Used Waco Jonsered Ab Bandresaw Bk60 for sale (11,835)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel Lodpfx Asvn Tg Ijkfehf New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Ljdpfovwlqqex Akfohf Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Lodpfju Thhrsx Akfehf Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Ledpott Sy Rofx Akfshf Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Lhjdpjuprqwjfx Akfef Used, functional condition

Condition: ready for operation (used), Planing and re-saw line with below main equipment: 9 head planer type WACO 3000 Feeding speed 0 - 90 m/min Max planing width Min planing width Max planing height Min planing height Canali double bandsaw type ML1100 Marking equipment Lhjdpfxjxb Akls Akfef Stacker and packing machine Press for packages Grinding equipment for planer. For more data and information please see below link to youtube

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Lhodpfx Ajxqf Rmokfsf

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Lodpfsvgrh Uex Akfshf Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Ledjv T I Evopfx Akfehf Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, For sale: GEODESIGN AB AQUA BARRIER FLOOD BARRIER Aluminum pallet barrier, approximately 400 m long, Ljdpfxewhlhvj Akfjhf Sold in quantities of 100 m or more Packaged in several crates; Without film, beams, or pallets.

Condition: good (used), Year of construction: 1988, WACO HM 200 moulder with splitting unit in the end of machine. Max. working width/high : 200 x 120 mm Spindle diameter : 45 mm Max. infeed speed : 60 mtr/min Moulding heads with 6 knives Spindle configuration : 1. buttom 11 Kw 2. Top 11 Kw 3. Right 7,5 Kw 4. Left : 7,5 Kw Splitting unit : 5. Right saw 37,5 Kw Lhsdpfxsur Nk Hj Akfjf 6 Left saw 37,5 Kw Lots of extra tools, heads + sawblade boxes

Condition: used, mileage: 1,001 km, first registration: 01/2007, color: black, driver cabin: other, gearing type: other, Year of construction: 2007, Equipment: crane, Vehicle location: Bovenden, Body: Jonsered J1020-80R with high seat Dismantling from Daimler-Benz Actros 3341 K 6x4! Load diagram: 3.9m-2660kg, 5.4m-1900kg, 6.4m-1640kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lodpfx Aemnqhnjkfshf

Condition: used, mileage: 1,001 km, first registration: 01/2002, driver cabin: other, gearing type: other, Year of construction: 2002, Vehicle location: Bovenden, emergency stop, grab control, 1x hydr. extension 3,9m=2610kg, 6,4m=1610kg, 7,9m=1290kg , grapple possible at extra charge ! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhjdpfxoi Rmlbs Akfsf - .

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Ljdpfstp Thbsx Akfjhf Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Lodpfxjulu Nuj Akfohf Manufactured by Electro Heat Sweden AB.

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,800 mm, loading space volume: 24 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5700 mm x 2420 mm, side walls 600 mm + 2 x 600 mm add-on side walls, complete side wall height approx. 1800 mm, side walls hot-dip galvanized, loading height approx. 1080 mm, 12 x lashing eyes in the floor, reinforced geared support winch with load and fast gear at the front, 2 x folding supports at the rear, 435/50 R 19.5, , chassis and tipper body hot-dip galvanized, , surcharge for:, aluminum ramps, price: 1600 euros, , --  Subject to printing errors, errors and changes, sample images --, more data at: !, more details: ! Lhodpey E H Hnjfx Akfjf

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,600 mm, loading space volume: 22 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, side walls 600 mm, 1,000 mm lattice extension, hot-dip galvanized body, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Lhodpfx Akjy E H Ewsfsf

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,800 mm, loading space volume: 24 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5700 mm x 2420 mm, side walls 600 mm + 2 x 600 mm add-on side walls, complete side wall height approx. 1800 mm, side walls hot-dip galvanized, loading height approx. 1080 mm, 12 x lashing eyes in the floor, reinforced geared support winch with load and fast gear at the front, 2 x folding supports at the rear, 435/50 R 19.5, , chassis and tipper body hot-dip galvanized, , surcharge for:, aluminum ramps, price: 1600 euros, , --  Subject to printing errors, errors and changes, sample images --, more data at: !, more details: ! Lodjy Eth Sopfx Akfehf

Condition: used, Year of construction: 2003, 40 mm bore capacity in cast iron 46 mm Lhjdpfsy Ehx Ssx Akfof 50 mm M 30 M36 MK 4 throat 300 mm 615x430 mm 200-3000 U/min. 2x14x224 mm Distance spindle/table max. 147/688 mm column diameter 145 mm spindle stroke 160 mm feeds 0,1-0,4 mm/U height of the machine 1885 mm drive motor 1,8/2,9 kW weight of the machine ca. 500 kg

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, loading space volume: 15 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, 600 mm drop sides + 500 mm extension drop sides, hot-dip galvanized drop sides, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Lhjdoy Eia Depfx Akfsf

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag Lhedpfxju Ni Rpe Akfef 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: used, We are offering used order picking trolleys for sale. TECHNICAL DATA Height: 1,800 mm Width: 1,270 mm Depth: 470 mm Number of shelves: 3 pcs + clothes rail 2 push handles 4 swivel castors with directional wheel with side step Assembled Condition: used PRICE €150.00 net €178.50 gross incl. VAT Available quantity: 220 units Lhodpfx Aksy Eqp Rofef Tiered pricing (per unit): 1 - 5 units: €150.00 net 6 - 10 units: €142.50 net 11 - 25 units: €135.00 net 26 - 50 units: €127.50 net 51 - 100 units: €120.00 net from 101 units: €112.50 net YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with shipping and assembly. This item is available for collection. Delivery or shipping is available at extra cost. The additional charges depend on delivery location and shipment volume and can be provided upon request. PROJECT CONSULTING Our sales team will be pleased to prepare a non-binding, tailored offer to suit your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with shipping and assembly. PAYMENT TERMS Payment conditions will be agreed in the event of an order. The price is per unit/net (plus VAT), as stated in the description. You will of course receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor systems, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and craft businesses. We continuously offer a variety of attractive used equipment from various manufacturers/brands at competitive rates. If you have any questions, please do not hesitate to contact us. Four in a Row – The Success Factors of DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used order picking trolleys for sale. TECHNICAL DATA Height: 1,800 mm Width: 1,270 mm Depth: 470 mm Number of shelves: 3 pcs + garment rail 2 push handles 4 swivel castors with directional wheel with side step Pre-assembled Condition: used PRICE €140.00 net €166.60 gross incl. VAT Available quantity: 439 units Tiered pricing (per unit) 1 - 5 units: €130.00 net 6 - 10 units: €123.50 net 11 - 25 units: €117.00 net 26 - 50 units: €110.50 net 51 - 100 units: €104.00 net from 101 units: €97.50 net YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We will gladly assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional costs depend on the delivery location and shipment size, and can be provided on request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon when an order is placed. The price is indicated per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, located in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for commerce, industry, and trades. Lodpfx Ajy Eqnmskfohf We continuously offer attractive used equipment from various brands and manufacturers at favorable conditions. If you have any questions, please do not hesitate to contact us. Four ways to win – The success factors of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg Ledpfx Akoy Agpqjfehf dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 Lsdpsvn U Umsfx Akfohf table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m