Used Woerner Oder Bosch Lubrication Oil Pumps for sale (17,279)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 241 kg, total length: 1,144 mm, total width: 644 mm, total height: 528 mm, volume flow: 244 m³/h, final pressure: 200 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, warranty duration: 12 months, BECKER VTLF 2.250 – Dry-running vane vacuum pump, oil-free Nodpfx Aozwwayob Usdb BECKER VTLF 2.250 industrial vacuum pump, designed for continuous operation and completely oil-free. The composite graphite self-lubricating vane technology allows for operation without oil in the compression chamber, reducing maintenance and operating costs. Capacity: 244 m³/h, ultimate vacuum: 200 mbar absolute, motor: 5.5 kW, power supply: 400 V three-phase – 50 Hz, air-cooled, noise level: 77 dB(A). Equipped with an integrated air filter and a regulating valve. Suitable for CNC machines and vacuum tables, woodworking, packaging, printing and paper, plastics, pick & place handling, vacuum clamping, and industrial automation. Condition: new.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Ndjdpfeqabiaox Ab Ujb Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: Nodpfezlpv Ajx Ab Usdb • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, Ndedpfezltalex Ab Ujb 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, overall weight: 350 kg, total length: 940 mm, total width: 500 mm, total height: 650 mm, volume flow: 345 m³/h, final pressure: 0.15 bar, power: 5.5 kW (7.48 HP), rotational speed (max.): 3,600 rpm, For sale is a high-performance and highly efficient dry MINK claw vacuum pump from the premium manufacturer Busch, model MV 0312 B. MINK claw vacuum pumps and compressors are the result of the continuous development of claw technology. Decades of experience with this technology in countless applications have led to significant improvements. The MINK claw technology combines performance, reliability, and efficiency thanks to its innovative design. It can be used for both vacuum and compressed air generation. The dry and non-contact operating principle enables virtually maintenance-free operation. MINK vacuum pumps and compressors are ideally suited for industrial applications where constant vacuum or constant overpressure and oil-free operation are required. Data: • Manufacturer: Busch Vacuum Solutions • Model: MV 0312 B • Year of manufacture: 2024 • Condition: Like new, fully functional (last manufacturer maintenance was performed in October 2025) • Location: Graz (Austria) • Technology: Dry claw vacuum pump • Suction capacity (50 Hz): 290 m³/h • Suction capacity (60 Hz): 345 m³/h • Ultimate pressure: 150 mbar (absolute) • Motor rated power: 5.5 kW (at 50 Hz) / 6.5 kW (at 60 Hz) Ndodjyxvqvopfx Ab Usb Pictures/Videos: Original pictures and videos will be provided upon request. Condition and scope of delivery: • Condition: fully functional - last manufacturer maintenance was performed in October 2025 • Includes original motor and base feet (vibration-damping). Terms of sale: • Price: €10,900 excl. VAT (negotiable) • Invoice: Price is quoted net plus 20% VAT. A proper invoice will be issued. Interested? Please contact us to arrange a viewing or to receive a quote.

Condition: good (used), Year of construction: 1993, Giardina oil laquer roller 2 roller Ndodpoz D I U Eefx Ab Usb 2 brush spreader

Year of construction: 2023, condition: like new (used), functionality: fully functional, EDUR CBL 80-200/211 Centrifugal Process Pump, 111 m³/h, 28.8 kW, Stainless Steel, 2023 Description For sale: an industrial EDUR CBL 80-200/211 process pump from the renowned German manufacturer, EDUR Pumpenfabrik. The pump was manufactured in 2023 and is in fully functional condition, ready for immediate operation and requires no additional investment. The unit is made of AISI 304L stainless steel and equipped with an energy-efficient Lammers IE3 Premium Efficiency motor. The pump is mounted on a steel frame. It is ideally suited for use in the food, chemical, and oil industries, as well as in process plants. Technical data * Manufacturer: EDUR * Model: CBL 80-200/211 * Year of manufacture: 2023 * Condition: used, fully functional * Type: centrifugal process pump * Flow rate: 111 m³/h * Head: 56.1 m * Motor power: 28.8 kW * Motor: Lammers IE3 Premium Efficiency * Voltage: 400/690 V * Frequency: 50 Hz * Speed: 2900 rpm * Maximum working pressure: 10 bar * Maximum medium temperature: 60°C * Material: AISI 304L stainless steel * Motor protection class: IP55 * Weight: 308 kg * Available immediately Application The pump is designed for the transportation of: Ndodpfx Aboy Amr Ss Usb * vegetable oils, * animal fats, * biodiesel (FAME, UCOME), * fatty acids (FFA), * food liquids, * chemical liquids, * process media, * process water. EDUR CBL 80-200/211 Process Pump | 111 m³/h | 56.1 m | 28.8 kW | AISI 304L | Year 2023

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer Njdpfszkt Rzex Ab Uodb - width of workpiece 35 – 130mm - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Year of construction: 2005, condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich ESE 320 G 20-240-54 -Hydraulic pump: Type -Motor: Type 1 547 220 535 24 V 2.2 kW -with: tank and control valve Nsdei Aqa Uopfx Ab Uodb -Dimensions: 175/160/H365 mm -Weight: 9,6 kg

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Ndodjg Icfpjpfx Ab Ujb Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] Njdpfxoxur E Ss Ab Ujdb - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Ndjdpfx Abszz Tm Rj Ujb Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1996, functionality: unexamined, Used hydraulic unit from a Windsor injection molding machine, consisting of: Ndjdoz D S Enepfx Ab Usb - Electric motor Schorch KA7315M-BB03F-Z, manufactured in 1996, with 132 kW - Hydraulic pump Sauer, type 88P 226-197 LF - Reservoir tank with oil cooler, filters, and hydraulic block - Corresponding Lenze inverter in a suitable control cabinet Please refer to the attached images for further details. Collection in 42781 Haan, loading with a crane is possible.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, BUSCH R5 RA 1000 B | Rotary vacuum pump / High-performance vacuum unit Ndedpfoy Umv Iox Ab Ujb Manufacturer: Busch Vacuum Solutions Model / Type: R5 RA 1000 B 4Z1 EKXX Serial number: C035000168 Year of manufacture: 2003 Power supply: 400 V / 3 Ph / 50 Hz Capacity: 1000 m³/h Rotational speed: 1000-1200 rpm Overall dimensions: 1800 x 1000 x 1700 mm The Busch R5 RA 1000 B, an industrial rotary vacuum pump, is one of the most reliable and powerful vacuum devices available on the market. This model, with its enormous suction capacity of up to 1000 m³/h, has been designed for continuous, uncompromising operation in the most demanding industrial environments. Devices of this class are the heart of the machinery in large meat processing plants, slaughterhouses, food packaging plants, as well as in the chemical industry and plastics processing. The pump's design is based on proven oil-lubricated rotary vane technology, which allows for achieving stable, very high ultimate vacuum while maintaining quiet operation and optimal system temperature. The RA 1000 B model is characterized by exceptional resistance to water vapor and volatile product particles thanks to its advanced, internal oil filtration and recirculation system. Using this pump as a central vacuum unit allows for the simultaneous operation of multiple packaging or process machines in production halls, resulting in significant energy savings and simplified maintenance.

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Type: U 120 V4 0.18 No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Ndsdpfsxrgu Aox Ab Uob Motor power: 0.18 kW Tank capacity: approx. 8 liters Power supply: 400 Volts, 50 Hz - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Net weight: 20 kg Good condition

Condition: refurbished (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, workpiece weight (max.): 500 kg, table diameter: 450 mm, total length: 7,200 mm, gear diameter: 500 mm, total height: 3,300 mm, total width: 4,500 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 240 mm, spindle speed (max.): 450 rpm, table bore: 125 mm, spindle speed (min.): 100 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 16,800 kg, distance table to spindle center: 710 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Nsdpfx Aoz Et E Eob Uodb Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump, radial piston pump -Double hydraulic pump: radial piston pump with clutch -Pump: unfortunately no exact type designation -Part No.: A3918 2 515 105 780 Ndodpfxjpy Rybj Ab Uob -Clutch: Kupplungstechnik Rheine PL 350/15/ -Dimensions: see photo technical. drawing -Dimensions: 730/470/H470 mm -Weight: 164 kg

Condition: used, This listing is for a Charles Austen Pumps Dymax 30 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Dymax series includes diaphragm pumps that are engineered to deliver a clean, oil-free vacuum or pressure source, making them ideal for a range of applications from laboratories to industrial settings. Key Specifications: Dimensions: Approximately 210 x 151 x 125 mm (width x depth x height), allowing for compact installation. Max Flow Rate: Capable of achieving a maximum flow rate of up to 14 L/min, ensuring efficient performance for various tasks. Ultimate Vacuum: Can reach an ultimate vacuum of up to 240 mbar, suitable for applications requiring low pressure. Weight: Each unit weighs around 1.6 kg, making it lightweight and portable. Features: Continuous Operation: Designed for long-term use without overheating, making them reliable for demanding applications. Whisper Quiet: Operates at low noise levels, ideal for environments where sound levels need to be minimized. Ndodsxxz Nhepfx Ab Ujb Rugged Reliability: Built to withstand tough conditions, ensuring long-lasting performance. Flexibility and Customization: Can be tailored to meet specific requirements, enhancing versatility across different applications. Safety Compliance: Adheres to IEC 1010 standards, ensuring safety in operation. Applications: The Dymax series pumps are suitable for a variety of uses, including: Laboratory Use: Ideal for tasks requiring accurate and clean vacuum or pressure sources. Industrial Applications: Versatile enough for various processes in manufacturing settings. OEM Uses: Customizable options make them suitable for original equipment manufacturers needing specific functionalities.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Ndedezvrmropfx Ab Ueb Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type Motor: Type 1 547 220 506 24 V 2 kW Ndedpfx Asiz Dr Hjb Usb -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.

Condition: new, Year of construction: 2025, functionality: fully functional, Two new SKF piston pumps with reservoirs are for sale. Due to a change in the ongoing project, they cannot be used as originally planned. Manufacturer: SKF Type: PPU-35-2.5W Available quantity: 2 Ndjdpfxezt Hqtj Ab Ueb Condition: New, unused, as they are not suitable for our project Lubricants: Oils and greases up to NLGI class II Pre-pressure: max. 30 bar Operating pressure: 4.5 - 10 bar Output pressure: max. 160 bar Adjustable flow rate: PPU-5: 0.1 - 0.5 cm³/stroke, ratio: 1:28 PPU-35: 0.7 - 3.5 cm³/stroke, ratio: 1:25 Compressed air connection (P1): M10x1 Lubrication line connection: for Ø 10mm Suction connection: M18x1.5 Lubricant reservoir: 2.5 kg or 5 kg Level switch for minimum grease level optional Price per unit: €3,350 net

Condition: new, Year of construction: 2026, The KVT 3.140 is a medium vacuum, dry-running displacement pump designed to operate on a continuous duty basis. It utilises self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change. 100% dry-running (oil-less) operation Long vane life Continuous duty rated SPECIFICATIONS Volume flow 50 Hz 129 m³/h Vacuum absolute 50 Hz 100 mbar Power 50 Hz 4.0 kW Noise Level 50 Hz 76.0 dB(A) Volume flow 60 Hz 154 m³/h Vacuum absolute 60 Hz 200 mbar Power 60 Hz 4.8 kW Ndodpett Ixdjfx Ab Uob Noise Level 60 Hz 79.0 dB(A) Weight 78 kg without motor

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Busch R5 RA0630 B Vacuum Pump Brand: Busch Ndsdpfsycl Hysx Ab Ueb Type: R5 RA0630 B Year of manufacture: 2012 Voltage: 400 V Oil capacity: 15 L The Busch R5 RA0630 B vacuum pump is an oil-lubricated rotary vane pump from the R5 series. The R5 RA0630 B model stands out due to its high air pumping capacity, making it suitable for both central vacuum systems and process applications across various industries. The rotary vane technology in an oil bath ensures efficient removal of gases and air, while the robust design allows for seamless integration into industrial installations. Its excellent durability and sturdy construction make this pump ideal for continuous operation, even under demanding production conditions. Due to its universal design, it is used in food processing, pharmaceuticals, vacuum packaging, and vacuum installations in various technological processes.

Condition: excellent (used), Year of construction: 2000, Hydraulic pump, brand Flutec - Bosch I Nodpfx Ashgw Eteb Usdb Year of manufacture 2000 PT-350/2, T/W FK081-K

Condition: good (used), Manufacturer : Flygt Type : 2101 Overall dimensions : 650 x 490 x 790 mm Electrical data : 400 V; 80 A; 32 KW; 2000 rpm Lifting height : 20 m Weight : 100 kg Nodpjt H Nc Eefx Ab Uodb