Used Romer Profispray V for sale (35,102)

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Tjdefz Nb Tspfx Af Aoc - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Tsdpfx Afsflmdwj Aoc The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic material support: plastic strips, retracting measuring system: digital display swiveling saw head: manual saw feed: manual mounting: free-standing extraction: external locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Tedpfx Afjz Aibgj Asc Location: Nattheim

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Tsdpfx Afeyg H Dhe Asc 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2018, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2018 Control : Siemens 840 Dsl - Celos Speed : 20000 rpm Movement X/Y/Z : 850/520/475 mm Tool holder : HSK 63 In General: Year of manufacture:2018 Control system:Siemens 840 Dsl – Operate Travel ranges X/Y/Z:850/520/475 mm Speed:20,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Todpfx Afsz A Nz Rs Aoc Speed:20,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 Fluid supply:Coolant + blast air Working table: Clamping area:1,160 x 570 mm Max. table load:1,000 kg Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool diameter:80 (130) mm Max. tool length:300 mm Equipment: Positioning sensors:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Renishaw Touch probe Tool measurement:Tool setter Emulsion mist separator:Mechanical Tool coding:Balluf sensor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Todoz D Taaopfx Af Aec Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Tsdsxwm Dbspfx Af Aoc Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1100 mm Travel distance Y :560 mm Travel distance Z: 510 mm Number of axis: 3 milling machine / machining center Control: HEIDENHAIN TNC 620 spindle chuck: SK 40 / ISO 40 spindle revolutions: 12000 rpm Speed range from: 20 U/min Speed range to: 12000 U/min Tjdpfez A Apusx Af Ajc table size X: 1400 mm table size Y: 560 mm max. workpiece weight: 1000 kg tool changer: 30 - time input Power : 13 kW Rapid traverse: 30 m/min spindle cooling chip conveyor control Heidenhain DMG MORI CMX 1100 V Year of manufacture: 2018 3-axis vertical machining center HEIDENHAIN TNC 620 control 12 bar high-pressure coolant system 30-position tool magazine 30 ISO 40 tool holders included Chip conveyor Electronic handwheel Machine is currently under power Demonstration under power possible by appointment

Year of construction: 2022, condition: new, Service – Preparation of a quotation for a powder coating system from the company Romer. Directly from the manufacturer Tedpefnk H Sofx Af Aoc romer-deutschland Manufacturer of powder coating systems and industrial ovens, plant engineering Delivery time approximately 10 to 16 weeks. Shipping costs will be calculated separately.

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. Tedpfjflq Spox Af Aec A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2014, condition: new, functionality: fully functional, New chamber for manufacturing silicone molds + curing oven. Tedpfx Aoz Ep U Nsf Ajc

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Todpfsz Hq Rbox Af Asc Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access Todpfxjfzq Ste Af Aoc • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: used, Year of construction: 1999, Format: 340 mm Tedpjzcp D Njfx Af Aoc Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Tsdjz Etacspfx Af Aec Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. Todoflmdbjpfx Af Ajc • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. Tedpsfy T Szsfx Af Aec • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: good (used), Year of construction: 2008, Ref. -No.: 10660 Manufacturer: DECKEL MAHO Type: DMC 835 V Todpfx Afjzw Txfe Asc Year of construction: 2008 Type of control: CNC Control: Siemens 840D mit Shopmill Storage location: Halberstadt Country of origin: Germany X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Main spindle drive power: 14 kW Table Dimensions (Lengthxwidth): 1000 x 560 mm Table Load: 800 kg Tool Taper: SK 40 Numbers Of Tools In Magazin: 20 Turning Speeds: 10000 RPM Max. Workpiece Weight: 4,5 t Further information: - Chip conveyor - Handwheel The machine can be inspected while powered on by prior arrangement.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Recirculating air oven, oil/gas-fired, model SOS 80 O Tsdpsc Nbitefx Af Aec Exhibition machine Technical data: Usable chamber dimensions: Width approx. 1200 mm, height approx. 1800 mm, depth approx. 3000 mm Hanging rack available upon request Material: Internal housing: 0.8 mm steel sheet, tightly welded or riveted External housing: 0.8 mm steel sheet, base plate: 1.5 mm steel sheet Paint finish: RAL 1013, standard, powder-coated Insulation material: High-quality mineral wool Insulation thickness: Walls - 160 mm, ceiling: up to 240 mm, density 100 kg/m3 Performance data: Heating type: Oil, heating capacity: approx. 80 kW 1 oil burner with 80 kW capacity Total connection power: approx. 5.4 kW Temperature range: up to 200°C, continuously adjustable Subject to changes and errors in the technical data, information, and prices, as well as prior sale.

Condition: used, Year of construction: 2010, Edge banding machine for pre-glued edges. Tsdpfx Aoz Dp Hvjf Aec

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. Tjdpfx Asb Nzycjf Aec - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm Tjdpfsxw Tg Njx Af Asc # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: used, Year of construction: 2014, CNC lathe, 2 axes, Victor V-turn A20 (SV), Taiwan Year of manufacture: 2014 Control system: Fanuc OiTD with Manual Guide Chuck diameter: 210mm Spindle bore: 52mm Tool turret: 12 positions, VDI30 Tsdpfx Aszhk Uxsf Aoc Turning length: 600mm Turning diameter: 390mm Maximum spindle speed: 5000 rpm Measuring probe: Renishaw Tailstock: MT4 Interface for bar feeder Chip conveyor Coolant tank with pumps Documentation

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Tsdpofz I D Defx Af Aec The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Manufacturer's number: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 pieces Transmission ratio: 1:1 Spindle spacing (center of spindle to center of spindle diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collets Overall height from tool holder (bottom) to gearbox housing (outer edge, top): 218 mm - 4 spindle drives with collet chucks (collets are not included in the scope of supply) - 4 tool spindles, adjustable in steps by twisting within the spindle spacing Dimensions Ø x H: 170 x 218 mm Tsdpfjz Hfclox Af Aoc Weight: 7.7 kg Good condition