Used Suhner Typ B 5 for sale (80,998)

Condition: new, working width: 5020: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 5020 - HIGH PROFITABILITY Kledorzx Ebjpfx Aafew - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 5020: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 5020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE Kodpfxjrzx Efe Aafjlw - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Klsdpsy Hgnnefx Aafow Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: excellent (used), Charger Timetronic ECO JH Type E230VG24/50B-ETIS Year of manufacture: 2004 Transport dimensions: Length: 39.5 cm Ksdpfew R Nvnox Aafjlw Width: 26.5 cm Height: 34.5 cm Weight: 25.5 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DFZ-132-00-000F, We are offering these 10 new ECKOLD mobile clinching pliers, type MZD 25/PH Kraftformer, year of manufacture 2025, including pneumo-hydraulic pressure intensifier PHD-002-00-000C and complete tail insert MZD25/3. For a detailed description, please see the attached invoice copy. The stated price of €5,000 (negotiable) is per unit. If you have any questions or need further information, feel free to send us a message or call us. Kljdpeyfz T Ijfx Aafjw

Condition: new, - new -manufactured by Holzkrafttype HBS 533 SET- Especially quiet and precise running thanks to atorsion-free machine housing and asolid base made of sheet steel- Large sized gray cast iron saw table from onePiece with a precisely polished and polished surface- Comfortable laser device for cutting line marking- Saw band quick tension via eccentric lever on theMachine back- Standard with two speeds- Precise 3-roller saw band guides at top and bottom- Fast cutting height adjustment via rotary knob andRack with millimeter scale- Smooth-running aluminum rip fence withEccentric quick clamping and magnifying glass- Standard miter fence, both sidesadjustable by 60 °- Safety switch for automatic shutdownwhen opening the doorTechnical specifications:Working table dimensions 680 x 530 mmCutting speeds 850/430 m / wheel D 530 mmMax. Cutting height 270 mmMax. Cutting width with stop 474 mmMax. Cutting width without stop 514 mmSaw blade length 3865 mmPrecision guide 3 rollers top / bottomSaw table tilt -10 to +45 °Motor power 400 V / 50 Hz / P2 2.25 kWWeight 163 kgDimensions 1024 x 793 x 2048 mmSuction nozzle diameter 2 x 100 mmincluded:1 saw band set, length 3865 mm, 3 partsItem No. 5155303SET Klsdpfx Aajvwgamjfow

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 Kledpovwf Szefx Aafow pressing cylinder pneumatic 4 table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Klodpfodrr U Ssx Aafsw Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Kljdpfxsudk Ams Aafjw

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Kljdpfjudk Agex Aafsw

Condition: ready for operation (used), functionality: fully functional, The Lutetia Type 5 Double Jacketed Tumbler stands out as a highly efficient solution for industrial users seeking precise control over their mixing and maturation processes under controlled temperature conditions. Once integrated into the production line, it ensures consistent product homogeneity while providing accurate management of thermal parameters. This makes it ideally suited for meat processing and value-added product workshops. Kljdoyvrtnepfx Aafjw Thanks to its integrated refrigeration unit, the Lutetia Type 5 with refrigeration group offers optimal temperature control throughout the production cycles. As a result, it minimizes quality variations and improves the consistency of finished products. Additionally, it promotes better absorption of marinades and additives, directly optimizing material yield. Its regular operation also stabilizes production rates, helping to streamline the overall workflow of the processing line. Furthermore, this tumbler is easily integrated into demanding industrial environments. It can be used upstream of cooking, packaging, or further processing stages, making it a key component in continuous and structured production systems. When supplied in a configuration reconditioned by Europ’Équipement, it represents a cost-controlled investment without compromising on reliability. Finally, the Lutetia Type 5 Double Jacketed Tumbler offers an excellent balance of technical performance and operating costs, enabling producers to boost productivity while safeguarding final product quality. It is thus designed for operations focused on consistency, profitability, and long-term equipment durability. Technical Specifications – Lutetia Type 5 Tumbler - Maximum capacity: 4,000 kg - Weight: 3,000 kg - Voltage: 400 V - Frequency: 50 Hz - Power: 8.2 kW - Air pressure: 5 bar - Liquid nitrogen pressure: 5 bar - Glycol water pressure: 2 to 3 bar Technical Specifications – Refrigeration Unit - Type: HAE 051 - Year: 2012 - Weight: 260 kg - Voltage: 400 V - Frequency: 50 Hz - Power: 7.7 kW GXHBXS0D

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg Kljdpfx Ajt Hw Iieafjw

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Ksdpfx Aaevvkipofelw

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/4" inch -Price: per piece -Quantity: 9 available Kodpfxeb A Sdgj Aafelw -Weight: 0.5 kg

Condition: good (used), Roller chain, drive chain Kjdpfx Aeb A St Isafslw -various lengths 5 m 10 m -16B-1 roller chain -1-way 1" x 17.02 mm -Price: 28 euros/m

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, directional control valve -Manufacturer: Festo, solenoid valve, original packaging -Type: MVH-5-1/4 B -Operating pressure: 2-10 bar -Number: 2 solenoid valves available -Price: per piece -Dimensions: 160/60/H35 mm Klodpfxsb A Tbxs Aafew -Weight: 0.4 kg/piece

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- Ksdpfoivqm Ejx Aafelw -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min -Individual components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg

Condition: used, Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve -Manufacturer: Festo, pneumatic valve orig -Type: VL-5/3-G-1/4-B Mat. no. 14298 -Working pressure: 0.9 - 10 bar -Number: 2x valve available Kjdpeii Sf Asfx Aafolw -Price per piece -Dimensions cardboard: 135/30/H50 mm -Weight: 0.4 kg/pc.

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: JMVH-5-1/4-B -Solenoid valve -PN: 2-10 bar Kedpfx Asb A H Ewoafelw -Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Condition: excellent (used), Roller chain, drive chain -Length per package: 5 m -reinforced 16B-1 roller chain -1-fold 1" x 17.02 -Number: 10 packages available -Price: 28 euros/m Kledeb A Niujpfx Aafjw

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve Klodpfxob A S Has Aafow -Solenoid valve -PN 3-10 bar Price: per piece -Number: 7 available -Weight: 0.8 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump Kjdsb A Hciepfx Aafolw -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Condition: good (used), Year of construction: 2006, Pallet racking system, Jungheinrich, frame height approx. 8m, 500kg/pallet location, approx. 4,632 locations – used: Price ex-location: €49,500 (net), disassembled, packaged and loaded! Price for larger quantities: upon request! Hall 4 Manufacturer: Jungheinrich Type: B Year of manufacture: 2006 Number of frames: approx. 204 Upright profile: B13 Frame depth: approx. 1.10m Frame height: approx. 8.25m Frame width: approx. 8cm Beams: Length: 3.60m = approx. 1,908 Load capacity per level: 2,000kg = 500kg per pallet Bay load: 8,000kg at max. bay height: 2m In the event of complete purchase, including existing end-of-aisle protection/side protection, spacers, etc. Whether the grid decking shown is included needs to be clarified. Condition: good Kjdpfxezd Tzyj Aafjlw Available: from approx. September 2026 Location: Hamburg

Condition: excellent (used), Here, we offer you an ABB industrial robot. Specification: IRB 140 M2000 TPU 2 Panel Weight: 98 kg Max. reach: 810 mm Payload: 6 kg Klsdpfszditajx Aafow Type: IRB 140 M2000 Scope of supply: Robot, control unit, cables (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1970, Cutting range round/square: 190/190 x 190 mm Cutting range at 45° mitre round/rectangular: 140/190 x 140 mm Ksdsyvfp Iepfx Aafjlw Saw blade dimensions: 400 x 32 x 1.5 mm 1 stroke speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Required space: 1200 x 600 x 980 mm