Used Teupen Leo 36 for sale (5,002)

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Knodpfx Aporfclqodob Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, total width: 799 mm, total length: 1,857 mm, total height: 1,144 mm, overall weight: 212 kg, Machine function and use The FULLMATIC 36 varnishing machine is used for full-scale varnishing of paper sheets. It is equipped with a table for manual feeding the sheets of paper through varnishing module and vacuum conveyor of varnished sheets. On the end of machine is located fixed unloading table. Simple controls of machine allows to continuous regulation of varnishing speed. Varnished sheet of paper is after hardening of varnish using UV radiator fed on unloading table. TECHNICAL PARAMETERS Input and output material Specification of paper: Max. paper format: 360 x 720 mm Ksdpfxozzk R To Apdenb Min. paper format= Manual Feeding: 150 x 200 mm Min. paper format= Automatic Feeder B3: 200 x 340 mm Paper weight: 115-350 g/m2 Specification of varnish: Types of usable varnishes: UV viscosity 30-65s (DIN 4mm flow cup viscosimeter) Application quantity 4-15 g/m2 Machine parameters Floor area: 0,8 x 1,9 m Output parameters Power - Manual sheets loading: 5-20 m/min - Automatic sheets Feeder B3: 5-15 m/min - varnishing speed=UV varnish: 5-20 m/min - varnishing speed=Water varnish: 5-8 m/min Varnish temperature: min 20°C The maximum varnishing speed is dependent on substrate and varnish specifications, ambient temperature, UV lamp power and varnish curing time. Electrical circuit Power consumption 5,5 kVA Machine voltage (basic variant): EU 3xNPE 400/230V 50Hz Control voltage of machine: 24 VDC Rated current: 10 A Recommended value of protection: C 16 A Lead-in cable: 5G 2,5mm² Cu , 5 m Pneumatic circut Pressure pneumatic circuit: 0,6 MPa; Max. 81 l/min (50 l/min) Recommended connection: Polyurethan (polyamide) tube ø8 mm Pneumatic circuit of the feeder: over-pressure +0,6 Bar Control system The control unit for operating and controlling the machine is developed in Komfi Operation conditions The machine is intended for smooth run under temperature conditions ranging from 15 C to 40 C (59°F to 104°F). The acceptable relative air humidity level is from 20  to 80 , non-condensing relative humidity. The machine allocation should not be higher than 1000 m above the sea level. It is not allowed to place the machine into explosive or dusty environment. Working mode The machine is intended for average monthly capacity according to technical specification.

Condition: excellent (used), Year of construction: 2006, LWB STEINL VCRS-T 300/36 T / Machine like new Year of construction: 2006 Injection unit: Metering volume: 36 ccm Clamping unit : clamping force: 30 t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Knodpfxozy H N No Apdsb Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: new, functionality: fully functional, machine/vehicle number: G36W05, overall weight: 39 kg, operating pressure: 248 bar, compressed air connection: 7 bar, 36:1-Mercury Pump: - Wall-mounted - Includes suction hose, material filter - Permissible material operating pressure: 248 bar - Max. material flow rate: 6 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Mercury pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Notes on the sale: Sale exclusively to business customers. No sale to private customers. Sale and delivery exclusively within the EU – no sale to third countries. Kjdjzwb Nropfx Apdjnb Delivery conditions and shipping costs will be determined individually based on effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please feel free to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical range available. We will be happy to check if we can offer you a suitable alternative.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 422250708034, Punching force: 500 kN Stroke: 32 mm Adjustable stroke: 10 - 32 mm Stroke rate: 35 /min Standard punching tool: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching tool: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Kodpfoz Dit Nsx Apdsnb Hydraulic drive: 380 V, 4 kW Weight: 1530 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Ksdstnf Iyspfx Apdenb Please contact us for more information about this machine.

Condition: like new (used), functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser power: 4,000 W, input voltage: 220 V, Equipment: CE marking, Manufacturer: FANUC Corporation Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Manufacture date: June 2016 Power supply: 200 V / 220 V Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Secondary voltage transformer: 200 V Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours. Ksdez Dk U Uspfx Apdjnb

Condition: like new (used), Year of construction: 2015, operating hours: 18,000 h, machine/vehicle number: IntNr231671, CNC Swiss-type lathe STAR SR32JN, new, manufactured in 2015 Knsdpfx Ajz Dwubopdeb Control system, manufacturer: Fanuc, series 32i-B, 7 axes (X/Z/Y/C1/X1/Z1/C2), Bar diameter max. 32 mm, Turning length max. 80 mm, Main spindle, speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle diameter max. 32 mm, Counter spindle speed max. 7,000 rpm, C-axis, Tool holder for a total of 23 tools (linear tool holder, front tool holder, rear machining), Coolant pump with increased flow rate Parts conveyor belt, Mayfran chip conveyor, Bar feeder magazine FMB turbo 3-36/3200 / A / accessories for short-turning The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 3200 A Knedpfx Apszzd Daedeb Previously used on a STAR SV-32 (year of manufacture 2013).

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, Manufacturer: MAZAK Model: VTC-820/20 HD Year: 2017 Table size: 2500 x 820 mm X-axis travel: 2000 mm Y-axis travel: 820 mm Z-axis travel: 860 mm Control unit: Smooth G Spindle connection: Din-69871 Tool magazine capacity (automatic tool changer): 36 Chip conveyor: Yes, belt type High-pressure system through the spindle: 20 bar Kodez Dt E Njpfx Apdsnb Spindle power (milling): 30 Kw Spindle speed (milling): 10,000 rpm Renishaw system: Yes, complete Automatic tool presetting: Yes, complete

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) Knjdpfjzq Ez Sex Apdsb • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the fence

Condition: excellent (used), Year of construction: 2006, 513 USED KEMPER MINI QUADRO ROUND bun divider-rounder. Line for rolls, ciabatta, and bread. Production: - square and elongated buns - round buns - stamping/marking - 4 rounding drums - moistening station - seeding station TECHNICAL DATA: - year of production: 2006 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Kjdpfxjzugm Do Apdjnb

Condition: excellent (used), Year of construction: 2014, 507 USED Fritsch FT-350/700-R dough cutting table. Knodszufhtepfx Apdjb EXTERNAL DIMENSIONS (in cm): - W: 89 - L: 362 - H: 100 - working width: 62 TECHNICAL DATA: - year of production: 2014 - power: 0,12 kW - power supply: 3×400V + N + PE, 50Hz - weight: 300 kg - belt speed: 2.9 m/min EQUIPMENT: - interchangeable cutting rollers The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Knsdpsubztksfx Apdsb Year of manufacture: 2001 on plate EDIGRAPH S.A. Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300 Knedpfx Ajxup Iqspdeb

Condition: used, For sale: a demountable warehouse with loading docks of approximately 234 m², located in Dordrecht. A practical and versatile commercial space that is ideally suited for transport, distribution, storage, or expansion of your current business activities. 🔧 Demountable & flexible The building is constructed as a demountable steel structure, offering an interesting solution for entrepreneurs looking for a flexible commercial space. ⚠️ Please note: the sale only includes the demountable commercial building. No land or plot is included. 📐 Dimensions • Length: 36 meters • Width: 6.5 meters • Area: approx. 234 m² • Ridge height: 4.30 meters • Eave height: 4.00 meters 🚛 Equipped with excellent loading and unloading facilities • Steel structure • 8 roller shutter doors of 3 x 3 meters • 8 loading bays / loading docks • Loading docks equipped with flaps Knedpezx Sd Nsfx Apdjb • Impact protection • Shock absorbers 💼 Ideal for ✔️ Transport companies ✔️ Logistics & distribution ✔️ Storage ✔️ Entrepreneurs looking for extra commercial space ✔️ Expansion of existing business activities Practical, spacious, and immediately ready for use. With 8 loading docks and 8 roller shutter doors, this building offers ample opportunities for companies where efficient loading and unloading is a priority. 📍 Dordrecht Interested? Contact us for more information or to arrange a viewing. 📩 Send a non-binding message for more information!

Condition: good (used), Year: 2014 Size max 360 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3697 Description: - air pump - blower - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - 10 Stream feeders 3741 - 3 Bundle clamp: Müller Martini Bundle clamps - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book Block feeder base - Transfer into the binder Perfect binder Müller Martini Corona C15 S/36 (18") Year: 2014 Description: - Book Data Center BDC - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable Knodpfx Apezbux Nedob - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: Robatech MOD - Stream cover feeder - Scoring station - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 70 meters - Escape delivery Three knife trimmer Müller Martini 3675 Orbit Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini 3632 CB 18 Description: - Compensating stacker - Delivery to the left and right Pile tacking device Müller Martini 457 Option: - 2 Card gluer

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ALUP ALLEGRO36 screw compressor, machine with frequency inverter, after service. Technical data: capacity: 6.23 m3/min; engine: 37 kW; maximum pressure: 13 bar; year: 2015; operating hours: 5181 h; compressor in fully working condition, with warranty. Net price: 21,500 PLN Gross price: 26,445 PLN Knodpfozp Hm Hjx Apdeb Link to the video is provided below.

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €64,000 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm Knjdpfx Aozzdyzopdeb • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L Knedpfez Diq Ujx Apdob DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: used, Year of construction: 2007, operating hours: 4,975 h, 2007 | Haulotte HA12PX | Used Articulated Boom Lift | 4975 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 46 inspection points 36 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ Kodez Dx S Uopfx Apdonb 📌 Inspector's Comment: The boom lift is in good overall condition and offers a working height of 12.4 m. The wheels will need to be replaced. The body shows signs of impacts, scratches, and oxidation. White smoke is visible from the exhaust at idle, while black smoke appears on startup. The engine does not start immediately. The presence of hydraulic oil inside the chassis, near the turret, suggests a hydraulic leak. The guardrail of the basket has undergone significant repairs and shows multiple deformations. The closures of the hoods are not all functional. The fiberglass of the engine hood and that of the hydraulic distribution block hood are damaged, and the fastening mechanism is deformed. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41348 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering this used Duplo brochure maker, model 3500, for sale. Knsdpfx Apozx Ah Sodjb It consists of the following Duplo components: DSF-2000 Serial number: 150300313 Year of manufacture: 2015 Duplo DBM-350T Serial number: 100300564 Year of manufacture: 2010 The machine was serviced last year by Ammerer. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, 531 USED FORTUNA Primus roll line. Stamping/Marking (4 marks): - round (plain) Ksdpfxsz Dbivs Apdjnb - Kaiser - daisy - cross - Portuguese The line includes tray-loading system. EXTERNAL DIMENSIONS (in cm): - W: approx. 150 - L: 460 - H: 300 TECHNICAL DATA: - year of production (divider-rounder): 2017 - year of production (proofer): 2006 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 9,337 h, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 31i Model A, number of axes: 9, This 9-axis TSUGAMI HS207 CNC Swiss-type sliding head lathe was manufactured in 2011. It features a maximum bar diameter of 20 mm and includes a Fanuc 31i Model A CNC control. The machine is equipped with a simultaneous B-axis, Y-axis for sub-spindle tooling, and comes with an FMB 3-36 bar feeder. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS207 machine we have for sale. Contact us for further details. • Simultaneous B-axis • Y-axis for sub-spindle tooling • Max. bar diameter: 20 mm • Connection/preparation for mist extraction system • Low operating hours Additional equipment • FMB 3-36 bar feeder • Chip conveyor Knedpfxoz D Hnkj Apdsb • Parts conveyor • High-pressure oil pump • Fire suppression system Technical Specification Counter Spindle No

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 415514, Title: Potain Igo 36 Quick-Erection Crane – Good Condition (no current inspection) We are selling a Potain Igo 36 quick-erection crane due to a fleet change. The crane is in good, functional condition with the usual, age-related signs of wear. It has been used regularly and well maintained. Note: The DGUV inspection (UVV) as well as a TÜV inspection for a possible undercarriage are currently expired and must be renewed by the buyer. Technical data: • Max. lifting capacity: 4,000 kg (up to 11.0 m outreach) • Max. outreach: 32.0 m (lifting capacity at the jib tip: 1,000 kg) • Hook height: 22.0 m (horizontal jib position) • Jib inclination: Up to 30° possible • Slewing radius: 2.05 m • Drive: Frequency-controlled drives • Power connection: 400 V Condition & Scope of supply: • Overall condition: Good, immediately ready for operation (after acceptance). • Inspections: No current DGUV / TÜV inspection. • Control: Wireless remote control and cable remote control available. • Ballast: Complete counterweight is included in the scope of supply. Sale and handling: • Location: Construction site in Karlsruhe • Inspection: An inspection is possible after prior appointment. Kjdpfjzy U Aksx Apdjnb • Handover: The sale is made at the location in its current condition as seen, with exclusion of warranty (B2B). Dismantling, loading and transport are to be organized by the buyer.