Used Sepro Sepro Success11 S3 Trans, 2015 for sale (8,068)

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Gbodpfx Ajxrtkwehler Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame.

Condition: excellent (used), functionality: fully functional, load capacity: 60,000 kg, Equipment: UVV, cabin, Rental and purchase possible Godpfeyrf T Ejx Ahlebr

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Gedjxrtb Nopfx Ahlobr Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Godpfx Ajxrtgfshljbr Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Gbsdjuf Rw Tepfx Ahlor Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Gbjdpfxsxrtluo Ahlsr Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: good (used), Year of construction: 2023, robot handling device Sepro S5-25 DI Visual 3 x=700 mm y vert.(telesc.) =1400mm Z=3500 mm (R1 + R2 ) R1 year: 2023 price: 27.500 Euro Gbodpfx Aheuqll Djljr contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2020, Sepro 5 Dual DA 11 x=500 mm y vert=1000mm Z(horiz.)=2500mm (C ) R1 year 2020 price: €16,500.00 contact: Mr. Rainer Eckerle Gsdpfjx Uqfaox Ahlobr

Condition: good (used), Year of construction: 2015, robot handling device Sepro S5-15 S3 SPE x=500 mm y vert=700mm Z=2000mm (without R1 90°) Godpou N Dcyofx Ahljbr year 2015 Stock: 1 · price: €14,500.00 contact: Mr. Rainer Eckerle

Condition: new, * IMMEDIATELY AVAILABLE * Including rack for transporting scaffolding / XXL storage box Technical data: • Brand: Martz • Model: SCAFF 480 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/roadworthiness: 2 years from first registration • Internal dimensions (LxWxH): 480 x 250 x 0 cm • External dimensions (LxWxH): 598 x 255 x 249 cm • Loading height (floor): 55 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 816 kg • Payload: 2,684 kg • Chassis: Low-loader (wheels alongside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Plastic mudguards with checker plate reinforcement • Convenient loading rack, ideal for transporting scaffolding parts • Large accessory box for secure storage of small scaffolding components • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • Maintenance-free KNOTT rubber suspension axles • Reverse automatic device • KNOTT overrunning brake and parking brake • Very robust, bolted and reinforced tubular drawbar • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Rear lane marker lights • Integrated rear fog lamp • Rear frame lighting recessed • Automatic jockey wheel Gjdpfx Ahjx Tixpolsbr Optional accessories (available on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Additional storage boxes • Reversing spotlight • Lashing straps • And much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance, or transit plates (for Germany) can be provided. - Export licence plates including customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers available from stock! We have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Gbsdpoxyi Rvsfx Ahlor Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: excellent (used), Year of construction: 2015, Engel VIPER 20 (2015) X axis demolding stroke - 700 mm Gbjdpfx Aoxy Rarohlor Y axis traverse stroke - 1500 mm Z axis traverse stroke - 2360 mm X axis reach from fixed platen - 925 mm C axis pneumatic swivel axis - yes Nominal payload - 25 kg IMM clamping force - 55-340 US tons

Condition: good (used), Year of construction: 2015, Moretto XD2 TS Mini Dryer – Technical Parameters (copy-friendly) Drying temperature (max): 180 °C / 356 °F Air flow: 3–10 Nm³/h (1.7–5.9 cfm) Hopper capacity: 15 dm³ (0.53 cft) Material capacity (bulk density 0.65 kg/dm³): 9.7 kg (21.4 lb) Total power: 1 kW (1.3 HP) Average energy consumption at 80 °C: 0.062–0.206 kWh Average energy consumption at 176 °F: 0.083–0.276 HP/h Power supply: 230 V / 1 phase / 50 Hz Dimensions & weight Gbodpoyfhyuofx Ahler A: 409 mm B: 334 mm H: 591 mm H1: 556 mm d: Ø 9 mm D: Ø 50 mm F1: 180 mm d1 (mounting): 4 × M6 I: 100 mm F: 120 mm Weight: 13 kg

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen Gbjdpfxsyg Eu So Ahlor 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Year of construction: 2015, condition: used, Moretto DGM 120 S (2015) Gravimetric mixers (GRAVIX Series) These are robust, multi-component systems. In the photos you can see the Gedpfx Ahsy Udkcelsbr characteristic funnels for the various components that the system weighs with extreme precision. The Moretto DGM Gravix 120 S dosing system belongs to the middle category of gravimetric dosing machines, which are characterized by extreme precision and resistance to industrial vibrations. -electrical data: 230V; 50/60Hz; 1kW -weight: 9,35 kg Main technical parameters This model is designed for precise mixing of multiple components directly at the machine neck. • Maximum performance: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001% thanks to the technology of weighing each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (with the possibility of expansion according to the version). • Response speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weighing hopper volume: Optimized for medium-sized batches with free suspension without mechanical interference. _____ Key technologies • VIS (Vibration Immunity System): Allows installation directly on injection molding machines or blow molding machines without loss of accuracy due to machine movement. • Rotopulse: Special device for micro-dosing of additives (from 0.08 g), which prevents the formation of domes in the material. • Double-Effect Mixer: Hemispherical mixing chamber ensures a perfectly homogeneous mixture without "dead spots". • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet or Modbus

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, MB Conveyors PA ALL Ligth conveyor (2015) L=205cm W=50cm H=110cm(adjustable) Gbsdpfxoyf Nace Ahlor

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Gbjdpfx Ahozbg Ezolor Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: excellent (used), Year of construction: 2015, Number of axis: 3 X- 580 mm Y- 1000 mm Z- 1500 mm Reach: 1500 mm Payload: 3 kg Possible buy with rotary unit Gimatic OFN30-90SD Gbodpfsy Ud Hdsx Ahler or rotary unit Gimatic RBT30

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Godpfx Ajyu Nqmohlobr Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO Gjdpfjy Tn Enox Ahlobr ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Position 2: Top Sanders VIET-S3 - VALERIA Gsdpfx Ahex A Tayolsbr

Condition: ready for operation (used), Year of construction: 2006, Belt sander manufactured in 2006. This VIET S3 223TM features a sanding width of 1300 mm and includes a 1st cross-belt unit along with a 2nd combination unit for calibrating and sanding. The sanding shoe is equipped with contact segments spaced 25 mm apart, ideal for sanding painted surfaces. If you are looking to get high-quality sanding capabilities, consider the VIET S3 223TM machine we have for sale. Contact us for further details. Gjdpfx Ahezt A I Ielobr Used wide-belt sanderBrand: VietType: S3 223TMYear of manufacture: 2006Technical data- Sanding width: 1300 mm- 1st cross-belt unit- 2nd combination unit: calibrating and sanding shoe.- The sanding shoe is equipped with contact segments spaced 25 mm apart and is also ideal for sanding painted surfaces- Brush roller for dust removal from sanded surfaces- Vacuum conveyor belt- Ionization bar to prevent static buildup at the machine outlet.- The control display was replaced with a new one 2 years agoNote:The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2010, working width: 1,350 mm, Belt sander manufactured in 2010. This VIET S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the VIET S3 333 belt sander we have for sale. Contact us for further details. • 1st Sanding Unit (Composition): Spinbrush • 1st Sanding Unit (Motorization): INV 4 kW • 2nd Sanding Unit (Composition): Brush • 2nd Sanding Unit (Motorization): INV 4 kW • 3rd Sanding Unit (Composition): Brush • 3rd Sanding Unit (Motorization): INV 4 kW • Conveyor Group: 3–16 m/min • Conveyor Group (Motorization): INV 3 kW • Adjustment/Rise (Motorization): MTR 0.37 kW • Vacuum Pump (Motorization): MT 4 kW • Mass: 4170 kg • Workpiece Thickness: 3–160 mm • Operating Voltage: 3 AC - 400 V • Frequency: 50 Hz Gsdpfx Aozt Artohlobr • Current Draw: 48.9 A • Motor with Max Current Draw: 8 A • Minimum Compressed Air Pressure: 6 - 86 bar-Psi • Maximum Compressed Air Pressure: 8 - 116 bar-Psi • Compressed Air Consumption: 1441 Nl/min • Minimum Suction Flow Speed: 25 m/s • Minimum Suction Capacity: 6190 m³/h • Noise Level (Idle): 75 dB(A) • Noise Level (Operating): 76 dB(A)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. Trockenlufttrockener Gbsdpfszt Amdjx Ahlor Hersteller: WITTMANN Typ: DRYMAX S3 Baujahr: 2007 Trockenbehälter: 2 Stück Behälter je 75 Liter Inhalt Trockenlufttemperatur: max. 200° C

Condition: refurbished (used), Dry cleaner/ Friction cleaner Gjdpfx Aeztm Edjhljbr with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness