Used Zorzi Low Loader Semitrailer for sale (15,210)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website: -ge.de. The following is an excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, with a rear slope of approximately 1,000 mm x 6° * For semi-trailer tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grated steel flooring with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approximately 500 mm wide * Round NATO socket on the connection bar at the front (Maeler & Kaege VG 96 917) * 1 pair of plug-in aluminum side panels on the gooseneck, approximately 400 mm high, with an anodized finish * 1 LED work light each on the left and right sides at the top of the front wall, operated via an on/off switch (operating the work lights from the semi-trailer tractor is not possible in this case) LOADING AREA: * Loading area, approximately 9,600 mm long, with a rear slope of approximately 900 mm x 6° * Loading area behind the gooseneck can be hydraulically raised and lowered, approximately 3,000 mm long, with a load capacity of up to approximately 9,000 kg * Continuous grated steel flooring with approximately 5 mm sheet metal backing as additional reinforcement on the lifting platform and the loading area, designed for point loads TIRES: * 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse locking function, activated via reverse gear and manually * 1st axle with starting assist * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grated steel flooring, approximately 4,920 mm long and approximately 900 mm wide * Hydraulically folding ramp tips * Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp operation controls * Ramp locking in the driving position by means of a quick-release mechanism * Painted sandblasted coating on the outer frame of the ramp and on the ramp tip * Mechanical supports in drop-pipe design on the sides of the ramps for support when connecting to loading docks * Operating valves for the hydraulic ramps on the right side of the vehicle Pjdpfx Adjy Auhhokegp BRAKE SYSTEM: * WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection PAINTING: * Trailer: Carmine Red (RAL 3002) * Rims: Silver Gray * Side panels: Aluminum, natural finish * Wheel hubs: According to axle manufacturer * Lamp housing: Pure White (RAL 9010) EQUIPMENT: * Steel front wall, plug-in, approximately 1,600 mm high, including a connection bar for supply lines to the semi-trailer tractor, mounted approximately 1,000 mm from the bottom edge of the outer frame profile * Attachment option for lashing chains on the inside left and right sides of the front wall, including aluminum trays underneath on the left and right sides for storing chains or tension straps * Appro

Condition: used, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 07/2021, total width: 3,000 mm, total height: 3,760 mm, Equipment: ABS, * Separate hydraulic unit * Hydraulically adjustable loading ramps * 4 hydraulic auxiliary supports * Hydraulically extendable low-bed (3000mm) * Extendable loading platform (500mm) * AXION radio system with remote control * Gooseneck with sideboards & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E system * SAF axles with drum brakes * Wabco SmartBoard unit * Height-adjustable low-bed * Rear view camera * Telematics ----The following work was carried out in February by ES-GE Nutzfahrzeuge.* Brake drums, brake shoes & pads, brake cams, bushings & linkage adjusters replaced on all 4 axles * Sprag cylinder heads replaced * Bearings of the axle pivot supports on TwinAxle II replaced * Electrical system lighting repaired * Hydraulic accumulator replaced * EBS system repaired * Electric pump checked * HD oil and filter replaced * Axle play checked * Central lubrication system checked * Lever of the suspension repaired * Sensors for height adjustment repaired * Distribution box at the front repaired * Wooden floor repaired * Cover plates repaired * Compressed air tank reattached * Wheel bearings checked ----* Tire dimension: 245/70R17.5 * Technical total weight: 73000 kg * Tare weight: 14600 kg * Overall length: 13200 - 16200 mm * Overall width: 2540 - 3000 mm * Kilometers driven: 194000 km * Next inspection due: 09.2026 ----Vehicle number: 12154----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle * TÜV/SP inspection Pjdpfx Adjzbw N Rjksgp * Complete export processing * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, maximum load weight: 31,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, total width: 2,550 mm, Equipment: ABS, Meusburger MPG-3 Low-loader, flatbed with steering/lift axle, hydraulic ramp Equipment: Air suspension * Axle weighing system * 1st axle: lift axle * 3rd axle: steered * Hydraulic ramp with additional supports and remote control * Through-type ramp * Electric winch with remote control * Edscha cover * Storage boxes on both sides Pedjwfwd Djpfx Adkogp * Spare wheel in driving condition * Additional spotlights * Extendable overwidth signs Safety: ABS * EBS * Disc brakes Errors and prior sale excepted. Internal vehicle number: 8303

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 01/2009, next inspection (TÜV): 03/2026, loading space length: 24,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 2,500 mm, Equipment: ABS, Goldhofer Gooseneck Lowboy Trailer * 5 axles, twin-tired * Extendable lowbed (8m) Pgjdpfewta Dpox Adkep * 1st axle can be lifted * Forced steering on the last 4 axles * Hydraulic supports * Central lubrication system * BPW axles with drum brakes ----* Tires: 235/75 E17.5 * Permissible total weight: 70,000 kg * Tare weight: 17,900 kg * Loading platform height: 0.85 m * Loading platform width: 2.55 m * Lowbed length: 12.00 m - 20.00 m * Gooseneck length: 4.0 m -----Vehicle number: 11037----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Application for export license plates * Vehicle transport * Vehicle registration * Vehicle recovery and transport ----?YOUR VTS TEAM

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes * Trailing axles * Hydraulic loading ramps * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg Pgodpfsza Rlisx Adksp * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. ----?YOUR VTS TEAM

Condition: used, axle configuration: 2 axles, first registration: 08/2021, Equipment: ABS, 2-axle semi-trailer, low-loader, Manufacturer: ES GE 2STL, first registration: 08/2021, 2 steerable axles, Access ramps, powerful winch, toolboxes, remote control, and more. In very good condition. Price: €41,900.00 plus VAT (19%). Pjdpfx Aszml Abjdkogp Subject to errors and prior sale.

Condition: new, maximum load weight: 73,540 kg, overall weight: 1,02,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Pgjdoxbmplopfx Adkjp Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: new, overall weight: 31,000 kg, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Year of construction: 2025, Equipment: ABS, 2-axle inclined semi-trailer in special design with loading ramp for machine and forklift transport. Mega design with a coupling height of approx. 960 mm. Tapered construction for maximum internal height. Dimensions: Length: 13,600 mm Width: 2,480 mm Height, tapered from rear to front: approx. 3,300 mm to 2,800 mm Pgsdpfx Ajx Hb Rdjdkjp Wheel recesses including fill-in pieces VSE Smart Steering axle (steers forwards and backwards) Aluminum floor for extreme wheel loads, including anti-slip coating Alcoa DB alloy wheels on the outside Curtainsider body with lifting roof RSAB IceProtect Rear extendable Oversize warning plates Rear ramp in extendable version for minimum approach angle, including angle reduction Electro-hydraulic drive Comprehensive load securing equipment Upon request, we also supply the appropriate 3-axle tractor unit for purchase or rent. Further information available on request.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed Semi-Trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm Pedpfsynprwex Adkegp * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension travel: 260 mm (190 mm / -70 mm) * Additional ride height lift by 40 mm possible * Load gauge for axle load display * Semi-automatic alignment of steered axles with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED tail and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED beacon (1 unit) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on the gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2-inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood floor * Each platform size: 100 × 1,300 × 2,115 mm * Each platform weight: 225 kg * 2 × lashing rings per platform with 8,000 kg tensile force * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform Stake pockets: * 6 × 2 units in the pool (50 × 100 mm) * 3 × 2 units at the rear (50 × 100 mm) Attachments & Accessories * Aluminum front panel on gooseneck: 360 × 1,550 mm * Aluminum side boards: 360 × 1,900 mm * Aluminum rear wall: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning panels (423 × 423 mm, up to 1,000 mm) * Yellow side reflector tape * Red rear reflector tape For further information, we are at your disposal.

Condition: used, maximum load weight: 26,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese Mega curtain-side trailer with Dhollandia ramp 9t * Dhollandia tail lift with ramp function * Type DHLSU.90, lifting capacity 9,000 kg, load centre 1,000 mm, supports * Remote control * SAF axles with air suspension and disc brakes * 1st axle liftable * Stainless steel toolboxes * Tyres 435/50R19.5 Pgsdpfxeyrkpre Adkep For further information, we are at your disposal

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Pedpfx Ajzlwm Aedkogp Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, Excerpt of Equipment Gooseneck * with angled front corners approx. 45° and rear angle approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Loading Platform * in double-extendable design with rear angle approx. 500 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 4 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings positioned horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood decking approx. 48 mm thick, with diamond plate decking over the axles Pgjdpezlwm Nsfx Adkep * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Kingpin * JOST kingpins (mechanical) with 2-speed gear for approx. 24 t lifting capacity (approx. 50 t test load) Braking System * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) * Topcoat, single color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Metallic paint not possible Steel Construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15 pole * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front panel, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holder on the front panel (± 5kg) * A spare wheel holder in front of the front panel * Electro-hydraulic power unit (± 45kg) * Steering from the front and rear by means of cable remote control operated via push buttons, with single-axle control (without installation in the tractor unit) * Mounting at the rear of the gooseneck for aluminum loading ramps * European reflector plates (red-yellow) at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * On the gooseneck and at the rear panel, one holder each on the left and right for warning signs including socket * Mounting rail for aluminum loading ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * Galvanized folding supports under the angle of the loading platform * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram.

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting Pgjdpfx Adozlmkwskop 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Pedpfxjyxb Tvo Adkjgp Roadworthiness certificate valid until 01/2027

Condition: used, empty load weight: 16,400 kg, maximum load weight: 28,600 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space length: 12,400 mm, loading space width: 2,450 mm, suspension: air, color: green, gearing type: other, driver cabin: other, Equipment: ABS, hydraulics, * German complete vehicle from a single owner * Doll heavy-duty low-loader with detachable gooseneck + electric ramps * including MB 2663 heavy-duty semi-trailer tractor 6x4 from the year 2016 Pgjdpfjzk Rchox Adkjp * MB 2663 with large hydraulics, retarder, sleeper cab * Trailer with detachable gooseneck * Payload 35,570 kg * electric, hydraulic loading ramps * complete vehicle from a municipal previous owner * Panther chassis technology * 3 BPW axles, steered * all axles with hydraulic axle equalization * municipal previous owner * laterally positioned driving surfaces * total length 16.61 meters * low-bed length 8.4 meters + 4 meters of extension at the rear * loading height 300 mm * width 2.55 meters * DOLL tronic® - an intelligent operating and control system based on CAN bus. With its sophisticated sensors, it provides easy and safe operation of all central trailer functions. Colored LEDs clearly show you the position of your vehicle. - High-quality keypads at the rear and gooseneck - Control of all functions: gooseneck, steering, driving level - Permanent monitoring of positions - Integrated into the system: operation of the ramps and monitoring of the central lubrication system * Comfortable operation of steering and driving level via keypads and DOLL connect® remote control * Loading ramps, length 2.5 meters - hydraulically adjustable and movable with remote control * Excellent off-road capability with a maximum steering angle of 55° * Single-wheel suspension, hydraulic forced steering and with electro-hydraulic auxiliary steering * Always a horizontal platform thanks to the hydraulic axle equalization * Easy maneuvering in confined spaces and on difficult terrain * Perfect road handling even at low ride height and high load center of gravity * Lashing eyes * Axle load 3 x 12,000 kg * Axle spacing to 1/2/3 axle 1.36 meters * Rotating beacon * Drum brakes * Axles BPW Eco * Storage box * Semi-trailer load 21,000 kg If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, interim sales and errors excepted.

Condition: used, empty load weight: 16,400 kg, maximum load weight: 28,600 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space length: 12,400 mm, loading space width: 2,450 mm, total height: 1,66,100 mm, color: green, gearing type: other, driver cabin: other, Equipment: ABS, hydraulics, * German heavy-duty low-bed trailer from first owner * Doll heavy-duty low-bed trailer with detachable gooseneck + electric ramps * Heavy-duty semi-trailer from premium manufacturer DOLL, type Panther T3E-0S3L * Detachable gooseneck * Payload 35,570 kg * Panther chassis technology * 3 BPW axles, steered * All axles with hydraulic axle equalization * Side-mounted running boards * Overall length 16.61 meters * Low-bed length 8.4 meters + 4 meters extension at the rear * Width 2.55 meters * DOLL tronic® – an intelligent operating and control system based on CAN bus. With its sophisticated sensors, it provides simple and safe operation of all central semi-trailer functions. Colored LEDs clearly show the position of your vehicle. - High-quality keypads at the rear and on the gooseneck - Control of all functions: gooseneck, steering, ride height - Permanent monitoring of positions - Integrated into the system: operation of the ramps and monitoring of the central lubrication system * Comfortable operation of steering and ride height via keypads and DOLL connect® wireless remote control * Loading ramps, length 2.5 meters - Hydraulically adjustable and movable with remote control * Excellent off-road capability with a maximum steering angle of 55° Pgodpozk Rb Rjfx Adkjp * Single-wheel suspension, hydraulic forced steering and electro-hydraulic auxiliary steering * Always a horizontal platform thanks to the hydraulic axle equalization * Easy maneuvering in confined spaces and on difficult terrain * Perfect road handling even at low ride height and high load center of gravity * Lashing points * Axle load 3 x 12,000 kg * Axle spacing to 1/2/3 axle 1.36 meters * Rotating beacon * Drum brakes * BPW Eco axles * Storage box * Fifth-wheel load 21,000 kg * Gross vehicle weight 45,000 kg - technically possible 57,000 kg * Tare weight 16,400 kg * Payload 28,600 kg - technically possible 40,600 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Condition: used, empty load weight: 11,800 kg, maximum load weight: 36,200 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2022, total length: 2,550 mm, suspension: air, tire size: 245/70 R17,5, Equipment: ABS, | Faymonville Telemax F-S43 low loader | 3 axles steered by remote control | Heavy duty lashing points | SAF axles | extendable | Stake pockets | Tires: 245/70 R17.5 | Total weight: 48,000 kg, payload: 36,200 kg | 13,500mm+7,900mm+8,100mm | Subject to error, input mistake and prior sale. Pgedpfewm I Ipjx Adkep

Condition: used, empty load weight: 13,100 kg, maximum load weight: 22,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2013, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | VAN ECK UT3Z double-decker refrigerated box semi-trailer | Carrier Vector 1950 Diesel hours: 8791h | Total weight: 36,000kg, payload: 22900 kg | Loading area dimensions: 1st deck: Length: 13.20m Width: 2.48m Height: 1.82m 2nd deck: Length: 9.65m Width: 2.48m Height: 1.82m Deck: Length: 9.65m Width: 2.48m Height, 1.78m Clearance between axle unit 1.50m | Portal doors | BPW axles with Tridec independent suspension, | 2 zone refrigeration, 2x evaporator, | 385/55R22.5 tires | Wabco Smartboard, | Subject to errors, input and prior sale. Pgedpfsmu Nznex Adkep

Condition: used, empty load weight: 7,500 kg, maximum load weight: 25,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SKVT 24 Double-decker refrigerated trailer | SAF axles with disc brakes | Carrier 1200 | 385/65R22.5 | Toolbox | Cooling data recorder | Electric and diesel freezer unit | Double-decker in good condition | Subject to errors and advance sale Podpfx Aowcf Ifjdkegp

Condition: used, empty load weight: 8,550 kg, maximum load weight: 26,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SVKA 24 Refrigerated Double-deck Semi-trailer | SAF axles with disc brakes | Carrier Maxima 1300 | 385/65R22.5 | Toolbox | Temperature data recorder | Electric and diesel deep-freeze unit | Good condition, double-deck | Pallet box | Subject to error, input mistake, and prior sale Pgjdew Hbuispfx Adkop

Condition: used, empty load weight: 8,563 kg, maximum load weight: 30,437 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2016, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | KRONE SD Cool Liner | Carrier 1350 aggregate | Lift axle | Pallet box | Krone axles with disc brakes | Tool box | approx. 9,520 diesel hours | Tires 385/65R22.5 Errors, input and advance sales reserved. Pedpsv An A Tsfx Adkjgp

Condition: used, empty load weight: 8,969 kg, maximum load weight: 27,031 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2013, suspension: air, tire size: 385/55R22.5, Equipment: ABS, truck registration, KRONE SD refrigerated semi-trailer double deck | Carrier 1550 with electrical connection | Pallet box | Lift axle | BPW axles with disc brakes | Toolbox | Lashing rails | Temperature recorder | Spare wheel holder | Diesel hours: 8,123 h | Internal width 2.46m | Internal height 2.64m | Subject to error, input mistake and prior sale Pedpfx Adew Uighskjgp

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system Pgjdpfx Aezk S Dmjdkop * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 Pgsdpezkx Hbofx Adkjp - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile