg. FOR US, CONDITION AND THE OVERALL FEEL ARE MOST IMPORTANT; PRICE IS SECONDARY. For further questions, Mr. Faller will be happy to assist you at the following number. Iodpeviczkofx Apmoid *TRADE-IN, PART-EXCHANGE, OR YOUR VEHICLE AS COLLATERAL, AS WELL AS FINANCING ARE POSSIBLE! All details given without guarantee.* You can find more offers on our homepage: The description and stated specifications do not constitute guaranteed characteristics and are non-binding. The only binding agreement is the sales contract concluded at the dealership upon purchase of the vehicle. Errors and interim sale excepted!

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Iiodpjrwxz Rofx Apmod Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used Iijdsxbcudjpfx Apmsd * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: like new (used), Year of construction: 2015, operating pressure: 210 bar, input voltage: 400 V, only used shortly because of stopped project Iedpfx Ajfx Icwopmsid

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, laser power: 4,400 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, with ByLaser 4400 with turning axis ByVision cnc control with changing table Technische Daten / technical details: Blech-Nennmass X, Y / sheet nominal size X, Y 3000, 1500 mm Schneidbereich X, Y / cutting range X, Y 3048, 1524 mm Hub Schneidkopf Z / stroke cutting head Z 170 mm Ijdpey N Rgmefx Apmoid Drehachse: / turning axis: Profilaufnahme Spannfutter / profile taper clamping chuck 15-315 mm Profilzuführung durch das Spannfutter / profile feed through the clamping chuck 15-155 mm max. Profilbearbeitungslänge / max. profile working length 2700 mm Laserleistung / laser capacity 4,4 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Gewicht ca. / weight ca. 13500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), mileage: 82,075 km, power: 110 kW (149.56 HP), first registration: 11/2022, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,010 mm, total width: 1,900 mm, total height: 2,050 mm, loading space length: 2,570 mm, loading space width: 1,690 mm, loading space height: 1,410 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Seat cover - Partition = Notes = Configuration: 4x2, Payload: 917 kg, Tare weight: 1883 kg, Gross vehicle weight: 2800 kg, Unbraked trailer load: 750 kg, Braked trailer load, center axle: 2500 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Rear window wiper, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Flashing lights, Engine power: 110 kW (148 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Side panels, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Tailgate, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, ac automatic EURO6 carplay cruisecontrol org NL, Spare wheel, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: VLG-39-G Ijdezk Uqpepfx Apmsid Axle configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Weights Unladen weight: 1,883 kg Payload: 917 kg GVW: 2,800 kg Functional Loading platform height: 57 cm Maintenance APK (Technical Inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €369 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, Year of construction: 2012, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness steel (max.): 14 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness copper (max.): 5 mm, workpiece weight (max.): 750 kg, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, For sale: Salvagnini 3kW Fiber Laser. Year of manufacture: 2012. Iisdpfx Apsvulggsmod The L3 is the first 2D laser cutting system designed and developed entirely to leverage all the advantages of fiber laser sources and linear drives, with features that make it the ideal solution for our customers’ requirements, such as: - Ease of operation - High productivity - Lower operating costs - Reduced energy consumption Key features of the L3 laser cutting system include: - Simple architecture with a purpose-built gantry structure, combining rigidity, precise positioning, high dynamics, and easy accessibility to the work area; - Highly efficient IPG fiber laser source; - Efficient control console for extremely easy and versatile production management, even directly from the machine PC; - High modularity of loading, unloading, sorting, and storage devices, offering a broad range of solutions for specific needs: from basic automation to fully automatic, unattended operation. Automatic pallet changer system for the laser table. Each table is equipped with steel, replaceable grids. Maximum sheet size: 3048 mm x 1524 mm Z-axis travel: 100 mm Maximum sheet weight: 750 kg Working table height: 980 mm Material Cutting capacity Mild steel (S185JR, S235JR, RAEX 250 C LASER): 14 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301): 10 mm Aluminum (Al 99.5 EN AW 1050A): 8 mm Copper (Cu-ETP CW004A H040 EN1652): 5 mm Brass (Cu Zn CW508L H055 EN1652): 5 mm L3-30 L3 Laser System GF Steel grids CRS Scrap containers SiX Controller FLR20 3000W Fiber resonator with chiller unit ASF Fume extraction ACUT Compressed air cutting option ADB Automatic sheet loading system Office Software Office software included

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Iedpjyz Iu Sofx Apmoid Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Isdpfx Apjv U A I Iemjid Max. workpiece weight: 1500 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Iodpfxozcum Ne Apmoid Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower Iisdpfx Aozbub Depmod • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Din 40 spindle taper, 48 station tool changer, Isdjzcy Irspfx Apmjid Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used - : Price ex location: now only €119,000 (net), previously €145,000 (net) plus dismantling, etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Sheet format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (storage system not included in the sale) Original price: €250,000 (net) Manufacturer description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX allows for the decoupling of loading and unloading processes in laser cutting systems. After cutting, a fork unit lifts the processed metal sheet from the change table, while simultaneously a new sheet is transported from the connected storage system via a vacuum unit. As soon as the sheet is positioned next to the laser machine, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With LaserFLEX, the downtime of integrated laser cutting systems is virtually eliminated, even high-speed laser processing is optimally supported. Key features: • Changeover times of approx. one minute (with 3015 format) • Highly automated production processes • Separate loading and unloading operations for the laser cutting machine • Manufacturer-independent integration of laser systems • Flexible storage options with tower or large-scale storage systems • Reduced downtime of the processing machine Isdpfowga E Tox Apmoid • Connection of multiple laser systems in a chained layout • Integration into existing warehouse and production environments • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for the automation of laser systems Increased productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet formats Effective supply and removal for multiple laser systems Intuitive, graphical touch operation with visual status management Innovative, modern industrial design Condition: Good Available: Immediately Location: 46419 Isselburg

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Isdpfx Aev Awgujpmoid Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: new, Year of construction: 2024, PB 4 Bending Center With the Durma Bending Center, you will achieve error-free results with maximum speed and safety, fully automatic tool change, and minimal setup time. The Durma Bending Center, with its robust machine body, excellent precision, ergonomic design, and diverse bending functions, will occupy an important place in your operation. The combinations we can technically implement in punching and laser machines enable maximum time savings in your production processes. Our developed smart consumption, standard production independent of the operator, and Durma CNC Bending Center, which is manufactured after stable thermal conditioning, offer you the opportunity to generate profits against rising energy costs. The Durma Bending Center automatically performs simple and complex bending operations on sheet metal materials with a thickness between 0.5 and 4 mm. With its user-friendly, easy-to-operate interface and software that simplifies part programming, this product will be your solution partner. Technical Data: Iijdpjg Adi Rofx Apmed Maximum bending length: 2800 mm Minimum bending length: 350 mm Maximum sheet metal input length: 3050 mm Maximum sheet metal input width: 1524 mm Minimum bendable width: 150 mm Maximum bending height: 254 mm Maximum bending depth: 50 mm Maximum sheet metal rotation radius: 3300 mm Bending force: 500 KN Pressing force: 1000 KN Maximum sheet metal thickness: For Fe 410 N/mm2 material: 3.2 mm For Acc. Inox 600 N/mm2 material: 2.2 mm For Aluminum 260 N/mm2 material: 4 mm Minimum sheet metal thickness: 0.5 mm Maximum bending angle per stroke: ±135° Extended Functions: Negative bending capability on the last bend: Standard Automatic tool change option: ATS (Standard) Auxiliary clamping tools: Standard Lower auxiliary bending tools: AHD (Option) Upper auxiliary bending tools: AB (Option) Reversed bending arrangement: AB (Option)

Condition: as good as new (ex-display), Year of construction: 2024, HD-FS Smart 3015 Fiber X-axis: 3100 mm Y-axis: 1550 mm Z-axis: 125 mm Max. sheet metal dimensions: 3048 x 1524 mm Max. sheet metal weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: + 0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Iijdjft Sbiopfx Apmjd Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet metal positioning and size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with auto-nesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction system Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer detection, measurement The machine can be inspected and demonstrated at our demo center in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Isdpfx Apsu E Tczsmsid Mild steel: 30 mm Stainless steel: 25 mm Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.

Condition: used, Year of construction: 2008, power: 175 kW (237.93 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, color: black, mileage: 1,001 km, driver cabin: other, emission class: euro4, Vehicle location: Bovenden, environmental badge green Dismantling of Daimler-Benz Atego 1524 L 4x2 with 283.000KM. 6-cylinder engine! Ijdjvhi Rpjpfx Apmsid Engine number: 90291600700768! Camshaft and engine block broken! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,31,642 km, power: 175 kW (237.93 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2026, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,380 mm, loading space width: 2,490 mm, loading space height: 2,390 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Mercedes-Benz Atego 1524 Refrigerated Box Truck THERMO KING T-600 R * First registration: 22.02.2022 * 131,642 km * Automatic transmission * 175 kW (238 hp) * Front axle: 6.1 t * Rear axle, crown wheel 390, hypoid 11.0 t * Axle ratio i=3.909 * Tinted & heated windscreen * Light sensor * Rain sensor * Wheel configuration: 4x2 * 15-tonner * Rear air suspension * Radio with USB port and Bluetooth * ABS & ASR * Disc brakes on front and rear axles * Wheelbase: 4,760 mm * Rear stabilizer under chassis * ECE Ijdpfx Ajx Hmzhopmoid * Driver's comfort air suspension seat * Simple co-driver's fixed seat * Velour seat covers * Air conditioning * Underfold tail lift DHOLLANDIA * Cruise control * Lane keeping assist * Active Brake Assist * Tubeless tyres 275/70 R 22.5 VA/VLA/NLA * Tyres: 1st axle 275/70 R 22.5 11/11 mm * 2nd axle 275/70 R 22.5 5/6/6/7 mm * THERMO KING diesel engine hours: 4,581 * Electric operation: 2 hours * All information supplied without guarantee

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Iedpfxoxvwcxs Apmoid Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, laser wavelength: 1,064 nm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, total length: 5,560 mm, total width: 2,270 mm, total height: 2,520 mm, warranty duration: 60 months, The i-Series from Bodor Laser offers compact fiber laser metal cutting machines with a fully enclosed safety design, ensuring maximum safety and efficiency. Thanks to their small footprint, they are ideal for operations with limited space. The enclosed housing protects the operator from laser radiation and reduces emissions, contributing to a safe working environment. With advanced laser technology, the i-Series machines enable precise and fast cutting of various metal materials. They are the optimal solution for companies seeking space-saving, safe, and powerful cutting technology. Fiber laser: Working area: 3048 mm x 1524 mm Max. workpiece weight: 1000 kg Max. acceleration: 1.5 g Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.03 mm Warranty period: 5 years Safety light barrier: Yes Documentation: Yes Cooling unit: Yes Iijdpfx Ajv S Ewyjpmjd Extraction system: Yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Iedpfx Ajy N Nm Sopmeid Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets