Used Genome Sequencer for sale (353)

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply Nodpfx Akoxqnvrjfocr 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, functionality: unexamined, Ferwood Code: RU0010016 - Manufacturer Code: 2-083-02-7816 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Ncjdpfswtgb Usx Akfsr

Condition: used, This listing is for a Qiagen PyroMark Q24 Advanced Sequencer For advanced methylation and mutation quantification in long sequence runs using Pyrosequencing Advanced technology, software, and chemistry for long sequence runs Quantitative methylation analysis at consecutive CpG or CpN sites Improved quantification of sequence variations at any sequence position Easy and improved base calling functionality Assay versatility on the same instrument and in the same run PyroMark Q24 Advanced has improved Pyrosequencing technology to provide even better real-time sequence-based detection and quantification than before. PyroMark Q24 Advanced features advanced technology, software, and chemistry, and is highly suited for analyzing any kind of sequence variation, particularly DNA methylation at CpG or CpN sites, complex mutations, or for de novo sequencing applications such as microbial typing. Can be refurbished on request, refurbishment not included in price. Nedpfx Akjxzh Suofscr

Condition: used, This listing is for Roche GS Junior 454 Sequencer Genome Sequencing Unit Njdpexzh Szjfx Akfjcr

Condition: used, This listing is for the AATI Fragment Analyser capillary electrophoresis system The unit is in full working condition and is ready for immediate use The AATI Fragment Analyzer is an advanced automated capillary electrophoresis system designed for precise analysis of DNA and RNA fragments. Developed by Advanced Analytical Technologies Inc. (AATI), the instrument provides high-resolution sizing, quantification, and quality assessment of nucleic acid samples. Widely used in genomics, molecular biology, and next-generation sequencing workflows, the system streamlines fragment analysis by replacing traditional gel electrophoresis with a faster, automated process. It allows laboratories to process multiple samples simultaneously, delivering reproducible results with minimal manual intervention. The instrument supports a variety of assay kits for DNA and RNA analysis, enabling applications such as NGS library quality control, PCR fragment verification, and RNA integrity assessment. With integrated software for data analysis and reporting, users can easily visualize fragment distribution, concentration, and size profiles. Key Features: Automated capillary electrophoresis for DNA and RNA analysis High-resolution fragment sizing and quantification High-throughput sample processing Ideal for NGS library QC, PCR product analysis, and RNA quality checks User-friendly software with clear electropherogram and gel-style outputs Ncedpsyr Nl Sefx Akfor The AATI Fragment Analyzer is a reliable solution for laboratories requiring accurate nucleic acid fragment analysis with improved efficiency and reproducibility

Condition: excellent (used), Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for the fully automated preparation of PCR and qPCR reaction solutions. It is designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to be integrated into automated workflows. Nodpsyk Uxnofx Akfocr Automation: It automates the pipetting and dispensing of PCR components (samples, master mixes, primers) into 96- or 384-well PCR plates. Volume Range: The hardware is designed for aspiration and dispensing volumes up to 1 ml. Traceability: It features automatic barcode tracking on accessories and consumables to ensure complete sample traceability. Software Integration: The instrument uses FLOW software, which imports test requests from laboratory information management systems (LIMS) and reports results. The software also allows for user-friendly configuration of PCR setups. Flexibility: It can be used either as a standalone instrument for PCR setup or in a "FLOW Flex" configuration for combined primary sample handling and PCR preparation. Accessories: Optional accessories, such as cooling blocks for PCR plates, are available to maintain the integrity of temperature-sensitive reagents. Applications Experts from Hamilton and Roche point out that the instrument is suitable for a wide range of genomic applications: Gene expression analysis Genotyping Sequencing Detection of pathogens (e.g., SARS-CoV-2 tests) Clinical diagnostics Power supply: 115 V AC to 230 V AC (+/- 10%) Frequency: 50/60 Hz +/- 5% Power consumption: 600 VA Dimensions: 112.4 × 90.3 × 100.6 cm (W × H × D) Depth without automatic loading: 79.5 cm Weight: 180 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping Njdpovzr Nbsfx Akfjcr proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Nsdpexzgzuefx Akfjcr Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Nodpfx Aksxzg Nxofecr Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 123713 € 2338.18 € 320 to 4050 mm Y1 / Y2 / X Achse 365 mm 3600 mm 450 mm Nedpfjwirfqox Akfocr 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 154 mm 250 l 18.5 kW 5250 mm 1770 mm 2850 mm 20000 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 171300 € 3237.57 € 400 to 4050 mm Y1 / Y2 / X Achse 365 mm 3400 mm 510 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s Ncjdpfswirfkjx Akfjr 250 mm 1050 mm 154 mm 250 l 37 kW 5750 mm 2110 mm 3640 mm 27760 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TURKEY optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 112813 € 2132.17 € 320 to 3050 mm Y1 / Y2 / X Achse 365 mm 2600 mm 450 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 154 mm 250 l 37 kW 4300 mm 1820 mm 3330 mm 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence Ncodpfswirbfex Akfer - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 88113 € 1665.34 € 220 to 3050 mm Y1 / Y2 / X Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 140 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 4250 mm 1770 mm 3000 mm 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" Ncedpewiqudjfx Akfor - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Hydraulic or pneumatic tool clamping for Euro or Wila tools

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Nsdoylyhdepfx Akfecr Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Njdpeyvpt Eofx Akfocr

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 187100 € 3536.19 € 400 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3400 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 2 x 11 kW 5750 mm 2110 mm 3450 mm 27780 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence Njdpfewir A Ajx Akfecr - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: used, Year of construction: 2017, machine/vehicle number: LC611, Used Tetra pak UHT system 5000 LPHTechnical Specifications & Performance DataThis Tetra Pak UHT System Steritherm (model VTIS C-4) is a robust, second hand processing unit designed to deliver consistent ultra-high temperature treatment for beverage production and industrial packaging workflows. Engineered for high reliability and easy integration with downstream filling and bottling equipment, it provides stable thermal performance and hygienic operation for modern beverage production lines.Manufacturer: Tetra PakModel: VTIS C-4 SterithermManufacturing year: 2017Capacity: 5000 L/hMax process temperature (indicative): up to 148 °C (per inspected pressure section)Included equipment: Alfa Laval SHL-20 homogenizer (250 bar), Alfa Laval H7-RC plate heat exchanger (198 L), pump station with Alfa Laval LKH-10 and LKH-107, ABB drive, and CIP regulatorDesign intent: Continuous UHT treatment with integrated homogenization and plate heat exchangeConstruction: Hygienic stainless steel process componentsAdvanced Automation & Control SystemsThe system includes a computer control system for precise process management, delivering stable time–temperature profiles and consistent product quality. Automated supervision of key parameters helps reduce product losses and optimizes energy usage. Interlocks and instrumentation support safe operation throughout heating, holding, and cooling stages.Centralized computer control for process sequencing and alarmsIntegrated CIP regulator to streamline cleaning proceduresProcess instrumentation for pressure, temperature, and flow controlComponent-level CE marking on included Alfa Laval equipmentProduction Line Integration CapabilitiesDesigned to fit seamlessly into a used bottling line or new production layouts, this UHT system interfaces smoothly with upstream raw product handling and downstream filling and packaging machinery. It supports industrial packaging workflows for PET and Glass bottling operations by supplying thermally treated product to fillers.Inline compatibility with fillers, buffer tanks, and conveyorsIdeal for beverage production environments needing continuous 5000 L/h throughputFlexible process connections for integration with existing piping and CIP loopsSuitable for second hand upgrades or capacity expansionsMachine Condition & Maintenance HistoryThis unit is presented as a ready-to-run, second hand UHT system. Ancillary components show evidence of professional upkeep, including a recent service marking on the Alfa Laval pump (dated 04/24) and inspection records on pressure-rated parts.Operational status: ready for operationInspection labeling present on pressure sectionsService marking observed on included pump componentOperational Performance & VersatilityEngineered for consistent UHT processing, the line’s Steritherm design supports stable thermal treatment, homogenization for product consistency, and effici... Ncsdpfx Akjy Ef T Tefsr

Year of construction: 2023, condition: ready for operation (used), total width: 1,800 mm, total height: 2,700 mm, pressing force: 143 t, product length (max.): 4,000 mm, Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details. • Type: CNC hydraulic press brake • Working length: 3,100 mm • Max bending thickness: 6 mm at 3 meters • Distance between uprights: 2,550 mm Njdpfxoy E I Adj Akfjcr • Throat depth: 400 mm • Daylight opening: 515 mm • Punch stroke: 250 mm • Table width: 80 mm • Fast approach speed: 0–180 mm/s • Working speed: 0–20 mm/s • Return/upstroke speed: 0–160 mm/s • Max hydraulic pressure: 275 bar • Main electric motor power: 15 kW • CNC control: CybTouch 15 PS (15" touchscreen, 2D programming, automatic bend sequence detection) • Axis configuration: Rear gauge with 2 controlled axes (X + R) Additional equipment • Two heavy-duty front support arms • Front guides movable longitudinally • Adjustable-height front supports • Laser safety system AKAS-LC • EU-compliant operator safety system • Pneumatic folding/hemming table • Mechanical grip for lower tools • Tooling included: • Punch: Knife P120.35.R08, height 120 mm, angle 35°, radius R0.8, sections 3 x 835 mm + 1 x 805 mm • Bottom die/block: Model M460.R, V openings 16/22/35/50 mm, sections 3 x 835 mm + 1 x 805 mm, suitable up to 6 mm sheet metal

Condition: refurbished (used), Key features of the device: Flexible, modular device concept Configuration of the device according to the specific requirements of the products Nsdpfx Akstrwfusfecr Stainless steel design Can be combined with a sheet loading robot Variable outputs Automatic production sequence Repeatable product quality Dividing range: 40 - 75 gr Capacity: max. 4000 pcs/hour Dimensions: 2600x1125x2550 mm

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Nsdpferu Un Hsx Akfjcr Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. Ncsdexnlflspfx Akfor - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Njdpfx Akjhbu E Hsfocr Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: three-phase, machine/vehicle number: 2026, Dishwasher Model: R-Line 1500 with base Quick-ready system Euronorm 500 2.4 liters of fresh water consumption 7 washing programs with 3 easy Rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Sequence / drain pump Connection: 400 V, 7.7 kW, 16A-CEE plug Dimensions: 600 x 700 x 1128 mm, WxDxH Ncedpfxofffhxs Akfsr with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection Ncsdpfx Akjxavrgefjr - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 159300 € 3010.77 € Ncodeynm Atspfx Akfjr 320 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3600 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 5300 mm 1910 mm 3230 mm 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option