Used Waldrich Coburg Cross Support for sale (15,247)

Condition: used, cutting width 330 mm Cutting height 135 mm Rodpfx Akoy Tpqlswsu Motor output 2,2 kW The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts.

Condition: used, Year of construction: 2007, Cutting height 175 mm Redpfxoy Tpqfo Akwsu cutting width 750 mm Motor output 5,5 kW saw-blade dia. 550 mm Weinig OptiCut C700 under-table cross-cut saw for safe and precise cross-cutting of solid wood, especially hard and heavy timber with large cross-sections. The machine works with a pneumatically guided saw unit, two-hand control and hold-down device and is ideal for sawmills, timber construction and industrial solid wood processing.

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Wide range of standard sizes and load capacities MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration - we will be happy to create a configuration for your application!!! Rjdoiuvxbjpfx Akwju Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Rodottu Sgepfx Akweu Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10.7233, saw blade diameter: 450 mm, table length: 25,000 mm, The machine has had two owners, both well-known companies in Latvia. We have used the machine ourselves for 8 years. We are selling it because we have purchased new equipment. The machines are in full working order and stored in a heated facility. We can also demonstrate its operation on site. The equipment has been regularly maintained and repaired to ensure maximum profitability and the highest quality of the finger-jointed boards. The machine can be inspected and tested in Kuldīga, Latvia. We are also selling the finger-jointing line that was purchased from Weinig together with this machine. Please see our separate advertisement. Rsdsy Ucpkjpfx Akwou

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10.7233, saw blade diameter: 450 mm, cutting height (max.): 6,000 mm, positioning accuracy: 1 mm, cutting width (max.): 250 mm, total length: 25,000 mm, type of input current: three-phase, year of last overhaul: 2025, The machine has had two owners, both well-known companies in Latvia. We have used the machine ourselves for 8 years. We are selling it because we have purchased new equipment. The machines are in full working order and stored in a heated facility. We can also demonstrate its operation on site. The equipment has been regularly maintained and repaired to ensure maximum profitability and the highest quality of the finger-jointed boards. The machine can be inspected and tested in Kuldīga, Latvia. We are also selling the finger-jointing line that was purchased from Weinig together with this machine. Please see our separate advertisement. Rsdpfxsy Ucn To Akwju

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Rjdpfx Aoy Tpb Rokwsu Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based Rjdpjumrf Aefx Akweu

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Rsdpsy S Ru Asfx Akwou Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, number of aggregates 6 St. cutting width ~ 5.000 mm Cutting height ~ 100 mm Daveba multiple cross-cut saw for simultaneously cutting long boards to several shorter ones (with variable length) without mechanization. Redpfsyztz Rox Akwou The system is dismantled and ready for loading.

Condition: used, d1: 35 mm d2: 27 mm (wrench size) Total length: 115 mm - Available: 2 pcs Redpolkclgefx Akwou Price per piece: €25.00 + VAT.

Condition: like new (used), Roller support, movable, for long profil Rjdpfxsh T Uxwo Akwju

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### PLEASE CALL – NO EMAILS! ##### Rjdpfx Ajy U Ui Nskwou

Condition: good (used), Stegherr 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Voltage 380 V, 50 Hz Rsdpozakw Eefx Akwsu

Condition: used, diameter / mm weight / kg Redpfxsy Supko Akweu Type / 0

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. Rodpfx Asfcdnljkweu The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 500 mm, power: 10 kW (13.60 HP), New Optimizing saw SALVAPUSH 2000 by SALVAMAC The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws. The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software to have a quick and easy communication. Some sections of the program are dedicated to statistic and cutting results, with updates in real time and diagnostic. Rsdpfx Aod Tyf Uokwsu The touch screen, with USB and teleservice connections, facilitates data reading and typing. By Christian Salvador- SALVAMAC

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm Rsdpfxsy Rx Egj Akweu -Weight: 218 kg

Condition: new, load capacity: 3,000 kg, Various support blocks, rollers adjustable in 5 positions, suitable for heavy material. For transverse and longitudinal rotation. Bearing-mounted rollers insertable for longitudinal and transverse transport. Designed to relieve, for example, welding positioners or for transporting or rotating round parts. Available in various versions. Stepless height adjustment available on request. The beams themselves have a load capacity up to 6 tons. Price per piece. Prices from 450 €; with stepless height adjustment 850 €. Rsdpfx Aksy Rf S Heweu

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Redjxg Hanopfx Akwju Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: excellent (used), Rema AP-500 Optimizing Saw Infeed material length: 500–6250 mm Blade diameter: 500 mm Motor power: 6 kW Pusher speed: 60 m/min Rodpfxext Ezkj Akwju Defect cutting: fluorescent chalk reader Margin trimming CE certificate DTR technical documentation Year of manufacture: 2018

Condition: used, band length ca. 1.700 mm + 2.700 mm Rjdpfx Aev Hgb Njkweu cutting width max. 2.500 mm Cutting height max. ca. 80 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Rjdsyv Ewmjpfx Akwju Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories. Rsdpfxoy Ehk Io Akwju

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Redsv Tlgdepfx Akwou Width: 30-200mm High: 13-50mm Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Possible to scan different profiles