Barloader

FMB Turbo 5-42 / 3200 B

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics Lsdpfx Alex Hn D Reyeah The machine can be viewed under power by appointment.

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Lasdpoh In Thjfx Alyjh Reconstruction- 2022

Condition: used, Year of construction: 2016, operating hours: 3,410 h, power: 190 kW (258.33 HP), next inspection (TÜV): 10/2028, Equipment: air conditioning, all wheel drive, Internal vehicle number: FG50320 Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Ljdpfoytlldox Alyeah Never registered. Financing example: * Internal number: Tractor * Purchase price: 72,000.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 1,100.02 € Residual value: 14,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Bar feeder LNS Laedpfxjr Iygij Alyeh

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,497 h, construction height: 3,270 mm, power: 209 kW (284.16 HP), empty load weight: 9,450 kg, total length: 5,274 mm, construction width: 2,620 mm, Tractor Speed category: 50 Technical condition: good Lsdpfx Aey U A H Nslyeah Battery condition: good

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm Laedpfsvfm I Hsx Alysh - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis! Laedpfx Aexx A Ewjlyeh

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Laedpfxow Nqu As Alysh Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: good (used), Parts shown by hand not come. Ledpfowb Eptjx Alyjah Technical details shown on picture. Tools in wooden box will come with machine.

Condition: excellent (used), Year of construction: 2025, operating hours: 4,077 h, functionality: fully functional, machine/vehicle number: 10511079, turning length: 550 mm, turning diameter: 160 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 140 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, spindle motor power: 32,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, total height: 2,490 mm, total length: 6,910 mm, total width: 2,092 mm, workpiece weight (max.): 4 kg, type of input current: three-phase, torque: 170 Nm, overall weight: 9,000 kg, bar passage: 65 mm, chuck outer diameter: 160 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC turning machine, manufactured in 2025, from our own machine stock. The machine was delivered and put into operation in 2025 and is in very good, like-new condition. The C200 features extensive equipment with a main and counter spindle, three tool turrets with powered tools, and Y-axes, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2025 - Machine No.: 10511079 - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool turrets - 14 stations per tool turret - Powered tools - Tool speed: max. 8,000 rpm - Y-axes on the tool turrets Ledjz Hmq Djpfx Alyoah - C-axis on main and counter spindle - Tool monitoring and tool management - Coolant high-pressure supply - Coolant/filter system - Chip conveyor - Workpiece removal / portal extraction device - Interface for bar loader magazine UNIMAG4 - Electronic spindle for spindles and drive power - CE conformity - Rated power: 54 kW - Connection power: 65 kVA - Connection: 400 V / 50 Hz Current operating hours according to the machine control: - On time: approx. 4,077 h - Hydraulics: approx. 3,863 h - Spindle / drive running times according to the operating hour counter: S1 approx. 146 h / S2 approx. 1,396 h / S3 approx. 317 h / S4 approx. 1,846 h / S5 approx. 2,224 h The machine is currently located in our factory and can be inspected and demonstrated under power after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed equipment list if you are seriously interested.