Used Vertex Drill Bit Sharpening Machine 8-30Mm New for sale (95,319)

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31 Hnodpfjx A Tk Ssx Anvon

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m Hedpfx Anszcqyfovenn - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: used, machine/vehicle number: 008601, Max. panel width: 3200 mm Hnjdpezbrnhsfx Anvjn Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, Display unit Condition: Like new Hnsdpfeyamc Dox Anvjn Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, Display unit Condition: Like new Included in delivery: Hnedpjv Ntb Ijfx Anvon Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Hodpow Rhk Rsfx Anvonn Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Hodpfxjx A Hbko Anvjnn Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 32 mm throat 285 mm bore stroke 160 mm turning speeds 55 - 1450 U/min taper MK 3 table-size 500 x 370 mm feed 0,1-0,2-0,3 m/min total power requirement 1,6 kW weight 400 kg dimensions 1000 x 700 x 1850 mm Features: - Automatic feed - Coolant system Hnedpjzcqzcjfx Anvsn - Continuously variable speed control - Adjustable depth stop - Drill chuck

Condition: new, bore capacity in steel (diameter) 28.0 mm throat 320 mm bore stroke 150 mm morse taper 3 MK table: 500 x 350 mm turning speeds 75.0 - 3010 U/min total power requirement 1.35 / 1.70 kW weight 290 kg range L-W-H 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) Hodsxaba Aepfx Anvsnn - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change) Hnsdpszabakefx Anven

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Brema EKO 2.2 is the new compact and versatile vertical boring machine that supports the processing of different thickness and size formats within a reduced footprint. It is the ideal solution for “just in time” production also for more complex routing processing. Maximum machine customization depending on production requirements Maximum manufacturing efficiency thanks to the elimination of set-up times Wide range of processable panels Brema EKO 2.2 – CNC panel machining centre X working field: 3200 mm Hsdpfx Anownx Ivsvsnn Y working field: 1250 mm Workable panels (dimensions min. - max.) Dimension MIN (mm) MAX (mm) Length (X) 200 3200 Height (Y) 35 1250 Thickness (Z) 8 60 Max. workable panel weight: 50 kg (*) Panel Height (Y) / Length (X) ratio ≤ 0.75 for panel up to L = 320 mm (°°) Panel Height (Y) / Length (X) ratio ≤ 1.5 for panel L > 320 mm On minimum panels managed with only one gripper clamping, all types of processing can be realized — except those in the gripper interference zone. In case of processing at gripper height, piece tilting may be necessary. All operations must be verified case by case depending on: panel dimensions (especially minimum values), material type, covering, and machining requirements. Working field of the tools (dimensions min. - max., referring to tool axis) X Axis Operation MIN (mm) MAX (mm) Boring 0 3200 Routing (with electro spindle) 0 3200 (^) Grooving (with saw blade in X) 0 3200 (^) Y Axis Operation MIN (mm) MAX (mm) Boring 0 1250 Routing (with electro spindle) 0 1250 Rf Grooving (with saw blade in X) 25 1250 Z Axis Operation MIN (mm) MAX (mm) Horizontal holes 0 35° Ru (^) With grippers automatic repositioning (°) Max. dimension may be reduced depending on the panel size and gripper positioning

Condition: not inspected (used), Year of construction: 1996, bore capacity in steel (diameter) 32 mm morse taper MK 4 base plate 1700 x 700 mm feed 4 m/min weight of the machine ca. 1,5 t Hnodszb Raiopfx Anvjn dimensions of the machine ca. 1800 x x1200 x 2480 m

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 50 mm, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 1,400 rpm, rotational speed (min.): 31 rpm, total width: 800 mm, total length: 1,100 mm, total height: 2,400 mm, throat depth: 335 mm, table width: 480 mm, table length: 560 mm, overall weight: 1,270 kg, Equipment: CE marking, documentation/manual, # Column Drilling Machine MTP Z5150B – New ## Description The MTP Z5150B column drilling machine is a professional industrial machine designed for drilling, reaming, countersinking and tapping operations in steel, cast iron, aluminum, brass, bronze and other metals. Its heavy-duty cast iron construction and machine weight of 1270 kg ensure excellent rigidity, stability and machining accuracy, even when working with large-diameter tools. The machine is equipped with a mechanical gearbox offering 12 spindle speeds and automatic spindle feeds, allowing the operator to select the optimal cutting parameters for various materials and tooling applications. The tapping function and integrated coolant system further enhance productivity and versatility. With a spindle speed range from 31.5 to 1400 rpm, the MTP Z5150B is suitable for both heavy-duty drilling operations and precision machining tasks. The large T-slot worktable provides secure and convenient workpiece clamping, while the robust column design minimizes vibration during operation. The machine is CE compliant and supplied with technical documentation and an operating manual. ## Standard Equipment * Mechanical gearbox * Automatic spindle feeds * Tapping function * Integrated coolant system * Adjustable worktable * Safety guard * Emergency stop switch * Technical documentation * CE Declaration of Conformity ## Technical Specifications * Model: MTP Z5150B * Machine type: Column drilling machine * Maximum drilling capacity: 50 mm * Spindle taper: MT5 * Quill travel: 250 mm * Motor power: 3 kW * Power supply: 400 V Hnodpezcn A Djfx Anvon * Frequency: 50 Hz * Electrical phase: 3-phase * Spindle speed range: 31.5 – 1400 rpm * Number of spindle speeds: 12 * Automatic feed range: 0.056 – 1.80 mm/rev * Throat depth: 335 mm * Table size: 560 × 480 mm * Machine weight: 1270 kg * CE Marking: Yes * Documentation available: Yes * Condition: New * Year of manufacture: 2025 ## Suitable Materials The machine is designed for machining: * Structural steel * Tool steel * Cast iron * Aluminum * Brass * Bronze * Engineering plastics Recommended cutting speeds displayed on the machine help operators quickly select appropriate drilling and tapping parameters for different materials, ensuring efficient machining and extended tool life. ## Additional Information The MTP Z5150B is an excellent choice for metalworking workshops, maintenance departments, tool rooms, fabrication shops and industrial production facilities. Its powerful 3 kW motor, wide spindle speed range and tapping capability make it a versatile solution for daily machining operations. The machine is available from stock and ready for immediate dispatch. Transportation can be arranged throughout Europe upon request.

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hodpfx Anozcnnaovsnn

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Hnjdpfx Asx E Ingsnven Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 Hsdpfxsriu Eye Anvenn TYPE: RF50/1250 20 AVAILABLE PIECES

Condition: ready for operation (used), Year of construction: 1994, quill travel distance: 170 mm, throat depth: 900 mm, power: 3 kW (4.08 HP), High-speed radial drilling machine Manufacturer: HKS, Type: HKS 34 MG Year of manufacture: 1994 Technical data Manufacturer: HKS Type: 34MG Hnsdpfxjzbr Ibe Anvon Year of manufacture: 1994 Drill spindle mount: MK 4 Overhang: max. 900 mm Drilling capacity: 32/38 mm, see data sheet Drill spindle stroke: 170 mm Distance spindle – table: 300 / 750 mm Motor power: 3 kW Clamping area with T-slots: 1050 x 420 mm External dimensions W x D x H: 1400 x 2000 x 2450/2900 Weight approx.: approx. 2000 kg Equipment - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Swivel table 510 x 310 mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Hedpfx Asyyxkhsnvsnn

Condition: used, Year of construction: 2009, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, table length: 400 mm, empty load weight: 800 kg, drilling depth: 250 mm, feed length Y-axis: 300 mm, feed length Z-axis: 250 mm, feed rate X-axis: 200 m/min, Electrode diameter: between 0.3 mm and 3.0 mm. Drilling depth and speed: The maximum drilling depth can reach 300 mm, and the drilling speed ranges between 30-60 mm/minute, depending on the material quality. Fully functional, with a digital Mitutoyo measuring system. Ready for immediate use. Hodszcwz Aepfx Anvenn

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Hedpfspr Uvrjx Anvonn

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... Hnodpfx Aoxapdcsnvjn USB Interface,

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm Hnedpfx Aoy Ih Skonvsn 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: excellent (used), For sale: Professional WNT tool holder SK40 Ø12x80 capable of operation up to 25,000 rpm (balanced to G2.5). The holder comes complete with a ventilated drill – ideal for machining with internal cooling. Excellent condition, the tool has been tested and is ready for use. Top-class equipment, designed for precision machining on CNC centers. Hnjdpfx Anow Rrw Ujvon

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder Hnjdpfx Aexdh Hqsnven • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. The machine is fully functional and ready for operation. 📦 Included: Hodpfx Aey A Tqzenvenn Set of collets (various diameters – as shown in the photos) Additional grinding wheels Accessories as visible in the photos ✅ Advantages: Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.