Powder Coating Equipment

ROMER /Automatyczna linia Automat

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Lhsdpfx Asfz I D Dsb Uol All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Height: 1900mm Weight: about 100kg Ljdehzgtuspfx Ab Ujhl

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Lhsdpfx Asfz U S Ejb Ujl This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm Lhjdpfx Aok D Ewgob Uol - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 1994, Molecular filling system / diagonal filling Lhodpfxjir Efuj Ab Uel weight 520 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm Lhjdpfx Asvcb U Asb Usl - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Ledpfx Abjfbgz Ie Ujhl type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 3,100 mm, Equipment: documentation/manual, STANDARD EQUIPMENT Special beam and column design, implemented as a complex structure, automatically ensures the bending process without requiring separate control or manual adjustment. The two upper press cylinders are individually controlled (on the Y1 and Y2 axes), allowing for angle correction in seconds. AKAS safety light curtain (motorized) Electric foot pedal with 2 pedals and panic stop function Electronic selection for “Teach-In” programming of each axis Upper tool clamp, two-sided, with mechanical quick tool clamping Inverter – reduced energy consumption High-speed function, 100 tons up to 3 m Operating hour counter, first oil fill AMNC 3i graphic control with 18.5" touchscreen: Y1, Y2 – left and right press cylinders X1, X2 – front-to-back movement of rear backgauges Z1, Z2 – lateral manual movement of rear backgauges (4-axis) R – simultaneous height adjustment of rear backgauges Operation from memory or directly from USB Tool library (only for AMADA tools) Programming: 2D graphic, numerical angle, and Teach-In programming; 3D graphic with external software Modular tool system (835 mm, 415 mm, and segmented version – optional) DigiPro angle measuring system, infrared Technical data: Press force (kN) – 1,000 Table length (mm) – 3,110 Distance between columns (mm) – 2,705 C-frame opening (mm) – 420 Lhodpfx Aszcg Ixeb Uel Stroke (Standard) (mm) – 200 Stroke (Long Stroke option) (mm) – 350 Installation height (Standard) (mm) – 470 Installation height (Long Stroke option) (mm) – 620 Table width (mm) – 180 Table height (mm) – 960 Speed (approach) max. (mm/s) – 200 Speed (working) (mm/s) – 15 Speed (return) (mm/s) – 150 Number of controlled axes – 7 Rear backgauge travel range (X-axis) (mm) – 700 Rear backgauge travel range (X-axis, backgauge tilted) (mm) – 1,020 Rear backgauge travel range (R-axis) (mm) – 250 Travel speed (X-axis) (mm/s) – 500 Travel speed (R-axis) (mm/s) – 160 Travel speed (Z-axis) (mm/s) – 1,000 Electrical requirement (kW) – 16.5 Oil tank (liters) – 160 Control – AMNC 3i graphic control with 18.5" touchscreen DigiPro angle measuring system, cable-free – standard accessory Communication options with the machine – USB, UTP network External programmability – with BendCAM software

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 2020 mm plate thickness 2.0 mm distance between columns 2100 mm angle adjustable from - to 130 Grad Lsdpfx Absxab S Ss Ujhl total power requirement manuell weight of the machine ca. 1850 kg. range L-W-H 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system Lodpfx Aoum Uflsb Ushl - Services & accessories