Used Tmg Temperature Sensor for sale (11,309)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Kdodpfx Afjzlktpj Het Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Kodpsxc Eitefx Af Hsdt Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, warranty duration: 12 months, total height: 3,600 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available—please feel free to contact us for details. Leitz | PMM 12106 with PH10 and SP25 Scanning System Refurbished coordinate measuring machine featuring the latest Renishaw technology Modernized in 2021 Measuring range XYZ: 1200 x 1000 x 600 mm Measurement uncertainty MPE (E0): 1.2 + L/400 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 motorized indexing head with SP25-2 scanning system, including FCR25-L6 (6 port) probe changer - MODUS metrology software, latest version, with CAD import (STEP format), including 1-year software maintenance - PC system with Windows 10 and two new 27" TFT monitors, height-adjustable desk included - Control cabinet with state-of-the-art safety features - M6 base plate We are happy to customize the configuration to meet your requirements. Machine sales and service only available within Germany! Optional service packages upon request: Free curbside delivery | Commissioning | Inspection | Accuracy certification according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Additional options and configurations available upon request Kedpfx Afovxh Dio Hodt

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Kedpezt Sb Djfx Af Hjdt Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 3,50,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 2,04,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Kdodpfsznbqqox Af Hst

Condition: new, Year of construction: 2015, operating hours: 3,000 h, Operating hours: 3000. Water tank: 800 liters. Equipped with: 160 cm dispensing unit, lateral displacement 60 cm to the right, prepared for GPS integration. Optional: rear-view camera, 120 cm dispensing unit, 500 or 1,150-liter water tank, surface water pump (incl. hose and basket), high-capacity side nozzles, bracket for standpipe for hydrants, mounted on equipment carrier, e.g. Holder, Wille, Multihog, hand lance with 15 m water hose on the drum. Features: capacity per day: 17,000-35,000 m²/day*, operating speed at 100% weed coverage (min.): 0.5 km/h, average treatment speed: 3-5 km/h, operating speed at low weed coverage: min. 5 km/h, water consumption during weed control (min.): 34 l/min, drive via the hydraulic system of the carrier vehicle (min. 60 l/min at 180 bar), 2 x high-tech burners 110 kW with min. 92% efficiency according to EN 303-2, burner emission class: > EURO 6, automatic water softening system with 5 l canister and level monitoring, control unit with touchscreen for controlling and monitoring the system in the carrier vehicle, data storage for 5 days and daily performance readout via USB stick (Excel format), preparation for GPS integration, water pressure during weed control: 0.2 bar, water temperature at the plant during weed control: 98-99.6°C, active temperature control (software-controlled - no bypass control) for a constant water temperature of 99.6°C (+/- 0.6°C), burner drive: diesel or Aspen D biodiesel, capacity of the burner tank: 105 l, capacity of the water tank: 800 l, standpipe bracket, reversing camera, sensor-based dispensing unit with infrared sensors, application system: 2 rows with 20 valves in 4 independent sections, dispensing unit: working width 160 cm, lateral working nozzles (2 left, 2 right), plus 2 high-performance nozzles left and right, with 60 cm lateral displacement to the right, stainless steel hose reel with 15 meter hose and 20 cm hand lance, adapter and frame with support feet for mounting the unit on the carrier vehicle, water tank (plastic) 800 liters with C-pipe connection and level indicator, dry-run protection, water filter, standard color: RAL 9006, weight of the heating unit (net): 560 kg (without water and fuel), machine dimensions: (L x W x H) 3,500 x 1,750 x 1,600 mm, weight of the dispensing unit: 340 kg, storage location: null. Ksdpfsu Hf A Ajx Af Hedt

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere Kedpfx Afezr I R Ej Hedt HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 1,82,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 1,16,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Kdjdpfx Asznlhmsf Hst

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Kdodpfezm Hahex Af Hst Manufacturer: em machines Model: Liquid Mate Sense Premium Year of manufacture: 2024 Condition: good Category ID: 661 Type: Monitoring and control of cutting fluids The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, The filter body is original PENTAS, Czech/EU production. The automation system has been newly built and has never been used. Main data: - Manufacturer: PENTAS Horice a.s. (CZ-EU) - Model / type: AO-9N - Type: vertical pressure leaf filter Kjdpotxc Hpsfx Af Hedt - Filtration area: approx. 10 m² - Filter body: stainless steel - Vessel volume: 830 l - Max. working pressure: 0.5 MPa - Max. working temperature: 40 °C - Weight: approx. 760 kg - Year of filter vessel: 1999 - Automation: new and unused - Control: PLC control cabinet - Valves: pneumatic valves - Includes piping, fittings, sensors and automation system - Location: Slovakia, EU Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter vessel is used, but the automation system is completely new and unused. The unit is designed for automatic operation with pneumatic valves, sensors and PLC control. Fully functional according to seller information. Sold as shown in the photos. Loading possible. Worldwide shipping on request. 7. Nemački dodatak Zu verkaufen: PENTAS AO-9N Edelstahl-Druckblattfilter mit ca. 10 m² Filterfläche. Der Filterbehälter ist original PENTAS, tschechische/EU-Produktion. Die Automatisierung wurde neu aufgebaut und ist unbenutzt. Technische Daten: - Hersteller: PENTAS Horice a.s. (CZ-EU) - Modell / Typ: AO-9N - Vertikaler Druckblattfilter - Filterfläche: ca. 10 m² - Edelstahl-Filtergehäuse - Behältervolumen: 830 l - Max. Betriebsdruck: 0,5 MPa - Max. Betriebstemperatur: 40 °C - Gewicht: ca. 760 kg - Baujahr Filterbehälter: 1999 - Neue, unbenutzte Automatisierung - PLC-Schaltschrank - Pneumatische Ventile - Rohrleitungen, Armaturen, Sensoren und Steuerung inklusive - Standort: Slowakei, EU Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Der Filterbehälter ist gebraucht, die Automatisierung ist neu und unbenutzt. Voll funktionsfähig laut Verkäuferangabe. Verkauf wie auf den Fotos. Verladung möglich. Versand auf Anfrage.

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. Kedpfxszza Axe Af Hsdt - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Kdodpfsy Ez Ersx Af Hst Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! Kdedozx S E Hjpfx Af Hot TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1979, operating hours: 216 h, Twin-screw extruder, parallel Kodpfxeyhcc As Af Hedt Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. Kdedpfx Afoz Ag Ude Hot An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm Kdedpfx Aey S S Azof Hjt The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Kodpfx Ajzx S Emef Hodt Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E21MI19102784225, This is a combination oven/steamer, model CMP 201 in electric version, from the premium manufacturer Rational, manufactured in 2019, with only 1982 operating hours. The unit features an automatic self-cleaning program!! The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection. It will be sold with a 6-month warranty. These are current, original photos!!! The combination oven/steamer is expected to be available from week 30. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational equipment model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Kdodpfx Ajzkkg Hsf Hjt Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI19102784225 Year of manufacture: 10/2019 Condition: Used, inspected and fully functional. Further details: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to the optimal serving temperature under ideal conditions. Automatic separation of fat for clean cooking chamber air Semi-automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Kdodeznl Duspfx Af Hst Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Kjdszukkgopfx Af Hsdt Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 2,89,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 1,36,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Kedpfx Ajznll Ssf Hsdt

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine, type Crysta Apex S544 Multi-sensor cabling (analog scanning) Temperature compensation for all axes Measuring range, X-axis = 500mm Measuring range, Y-axis = 400mm Measuring range, Z-axis = 400mm Measurement uncertainty = 1.7 + 3L/1000 (µm) Mitutoyo controller UC200H Renishaw probe head PH6M Ksdpfx Aszhumfef Hedt Renishaw sensor SP25M Renishaw module SM25-1 Measuring software MCosmos-1 v.4.x PC system WIN10 and 27" monitor (new) Reference sphere / calibration sphere (new) Hardware & software upgrades available upon request Delivery & other services available upon request

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Kodpfsu A Tf Dsx Af Hodt Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Condition: used, mileage: 3,54,733 km, power: 105 kW (142.76 HP), first registration: 11/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 87 Paint code: * 9147 Paint color arctic white Interior equipment: * VF7 fabric Maturin black Equipment: Kedpfx Aeulrfasf Hjdt * A50 front axle with increased load capacity * BH2 Control code hydraulic unit variant 1 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * C910 * CB7 Stabilization level I * CL1 Steering wheel adjustable in tilt and height * D50 Full-length partition wall * E07 Hill start assist * E1D Digital radio (DAB) * E3M Mbux multimedia system with 7-inch touchscreen * E43 Trailer socket 13-pin * ED4 Non-woven battery 12 V 92 Ah * EE1 230 V socket * ES0 Jump-start contact * ES5 Instrument panel charging package * EW6 Remote Services Plus pre-installation * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F3F Passenger-optimized gearshift console * F68 Heated and electrically adjustable exterior mirrors * F910 * FF5 Storage compartment above windshield * FJ4 Storage compartment under cockpit * FKA Panel van * FM3 WET WIPER SYSTEM * GE9 6-speed manual gearbox * H15 Seat heating for front passenger * H16 Seat heating for driver * H1B Front tachograph control under headliner * H21 Heat-insulating glass all round with band filter on windscreen * HH9 Semi-automatically controlled Tempmatic air conditioning system * HI1 Climate zone 1 (cold/comfort) * IC1 C907/C910 Sprinter series * IF0 C910 VS30 Fwd series * IG4 Standard * IH6 Headunit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IS3 Wheelbase 3924 mm (BM-forming code) * IT4 3.5 tonner * J10 Speedometer km/h * J4V Pre-fitting intelligent tachograph EU * J55 Seat belt warning device for front passenger seat * J58 Seat belt warning device for driver's seat * J65 Outside temperature display * JA8 Crosswind assistant * JB7 Parking package with reversing camera * JF1 Rain sensor * JG0 Gearshift indicator * JH3 Communication module (LTE) for digital services * JI6 Starting distance maintenance interval 40,000 km * K1D Exhaust gas generation WLTP * KB8 Main tank 92 liters * KP6 Exhaust gas purification SCR Generation 3 * L Left-hand drive * L65 Load/passenger compartment ceiling light with door contact * LA2 Driving light assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in load compartment * LE1 Adaptive brake light * LX5 Europe * M48 Generator 14V/230A * MI2 OM651 DE 22 LA engine 105 kW (143 hp) * MJ8 ECO start/stop function * ML7 Efficient Power Control (EPC) * MS1 Cruise control * MT2 Emission class Euro 6D-TEMP N1 * OH3 HU Freshup 3 * Q11 Side member reinforcement * Q22 Trailer coupling ball head fixed * QB1 Vehicle pre-equipment for trailer load up to 2000 kg * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Continental tires (10) * RM0 All-season tires * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RZ2 Wheel manufacturer Magnetto Wheels * S22 Armrest for driver's seat, ISO-fix (child seat fastening system) * S23 Two-seater passenger seat * S94 GZE power supply * SA5 Airbag driver * SA6 Airbag front passenger * SB1 Driver's seat comfort * SE5 Lumbar support for driver's seat * SK2 Seat occupancy detection driver's seat * T16 Sliding door right * T77 Handle for access to load compartment sliding door on partition * T86 Access handle on rear corner pillar

Condition: used, functionality: fully functional, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Manufacturer: SICK Type: AT20E-PM111 (AX20 series) Category: Array sensor / Edge detector Function: Edge detection, measurement of diameters/widths, reflector-capable Sensing distance / Measuring range: 25 mm / Measuring range 20 mm Output: PNP / Analog (4–20 mA) depending on the variant Protection class: IP67 Temperature range: −10 … +55 °C Dimensions: compact design (see datasheet) Kodpfozh Ankex Af Hodt Weight: approx. 0.14 kg