Weiss Circular Saw Sharpening Machine

Weiss

Condition: used, WeissType: WT3-600/70/5 Weiss Temperature Test Chamber WT3-600/70/5 Water-cooled version With S!MCON / 32 control system and touch panel control unit "Touch Panel" On the "Touch Panel" control unit, all control and operating commands can be initiated by simply touching the function symbols.Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These can be used to route measuring cables and testing equipment into the test chamber. Feedthrough installed as standard: R1: 125 mm L1: 50 mmTest chamber volume: approx. 600 litersExternal dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mmExternal dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mmInternal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mmData for temperature tests:Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 KTemperature change rate (according to IEC 60068-3-5): Heating: 7.5 K/min Cooling: 7.5 K/minMaximum heat compensation: 2500 WData for operation:Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: approx. 23 A Rated power: approx. 13 kW On-site protection: 16 A time-lag fuseSound pressure level: Measured at a distance of 1 m in front / 1 m height: approx. 58 dB(A)Refrigerant: R-404A / R23Weight: approx. 620 kgFor your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.testtesttesttesttetstettetetetetetetetetetet Godpfjy Nibpox Ap Dobu

Condition: used, Weiss Weiss ShockEvent D/210/a/V1 Type of equipment: Temperature cycling shock test chamber Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps Test chamber volume: approx. 210 liters Usable test chamber width / height according to the installation plan: 700 / 500 mm Installation dimensions according to the installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments Weight: approx. 1,350 kg Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C Temperature deviation over time: ±0.3 to ±0.5 K in the steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W Maximum load on test chamber floor: 100 kg, evenly distributed Maximum number of insert baskets: 7 Maximum load per insert basket: 7.5 kg Maximum total load of the insert baskets: 50 kg Distance between the insert baskets: 50 mm Operation: WEBPanel touch display with WEBSeason® Remote control: via computer, smartphone or tablet Gbjdpfx Apez Rwk Rj Dou Interfaces: Ethernet, USB and Digital I/O Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to the nameplate Other connection options according to the manual: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class of the control cabinet and operating panel: IP23 Cooling: water-cooled Cooling water connections: supply and return, each with 1" internal thread Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure of the cooling water circuit: over 2 bar Cooling water consumption under full load at 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load at 28 °C inlet and 5 K heating: 5.8 m³/h Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C Condensate drain: hose connection Ø 8 mm Sound pressure level: approx. 63 dB(A) Permissible ambient temperature during operation: +10 to +35 °C Permissible relative humidity at the installation site: maximum 75 % Refrigerant: R449A 3.5 kg R469A 2.5 kg Shipping or forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2003, condition: used, Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible. Gbjdoz R A Rcspfx Ap Dou

Condition: used, Year of construction: 2002, Power 18.5kw Rotor 600mm Opening 100cm/100cm Gjdpfx Apez Ihw Uj Djbu Hours : 2677 380V

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Gsdpfexbgrgex Ap Dsbu Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climate Cycle Test Chamber Weiss SC 1000/+20 IU Corrosion Climate Cycle Test Chamber The test system is a combination of a climate testing chamber with variable temperature and humidity and a corrosion testing chamber with a salt spray test. In a time-lapse mode, vulnerable metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Climate operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Relative humidity: 10...98 % RH Time-dependent humidity deviation: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray with a two-nozzle system, 1.5 x 0.5 mV80 cm? h) Control: Digital measuring and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature control - Climate control - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls - Drying/ventilating the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring system tft’ (with forced humidification) Gbsdpfx Aoph U Dhjp Deu Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between the heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load: 100 kg Brine storage tank: approx. 200 l, with level monitoring, located separately to the side/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected power: 13 kW Weight: 1300 kg You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must be able to withstand different temperatures during manufacturing, transport, storage, and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Gbedsh Izh Iepfx Ap Dsu Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving systems, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1988, condition: used, For sale is an environmental simulation system / climate testing system from WEISS Umwelttechnik GmbH, type 64/80-130DU. Technical data: Manufacturer: WEISS Umwelttechnik GmbH Type: 64/80-130DU Device No.: 221/11506 Year of manufacture: 1988 Gbodpfx Aez Izwnop Deu System No.: 99663 Wiring diagram No.: 99662 Refrigerant: R404A – 0.8 kg Refrigerant: R23 – 0.8 kg Low-pressure max.: 18 bar High-pressure max.: 25 bar Operating pressure: 16 bar Electrical connection: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 1.3 kVA Rated current: 60 A Service No.: 44985 Description: Robust environmental simulation or climate testing system from WEISS Umwelttechnik for performing tests under defined climatic conditions. The system comes from an industrial setting and is particularly suitable for use in development, quality assurance, and testing technology.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Gbedoz E Rbdepfx Ap Dju Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Year of construction: 1997, condition: excellent (used), Safety workbench Manufacturer: WIBO Weiss Type: Jekt TCRJO 180/98 Gbodpfx Apohk St Aj Deu with stepped design made of stainless steel Work area: Depth: 920 mm Height: 1200 mm Width: 1800 mm Working height: 600 mm Overall dimensions: Depth: 1080 mm Height: 2100 mm Height with dust extraction: 2550 mm Width: 1800 mm