Used Sheet Metal Bearing for sale (38,383)

Condition: used, Year of construction: 1998, pressure 25 t working area 2535 x 1280 mm plate thickness 0-8 mm punch diameter max. 76 mm Iajdpjyy A Ecsfx Alzsr tool change unit 19 no. of strokes 600 Hub/min Max. Positioning speed 108 m/min dimensions of the machine ca. 7,5 x 7,8 x 2,4 m total connected load 35 KVA

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke Ijdpfxsif Sg Se Alzjar - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: refurbished (used), Year of construction: 2020, operating hours: 11,975 h, Processed materials: Mild steel, stainless steel, aluminium alloys, copper, brass Iedpfey Ddqnsx Alzear Automatic transverse sheet pallet changer – sheet format 3000×1500 Accessories – Optical device for weld seam detection on round, square, rectangular, oval/flat tubes – Delicate tube loading station supplement – Motorised front tube collection table, max length 4500 mm – 2D cutting head with: Active Focus – automatic focus adjustment, Active Beam – automatic laser beam diameter adjustment, sensors for automatic protection glass temperature monitoring, Fiber booster – automatic 18-position nozzle changer, Active Weld – Fly cut.

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm Iodpjxwnbuofx Alzoar - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, CNC-controlled electric motor-driven precision sheet metal folding machine / swivel bending machine Maximum bending length: 2,600 mm Maximum bending capacity with a 25 mm wide bending rail: - Steel sheet DC01-A with a tensile strength of approx. 350N/mm² or material S235JR: 3.5 mm - Stainless steel sheet 304L: 2.3 mm - Aluminium sheet H24 with a tensile strength of approx. 145N/mm²: 4.5 mm - Zinc sheet according to DIN EN988 with a tensile strength of approx. 190N/mm²: 2.3 mm Upper beam rail: 160° Upper beam stroke up to 240 mm Lower beam height approx. 830 mm Drive power: 9 kW Dimensions without rear gauge approx. 4.1 x 1 m x height 1.9 m Weight: 3,500 kg - Manual crowning device for the folding beam - Rear gauge with 8 folding stop fingers - Stop range 10 to 750 mm (optionally 1,000 mm or 1,500 mm), Adjustable travel speed up to 500 mm/sec. Iaodpfx Asy Afurolzer

Condition: new, Year of construction: 2026, Heavy-duty manual universal precision sheet metal folding machine (swing bending machine) in very robust cast-iron construction – brand new Maximum bending length: 3,050 mm Maximum sheet thickness: - Steel – Precision sheet DC01-A with tensile strength approx. 350N/mm² – 2 mm - Aluminium sheet H24 with tensile strength approx. 145N/mm² – 3 mm - Zinc sheet according to DIN EN988 with tensile strength approx. 190N/mm² – 2.5 mm Upper beam – opening range 250 mm – - Allows box bending up to 250 mm. Iasdpfxey Afgzo Alzer - Optionally available with motor-driven upper beam actuation. Maximum bending angle: 135° Lower beam adjustment range: 90 mm Bending beam adjustment range: 90 mm - An ideal machine for the production of pipes, pipe segments, and radius parts Dimensions without rear gauge approx. 3.6 m x 570 mm x height 1.3 m Weight: 3,000 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed Iajdpfx Ajy Ddv Rolzsr - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SN061856, 12-month warranty Iodpfx Aey Ar Dgslzoar

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Highlights & Features: Precision: Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Iodpfx Aley Ar A Njzear Wet grinding binds grinding dust and increases safety in the production process. Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. Iajdoqxandjpfx Alzjr In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. Iaedpfx Asv Tyr Iolzjr The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. Iaedpfx Ajf Eywwslzsr There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. Iodpfohz Twwsx Alzjar So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, working width: 1,300 mm, The SRS 1300 is an industrial finishing machine for sheet metal that integrates deburring, edge rounding, and surface finishing in a single pass, optimizing the process after laser or plasma cutting. ⚙️ Main technical features Working width: 1300 mm Configuration: 2 abrasive roller heads 4–8 rotating brushes Installed power: 39 – 88 kW Materials: steel, stainless steel, aluminum, brass Working thickness: approx. 0.5 – 50 mm 🚀 Performance Complete process in a single pass Removal of burrs, oxides, and slag Homogeneous edge rounding Line grain or non-directional surface finish Parts ready for painting, welding, or coating Isdpfx Aleyz Tdljzear High repeatability and reduced manual work

Condition: new, Year of construction: 2026, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Isdpjg In Azofx Alzear Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine * Changeable sieving system * 0.34 kW vibratory motor Iodpsw Hpfvjfx Alzjar * Start/Stop thermal switch It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system.

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity Iajdpew Hb Tfofx Alzer * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Iaedpex Sz D Iofx Alzor Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 1996, functionality: fully functional, We are offering this used Finnpower TP2020BIF2/AM sheet metal processing center, year of manufacture 1996, fully operational and ready for use. The machine is currently still in full operation and will soon be replaced. Manufacturer: Finnpower Iasdpfoyzfh Njx Alzjr Model: TP2020BIF2/AM Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 15257, We are currently offering a 'Thalmann' double folder in excellent condition for sale. Exact designation: THALMANN - Double Folder Bending Machine – Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT-System The machine is in very good technical and visual condition and fully operational. Reason for sale: The Thalmann is being sold due to investment in a new EVOBEND double folder. The machine operates flawlessly and is in daily use. Technical details (as per 12.03.2026): • Control operating hours: 5302.1 • Pump operating hours: 853.9 • Number of cutting cycles: 2,947 • Total number of sheets processed: 11,800 Machine data: TD 150 – 6.4 m S5 with DFT® technology • Working length: 6,400 mm • Insertion depth: 1,250 mm • Bending beam width: 10 mm + 10 mm additional rail • Max. bending capacity: S = 20 mm, 1.5 mm mild steel (Re 275 N/mm²) / 2.0 mm aluminium / 1.0 mm stainless steel • 180° folding performance: 50% of bending capacity • Max. bending angle: 143° (1.0 mm: 135° / 1.5 mm: 130°) • Bending accuracy: +/- 0.5° (with crowning) • Number of grippers / travel path: 4 units, +1, +1 / 15 mm – 1,250 mm • Max. gripper opening: 35 mm • Number of backgauge fingers / travel path: 4 units / 5 mm – 1,150 mm • Backgauge repeatability: +/- 0.1 mm per program cycle • Electrical connection: 400 V / 50 Hz / 3 phases + PE Iodsypxx Aepfx Alzjar • Rated current / fuse / pump: 32 A / 63 A / 22 kW, 75 ccm • Dimensions: 8,050 x 2,250 x 2,100 mm • Weight: approx. 10,000 kg • Compressed air connection: 6 bar (Incl. control panel, total of 6 servo grippers, 6 backgauge fingers) Included additional equipment and features: - Free-running cutter / rotary shear: for 1.5 mm steel, 1 pc. - Bowed clamping jaw (bottom), ratio H x D = 1: 2, 1 pc. - Conical backgauge with 2-zone function: 1 pc. - Additional gripper / finger stop unit: 1 pc. - Clamping jaws made from high-strength HARDOX steel: 1 pc. - Hydraulic sheet thickness adjustment: 1 pc. - Automatic sheet loading and support table: 1 pc. - M-Guard remote maintenance support (instead of TeamViewer): 1 pc. - LED bending line illumination with RGB color selection: 1 pc. Additionally, the machine is designed to allow for technical retrofitting of the 'turning unit' (see the THALMANN AG website for further information, as per previous owner – no guarantee). All details without guarantee – errors excepted.

Condition: used, Load capacity: 3 t Opening width: 38 mm Weight: 15 kg Iasdpfx Aeb Nwkxjlzor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, total length: 1,100 mm, total width: 1,320 mm, total height: 1,050 mm, input frequency: 50 Hz, Sheet Pan Cleaning Machine KD-Putz Tubur Premium Sheet cleaning machine for baking trays / perforated sheets short side raised stainless steel construction with oiling unit & sheet pan trolley Connection: 400V, 16A-CEE plug Dimensions: 1320 x 1100 x 1050 mm (W x D x H) Iasdpfx Ajyv U Nfslzer Used machine from bakery

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, Sheet Pan Cleaning Machine Jeros 5015/828 for 2-edge baking trays short side raised stainless steel design Iajdjyaklcspfx Alzsr with oiling system DGUV V3 tested exclusively by us Connection: 400V, 16A-CEE plug Used machine Visit us!

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW 3 & 4 Edge Sheet Cleaning Machine NEW NEW Single-operator control Stainless steel design, mobile Maximum sheet size: up to 600 x 800 mm Pull-out collection tray at the bottom Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of the tray/sheet cleaner is also evident in its ability to process 4-edge trays with edge heights up to 24 mm. Contaminants are collected in a pull-out, easy-to-empty tray located beneath the cleaning unit. The machine is fully mobile and can be effortlessly moved to any desired location after use. The entire frame is shot-peened, creating surfaces that are as smooth and hygienic as possible. Iedpfxow S Slno Alzoar Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand-new machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet cleaning up to 600 x 1000 mm Sheet greasing/oiling Service package Delivery service Commissioning & training Visit us!

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. Iaedsyga T Nepfx Alzer The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.