Used Rotary Autoclave Surdry 1 B for sale (94,868)

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Hsdpfxjiyynde Afhor > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer Hsdpfx Aoiyynwofhjr > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: excellent (used), - Compressed air consumption: - Pressure: 6 bar Hodpfjzbt Szjx Afhor - Consumption per cycle: 24 Nm³ - Required flow rate: 200 Nm³/h - Inlet diameter (mm): - Pipe diameter: 50 mm - Valve diameter: 32 mm - Electricity: - Centrifugal pump power: 15 kW - Hydraulic power for the gate: 3 kW - Gear motor power: 5.5 kW - Process water: - Storage volume: 1,700 dm³ - Make-up water inlet diameter: 50 mm - Make-up water pressure: +3 bar - Discharge diameter: 65 mm - Pump flow rate: 450 m³/h - Heat exchanger: 450 m² - Consumption may vary depending on the cycle and the temperature before and after sterilization.

Condition: like new (used), Autoclaves are used to sterilize packaged products that require high temperatures (+100°C) to eliminate or inactivate pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater challenges in heat transfer. Examples include vegetables in whole, grated, or diced form, and beverages such as smoothies, teas, coffees, or evaporated milk. Hsdpfx Afozbi U Eohor In this type, the basket rotates inside the autoclave, agitating the contents and preventing the pieces closest to the sides of the container from burning. Tray dimensions: 600 mm x 400 mm x 100 mm. Total dimensions of the loading cart: 1500 mm x 1400 mm x 820 mm. Dimensions of the static structure (5 trays): 700 mm x 50 mm x 54 mm. INCLUDES: - Pressure pump. - Heat exchanger: - Brand: Barriquand Steriflow - Type: POT DE RECUPERATION.

Year of construction: 1988, condition: used, power capacity 0 kW volt 0 V ampere 0 A Hsdpfx Aod Ihacofhor Data please see typeplate.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Horizontal drilling machine gomad unit one piece horizontal drilling .Net price fv.Year of production 2004 very good condition machine operational and complete Hsdpfx Afotxabwjhor

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Hsdpfxjug Edke Afher Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. Hjdpoyt Rmgofx Afhor B2B sale only.

Condition: new, x-travel 600 mm y-travel 300 mm z-travel 440 mm table-size 1120 x 260 mm spindle taper ISO 40 spindle turning speed range 35 - 1600 U/min total power requirement 2,2 kW weight of the machine ca. 1,36 t dimensions of the machine ca. 1,65 x 1,32 x 1,65 m Hjdpfsulbcbex Afhor

Condition: excellent (used), Motan DH-1 N-A/B instantaneous water heater, loadable You are buying a functional Motan instantaneous water heater. The device comes from Bundeswehr stocks and is in very good condition. Versatile in use, e.g. as a pool heater Hjdpfxeulgh Ns Afhsr The bestseller for heating swimming pools in no time at all. A 100 m³ swimming pool heats up to 30 C in 3 hours. There is no quicker way to heat water. Perfect for use wherever there is no electricity. Tent camp, weekend house, building site, camping. Its effective output is infinitely variable from 40.5 kW to 128 kW. Despite its high output, the appliance is still portable at a weight of 130 kg. As the water temperature can be set anywhere between 30°C and 90°C, the appliance is can be set as required, the appliance is very versatile, e.g. as a hot water generator for camp showers, for hot water production. Also perfect for koi facilities and koi ponds. Technical data: Output: 35000 kcal/h to 110000 kcal/h infinitely variable (40.5 kW to 128 kW) Largest water volume: approx. 3600 l/h of water at maximum heat output. At max. water flow, the temperature increase is approx. 30°C, i.e. at 10°C. Water flow temp. and 30°C Increase = 40°C Final temperature Drive: Petrol engine Fichtel & Sachs, Stamo 75 Displacement: 75 ccm Power: 2.5 hp at 4500 rpm Consumption: approx. 1.8 l/h mixture 1 : 25 (for the engine!) For the burner depending on the amount of water max.: 24l/h gasoline with max. flow rate of 3600 l/h Tank capacity: 5 liters Dimensions Width: 500 mm, length: 1040 mm, height: 850 mm Weight: approx. 130 kg Manufacturer's price: 8000,-€ You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, The Instrument Reprocessing Revolution Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device – compelling advantages for your practice! Why use four separate instrument reprocessing products when you can have everything in one? With Careclave, you'll save significantly more time, money, and space in your dental practice from day one compared to conventional device combinations: €6,000.00 less in service costs: Because fewer devices mean lower costs. Careclave is not only more affordable to purchase, but it also saves you the extra maintenance and validation costs for additional devices. 45% more space in the reprocessing room: Your practice team knows that workspace in the reprocessing room is valuable. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device. 33% more transfer instruments per cycle: Careclave is a real speed demon. Reprocessing eight hollow instruments in just 16–18 minutes guarantees rapid reuse and thus reduces the need for additional instruments. The revolutionary 4-in-1 solution combines the entire instrument reprocessing process in a single device: 1. Cleaning and Disinfection Careclave® ensures the cleaning and disinfection of up to eight handpieces, prophylaxis handpieces, or ultrasonic scaler tips in just 16 minutes. 2. Maintenance Careclave gently and quickly maintains the handpieces in the Carebox. With the world's first integrated ADDcare maintenance station, the crucial chuck maintenance is also performed directly at the Careclave. 3. Sterilization (Class B) With its patented DRYtelligence® and double-jacket technology, the Careclave offers everything you would expect from a modern autoclave – and more: Sterilize up to 11 kg of instruments on up to 8 trays or in 4 MELAstore® boxes in record time. Thanks to the revolutionary chamber design, reprocessing and maintaining instruments in the Carebox, as well as simultaneously sterilizing other instruments on short trays, is possible in a single cycle. 4. Documentation and Release With ProControl, you can provide proof of flawless instrument reprocessing quickly, securely, and paperlessly. Documentation and release are performed directly on the Careclave® display without the need for additional software. For seamless traceability, the reprocessing protocols are saved to the MELAG USB stick or on the practice network. 4. Documentation and Release Model: Careclave 618 Dimensions (D x W x H): 65.3 cm x 48 cm x 56.2 cm Fits a 60 cm tabletop Internal dimensions: Ø 25 cm x 35 cm Area of ​​application: Dental Power supply: 220–240 V, 50 Hz Power consumption: 3 kW Compressed air connection: 4–8 bar Validability: Validatable Hsdjyk Eqbepfx Afhsr Sterilization class: Class B Documentation: USB, network Chamber volume: 18 liters Load capacity: 11 kg instruments / 2 kg textiles Suitable for textiles: Yes Suitable for hollow instruments: Yes Suitable for endoscopes: Yes Drying: Integrated drying system Color: White Weight: 69 kg MSRP €21,509.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Leybold Trivac D16 B used in good condition. 1 year warranty. Further questions upon contact Hjdpfx Aepbchfjfhor

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. Hedpfx Afsx S Ipwshor CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Hjdpjzpbufefx Afher Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Hedpozn N Auofx Afhsr Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: excellent (used), The geared motors are fully functional, tested, and ready for use. Their technical condition is very good, with only normal signs of wear and tear resulting from operation. Hsdpjznnxuefx Afhsr Condition of individual units: 1 unit has a small dent in the fan cover (visible in the photos). 1 unit has a minor seal damage (crankshaft seal) – visible in the photo. The price applies to 1 unit. Technical data: Manufacturer: SEW-EURODRIVE Motor type: DT80K4/BH6/HR/TF Power: 0.55 kW Motor speed: 1360 rpm Output speed: 54 rpm Three-phase motor Electromagnetic brake Protection class: IP54 Insulation class: F Country of manufacture: Austria The scope of sale includes exactly what is shown in the photos. The geared motors are ideally suited for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. The price stated in the advertisement applies to one unit.

Condition: used, Year of construction: 2003, max. grinding length 2000 mm max. grinding width 1000 mm max. working height with new grinding wheel 600 mm max. workpiece weight 3200 kg max. table load 4500 kg Clamping area 2860 x 1000 mm Grinding spindle drive 26 kW Spindle speeds 1000 - 3000 rpm Transverse feed rate 1 - 5000 mm/min Vertical feed rate 1 - 5000 mm/min Hsdpezn Imxjfx Afhsr Smallest programmable value 0.001 Cooling unit Mechanical extraction system Paper band filter system Grinding wheel balancing system Pneumatic folding dresser Control system ABAMATIC 1 N.D.

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hjdex Equ Nopfx Afher

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 system HL-20000 water chiller Yaskawa servomotor Hsdpfxswxvl Ts Afhor Optional: air compressor

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. Hedpfsq Igyvjx Afhor D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Hjdok Abwlspfx Afhor Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Hsdpfxjyhhqxe Afher Cooling, process water Technical and production installations

Condition: used, Module carriers, subracks, terminal blocks, spring clips, controls, switchgear, PLC -Module carrier lengths: 2x 534 mm 1x 380 mm -Field terminals: 36-pin and 72-pin -Weight: 2.8 kg Hedpfednin Nox Afhjr

Condition: used, Central processing unit, control, switchgear, CPU -Central unit CP476 product number: 7CP474.60-1 -Interface module IF371 product number: 7IF371.70-1 -Analog output module AO352 product number: 7AO352.70 Hodpfx Afsdnin Tjhjr -Dimensions: 153/155/H62 mm -Weight: 0.7kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 30 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 385/160/H255 mm -Weight: 12 kg Hedpjcwuvtefx Afhjr