Used Tornomat 2 for sale (77,733)

Condition: used, Year of construction: 1982, Multi-spindle lathe Brand: TORNOMAT Bjdeyll Atopfx Aktslp Model 2 C

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, controller model: RÖDERS RMS 6 Version 4.20, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Control system: RÖDERS RMS 6 Version 4.20 Travel range, X-axis: 760 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 300 mm Table dimensions: 860 x 550 mm Max. workpiece weight: 800 kg Feed rate: 0 to 30,000 mm/min Positioning accuracy: 0.005 mm Spindle speed: 42,000 RPM MACHINE DETAILS Control system: RÖDERS RMS 6 Version 4.20 Dimensions & Weight Dimensions (L x W x H): 5,000 x 3,000 x 2,700 mm Blsdez Iludepfx Aktsp Weight: 7,000 kg EQUIPMENT 2 EROWA clamping systems Additional suitable accessories Cooling system Extraction system Work bench with fixtures 3D measuring probe External reference: Alesco - Lot 62

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg Blodpfxjz Il Ikj Aktop External Reference: Steinbach & Holler - Lot 62

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Blodpfx Asyrm E Aektsp Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Bodovbdyfopfx Aktelp Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! Blsdpo Af Hd Uofx Aktop The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: good (used), functionality: fully functional, Universal milling machine Mikron WF 2!!! Technical data: >> Fixed angular table >> Speed: 12 speeds from 50 - 2240 rpm >> Feed rate in 3 axes from 8 – 400 mm/min >> Rapid traverse in 3 axes 1400 mm/min >> Travels X/Y/Z: 420/250/345 mm >> Vertical and horizontal quill – SK40 >> Collet system S20x2 >> Weight approx. 850 kg >> Central lubrication Bods Ahq Hzspfx Aktslp About the machine: A Mikron WF 2 universal milling machine in working condition is offered for sale. What makes this machine special are its travel distances, which are very large in relation to the machine's size: Z = 345 mm, X = 420 mm, and Y = 250 mm. Take advantage of the opportunity to inspect and test this machine on site while it is powered up.

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Blsdpfx Akozg Nt Dstjp Manufacturer: Bosch Type: UL-S 14000 Year of manufacture: 2014 If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2014, Sanding belt dimensions: 150 x 2000 mm Contact wheel width/diameter: 200/200 mm Sanding belt speed: 14.5/29 m/s Drive motor: 380 V, 2.1/2.8 kW Bodpfx Akj Ahp Hustslp Space requirement: 1070 x 530 x 1130 mm Weight: 110 kg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 150 kg, overall weight: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe, between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Maximum workpiece dimensions: 840 × 460 × 350 mm Maximum workpiece weight: 150 kg Work table dimensions: 600 × 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Bsdpfx Asz Il Eioktolp Rotation speed C-axis: 300 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Weight: 2,000 kg External Reference: Schönichen - Lot 12

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Bedpfx Akezhcizjtslp Year 1979 x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. Blodpfs Aguv Eex Aktop The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Colly hydraulic plate shear, type GTS 2 4006 working width 4050 mm maximum sheet thickness 6 mm motorized back gauge Bledpfs Af Ivxex Aktsp Elgo digital adjustment for the back gauge

Condition: good (used), functionality: fully functional, Year of construction: 1998, 1 unit, used. Shredder mill including dust extraction and soundproof housing. Manufacturer: HERBOLD Year of manufacture: 1998 Type: SML35/42 S3/2-2 Bodpfx Ao Ahd Ubjktjlp Infeed size: 410 mm x 350 mm Rotor diameter: 420 mm Motor power: 18.5 kW

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: Bodpfs Agwvmex Aktolp >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM Blsdpfx Ako Agn Rxotep >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Blodpe Afznujfx Aktop Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: good (used), Year of construction: 1990, Ref. -No.: 10544 Manufacturer: DECKEL Type: KF 2 Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Bsdpfxe Ahmu Es Aktelp Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device - Roller engraving devices - Machine vice hydraulic clamps - Auxiliary clamping table - Dividing head - Tool cabinet - Clamping claws - template bars - articulated light The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1001058, power: 4 kW (5.44 HP), type of input current: three-phase, cutting height (max.): 800 mm, total height: 800 mm, overall weight: 2,960 kg, coolant pump power: 120 W, cutting range round steel at 45°: 440 mm, cutting range round steel at 90°: 800 mm, cutting range square steel at 45°: 440 mm, cutting range square steel at 90°: 800 mm, height adjustment type: hydraulic, roll diameter: 800 mm, saw band length: 820 mm, saw blade length: 8,200 mm, Excellent working condition. Last 2 years doesn’t work Blsdexwcd Dspfx Aktep

Condition: used, Year of construction: 2012, machine/vehicle number: LC678, Used OLMOS compact eco2 linear capper labeller - glass and PET Technical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable transfer through the operating stations. Electrical supply is specified as 380V AC.Production Line Integration CapabilitiesThis used bottling line component is suitable for integration with upstream filling, rinsing or bottle conveying equipment and downstream inspection, secondary packaging or palletizing systems. The machine handles PET and Glass bottles from 0.5L to 5.0L, providing format flexibility for beverage production and other bottled products. Its combined labeling and capping arrangement can help simplify line layout by bringing two key packaging operations together in one in-line unit.Machine type/categoryManufacturer/modelYearLabeling MachineOlmos COMPACT 800 22012Capping MachineOlmos COMPACT 800 22012Machine Condition & Maintenance HistoryThe machine is described as being in perfect working condition. This operational condition makes it relevant for second hand bottling equipment projects where a combined labeling and capping solution is required for PET or Glass bottle formats.Operational Performance & VersatilityThe COMPACT 800 2 combines labeling and capping in line for bottles ranging from small 0.5L formats through to 5.0L containers. This versatility supports production lines that require different bottle capacities while maintaining an integrated industrial packaging flow. PET and Glass compatibility makes the machine applicable to a range of beverage production layouts.Installation Requirements & Site PreparationInstallation should provide an in-line conveyor interface matched to the bottle formats, container material and production flow of the existing packaging machinery. The electrical connection must be prepared... Bedpo Ady Dfofx Aktolp

Condition: used, Year of construction: 2012, machine/vehicle number: FA62, Used OCME VEGA HT 1002 shrink wrapperTechnical Specifications & Performance DataThis high-speed Shrink Wrapper is engineered for continuous industrial packaging on beverage production lines. Manufactured by Ocme, model HT 100/2, it delivers reliable bundling with film-only configurations across PET, glass, and aluminum containers. Designed for second hand and used bottling line integration, it supports demanding production schedules while maintaining consistent packaging quality.Manufacturer: OcmeModel: HT 100/2Year: 2012Maximum speed: up to 72,000 bottles/hour (line throughput)Container materials: PET, Glass, Aluminum (cans)Current bottle format: 0.33LMaximum container height: 250 mmMachine pitch: 380 mmPackage type: Film only (no tray)Number of lanes: 2Maximum film reel diameter: 500 mmNumber of film reels: 2Operator side: LeftWorking height: 1250 mmElectrical supply: 400 VInstalled power: 210 kWCompressed air: 6 barModel code: HT 100/2Advanced Automation & Control SystemsThe machine features robust automation for high-speed industrial packaging. A Siemens PLC and Siemens HMI provide intuitive control, diagnostics, and recipe handling for quick format adjustments. Automated film handling with dual-reel configuration ensures continuous operation and reduced changeover downtime. The two-lane infeed optimizes throughput and balances product flow for stable shrink-wrapping performance.Siemens PLC for reliable process controlSiemens HMI for operator interface and recipe managementQuick format setup for 0.33L and other compatible sizesDual film reel system for uninterrupted productionOperator-side ergonomics on the left for easy accessProduction Line Integration CapabilitiesEngineered to integrate seamlessly within a used bottling line or new industrial packaging layout, this Shrink Wrapper connects upstream with fillers and labeling machines and downstream with case handling, palletizers, or warehouse systems. It handles PET, glass, and aluminum containers in beverage production and supports flexible multi-format bundling with film-only packages.Inline operation with conveyors and accumulation systemsFilm-only bundle configurations for lightweight secondary packagingSuitable for water, CSD, beer, wine, milk, oil, and spirits applicationsAdaptable to multiple bottle sizes around 0.33L and beyond (within machine limits)Machine Condition & Maintenance HistoryThe unit has been overhauled and is guaranteed, ready for immediate operation. It is offered with compatible spare parts to support commissioning and initial operation phases, making it a strong second hand choice for high-speed beverage a... Bledpfx Ako Adt Dlstsp

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, TAWI arm lifting capacity: 80 kg, length: 300 cm Vacuum suction cup, lifting capacity: 80 kg CE marking Foot length: 380 cm, lifting capacity: 80 kg, AHS Polska Lifting mechanism drive: vacuum Rotation angle: 240 degrees Weight: 180 kg Year of manufacture: 2016 Blsdpfx Aks Ahg Izjtjp

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, TAWI arm lifting capacity: 80 kg, length: 300 cm Vacuum suction cup, lifting capacity: 80 kg CE marking Foot length: 380 cm, lifting capacity: 80 kg, AHS Polska Bedpfx Aj Ahg Nqoktjlp Lifting mechanism drive: vacuum Rotation angle: 240 degrees Weight: 180 kg Year of manufacture: 2016

Condition: ready for operation (used), Heidenhain / Grundig VAR56K IN31884901 control board AES 1 / VAR56B IN0853720 AES 2 0.883.149-0, serial number 2019052, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bljdpfx Ao Ahvg Nsktsp

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Bodpfx Aozbvhfoktjlp Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.