Used Storti Rm 500 for sale (20,164)

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland Cedpfxoyga Uts Apterg • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), Cedpfx Aox Svm Repterg with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Crsdpfxjrivv Ee Aptog Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Year of construction: 1998, machine/vehicle number: 098211, KP09 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1998 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Cedpjzxq Uyjfx Aptjrg Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco

Condition: used, Year of construction: 1997, KP03 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1997 Cedpfx Aezxq N Deptsrg Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco used

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up. Cedpfszw Raaex Apterg

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Crodpfx Apszb Aktetsg Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 Crjdpezytzrsfx Aptsg • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The chain and hook, as shown in the photos, are included. Technical data: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection class: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Cjdpfx Apozvqk Astsrg Used hoist, in the condition shown in the photos. Important information: one of the mounting bracket elements is partially broken off, which is clearly shown in the photos. This damage does not affect the operation or functionality of the hoist. Sold exactly as shown in the photos. PRICE INDICATED IS FOR 1 UNIT.

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Semi-automatic spiral binding machine from the German company RENZ: • Controlled by a touchscreen display Crsdpfxezur Hie Apteg • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm • Mobile, easy to move • Includes a receiving table • No special operator training required 230V power supply Weight: 550 kg

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spiral diameters range from 3/16″ to 1 1/8″ Crodpfxozur Efs Apteg Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: used, mileage: 34,800 km, power: 110 kW (149.56 HP), first registration: 06/2017, fuel type: diesel, overall weight: 5,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,219 mm, total width: 2,310 mm, total height: 3,180 mm, loading space length: 5,205 mm, loading space width: 2,200 mm, loading space height: 2,240 mm, Equipment: central locking, tail-lift, Equipment: Dholandia tail lift 1500 KG * Power steering * Partition wall * Central locking * Twin tyres * Side door on the right Crodpezxx Nrjfx Apteg * Tachograph * Trailer coupling, towable load 3500 KG Air conditioning: No air conditioning or climate control The vehicle has the following internal dimensions: L 5.20 m, W 2.20 m, H 2.24 m Payload: 1900 KG The vehicle is in very good condition! Only 35,000 km original mileage! New TÜV + AU available for an additional cost Financing possible via Santander Bank

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Crjdpfjzxr Insx Apteg Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: good (used), Renz Punch SU 500 Perforator This machine is in very good condition. The set includes a base for the machine. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforating machine with a working width of up to 500 mm Designed for continuous operation and heavy loads Function cycle activated by a foot pedal Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforating strips Available with or without a cutout for the hanger Power supply: 3-phase, 380V. Weight: 170 kg. Crsdpfjzt H Rtsx Aptjg

Condition: good (used), Renz Punch 500 perforator The device is in very good condition. New model with regulation Electric drive, foot pedal control. Crsdpfxjzt H Rgs Aptsg The set includes a 3:1 perforation tool, a 4x4mm hole + a cutout for the pendant. Manufacturer’s description: Perforation device with a working width of up to 500 mm The device is designed for continuous operation and high loads The work cycle is activated by a foot pedal Perforation of up to 40 sheets (4 mm) in one cycle Quick and easy replacement of perforating strips Possibility of using strips with/without a recess for the hanger Possibility of using QSA strips (quick format change by turning off selected needles without having to remove the strip) Possibility of using two-part strips – one tool allows perforation of both books without a recess for a hanger and calendars with a recess for a hanger (in this case, perforation without a recess for a hanger up to 465 mm) Device with 3-phase power supply Weight 120kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) Codpfx Apjzw Uubstsrg • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm Codpoza Eipsfx Aptjrg - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: good (used), Welding rotary table KT 500, with 100 mm through-hole Load capacity, horizontal: 500 kg, tilted: 250 kg Power supply: AC 380 V, 50 Hz Rotary motor: AC 400 W Table diameter: 700 mm Height: 700 mm, width: 800 mm, length: 800 mm Weight: 155 kg Tilting range, continuously adjustable electrically: 0 – 90° Speed: 0.3 – 2.5 rpm Welding current transmission, max.: 500 A Includes: hand-held remote control, foot-operated remote control Optional extra: Quick-release chuck Diameter: 400 mm, €530 Crjdsb U Havopfx Aptsg CE marking/approval

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system. Cjdpfx Aezrfcropterg

Condition: excellent (used), I am offering for sale a professional LeCroy WaveJet 354A digital oscilloscope, designed for laboratory, service, and industrial applications. This is a high-quality measuring instrument with a bandwidth of 500 MHz and a sampling rate of 2 GS/s. Technical specifications: • Manufacturer: LeCroy • Model: WaveJet 354A Cjdpfx Apszru Sietorg • Bandwidth: 500 MHz • Sampling rate: 2 GS/s • 4 analog channels • USB port • Built-in carrying handle • Power supply: 90–264 V AC, 47–63 Hz Condition: • Used, in good visual condition with normal signs of use. • The device powers on and functions correctly – the display is working, as can be seen in the photos.

Condition: new, functionality: fully functional, empty load weight: 226 kg, maximum load weight: 524 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, Year of construction: 2026, MARTZ High-Sided Trailer 250, 0.75T NEW VEHICLE Internal dimensions: 254cm x 151cm Total weight: 750 kg Payload: 524 kg Crsdozlyxbepfx Apteg Unbraked, single-axle high-sided trailer Bolted and galvanized steel frame Galvanized steel side panels, 40cm 15mm thick, robust and non-slip screen-printed plywood floor 13-pin electrical system Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Replacement of steel side panel with aluminum side panel - Extension side panels, steel or aluminum - Integrated loading ramps, steel or aluminum - Mesh structure - H-frame - Motorcycle support rail - Flat tarpaulin with or without bows - High tarpaulin - Mesh, coarse or fine - Spare wheel with holder Further accessories available upon request! Images are for illustrative purposes and may show optional accessories that incur an additional charge. Plus vehicle registration document and freight to Gera, €125 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Wide selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: new, Year of construction: 2026, Your contacts at our company: Crsdpfxsdd Ev Ne Aptog Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in the scope of delivery: 1x End upright extension, new Design: Universal Material color: RAL 5010 Prussian blue Overall height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Hole grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.83 kg / piece Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions - Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Crodpfoi Euu Usx Apteg Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.

Condition: good (used), The scope of delivery includes: 217x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Crodpfx Apji Euvcetog Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.

Condition: good (used), The scope of delivery includes: Codpfsi Euu Rex Aptjrg 1x used shelf connector Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.