Sodick SL400G (2015) wire cutter (only 4.355 hours!)

Sodick SL400G

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Ledpfjyit Ulox Abyohh

Condition: new, Year of construction: 2019, Balancing Machine Haimer TD 2009 Condition: As new (unused) Machine weight: approx. 350 kg Terminal weight: 50 kg Spindle speed: 300 – 1100 rpm Measurement accuracy: < 0.5 gmm Smallest measurable unbalance: 0.5 gmm Pneumatics, required operating pressure: 0.5-0.6 MPa, 5-6 bar Air consumption: 30 l/h Operating voltage: 230 V Frequency: 50-60 Hz Lhjdpfxjxz R Uro Abysh Total connection current, protected on site: 1 x 16 A Residual current circuit breaker: Type B Power consumption: max. 1.0 kVA Current consumption: max. 7.5 A Noise emission: < 70 dB Protection class: IP 50 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition Ljdpfecxxx Rex Abyshh

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: Lodpfx Abeyq H Arjyehh X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Lhsdpfx Aouddimebyoh Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. Lhedpjlbgfcofx Abyeh External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Lhsdpfxey E Ixxs Abyoh Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm Lhjdpfjxd R Hmsx Abyoh - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Condition: used, Year of construction: 2010, Mazak INTEGREX 300-IV – Technical Data Year of manufacture: 10/2010 Model according to nameplate: INTEGREX 300-IV Serial number / Ass. No.: 221788 Power on time: approx. 50 000 hours General Machine Data Ledeyxm S Rjpfx Abyehh Machine type: Turn-mill center Control: Mazatrol Matrix Chuck: Kitagawa B-212 (12”) Max. turning diameter: approx. 762 mm Max. machining length: approx. 1524 mm Bar capacity: approx. 76 mm Main spindle speed: 4,000 rpm Second spindle speed: 4,000 rpm Milling spindle speed: up to 12,000 rpm Tool magazine: 40 stations C-axis: 0.001° B-axis: 0.001° indexing X-axis travel: approx. 630 mm Y-axis travel: approx. 230 mm Z-axis travel: approx. 1585 mm Main power supply: 3 AC, 400 V, 50/60 Hz Control circuit: AC 100 V / DC 24 V Max. current: 80 A

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Lodpfx Abow Rf S Eeyohh Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation