Used Dpx Power Loadbank Ac400V-2.000 Kw - Dpx-30028 for sale (52,675)

Condition: used, Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Isdpfoziizmex Agyjih Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) Iiodpfxszil Uij Agysh We will gladly answer any further questions you may have by phone.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed Iedpfx Agszii A Djyoih General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, DEWETRON High-End Power Analyzer DEWETRON DEWE3-PA8-RM / DEWE3-RM8 4-Phase Power Analyzer with TRION3-1810M-PA Up to 10 MS/s – modularly expandable 19" measuring system For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design with a built-in TRION3-1810M-PA power module and the connection and measuring accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM Iodpszyl Sijfx Agyeih Chassis type plate: DEWE3-RM8 Revision: 1.1 Design: stationary rack-mount power analyzer TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measuring channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measuring range of the power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Power supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to the type plate: 500 W Made in Austria Sensor power supply: Integrated redundant sensor power supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Features: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current/measuring channels I1–I4 CNT1 / CNT2 TRIG DC AUX Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Integrated redundant sensor power supply Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Condition: Used Device can be switched on Optical condition according to pictures Dimensions 442 × 435 × 222 mm Weight: 15.8 kg Scope of delivery: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x installed TRION3-1810M-PA power module Measuring, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures The table or other items shown in the photos are not included in the sale unless explicitly mentioned. Shipping via UPS freight service is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower Iedpez Syx Hjfx Agyeih -Type: unfortunately no longer readable -Volume flow rate: m³/h -Motor: Loher eA 112MA-4 (EX) e G 1/2 3.6 kW 1410 rpm -Inlet connection: Ø 450 mm -Output connection: 450 x 275 mm -Fan wheel: Ø 600 x 190 mm -Protection class: IP 44 -Dimensions: 1030/760/H1020 mm -Weight: 132 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 52,530 h, punching force: 31 t, sheet thickness (max.): 5 mm, overall weight: 22,000 kg, controller manufacturer: FANUC, CNC punching machine manufactured in 2000. This Finn-Power SG6 Shear Genius features a punching force of 270–300 kN and a maximum punch diameter of 89 mm. It has a punching area of 1500 × 3000 mm and includes a tool turret with 20 stations. If you are looking to get high-quality punching and shearing capabilities, consider the Finn-Power SG6 Shear Genius machine we have for sale. Contact us for further details. • Max. punch diameter: 89 mm • Max. sheet thickness (punching): 5 mm • Punching area: 1500 × 2500 mm (with repositioning: 1500 × 3000 mm) • Max. usable area: 1500 × 3000 mm • Tool turret: 20 stations • AutoIndex stations: 2 × B, 1 × C, 1 × D • Fixed stations: 8 × B, 2 × C, 1 × D (Forming) • Multitools: 5 • Automatic bidirectional turret rotation: Yes • Automatic CNC tool change: Yes • Shear cutting length: 1500 mm • Max. steel thickness (shearing): 5 mm • Anti-burr system: Yes • Shear actuation: Hydraulic • Working pressure: 120–160 bar • Hydraulic oil tank: 330 l • Electrical connection power: 80 kVA • Average power consumption: Approx. 30 kW • Working hours: 52,530 h • Connected to power: Yes • Fully operational: Yes • Technical documentation/data: Available • Reason for sale: Replaced by laser with storage; current production needs and floor space optimization Additional equipment • Automatic loading system: LD 3000/2+2W (Year 2000) • Max. sheet length: 3000 mm • Automatic sheet alignment: Yes • Servo-controlled movement: Yes • Stacking system: STS 2/3000 (Year 2000) • Max. stacking load: 1000 kg Iijdoz R Rn Rspfx Agyjh • Stacking areas: 2 × (3000 × 1500 mm) • Unloading system: 4 independent CNC-controlled traps • Automatic scrap separation: Yes • Included tooling: Punches and dies (final tooling list to be confirmed) • Spare parts included: Some spare parts for consumable components

Condition: used, VÖTSCH Industrial drying cabinet / chamber dryer / chamber drying oven Vötsch VTL 75/100 Industrial convection drying cabinet up to 250 °C with 562 liters of usable volume For sale is a used industrial drying cabinet from Vötsch Industrietechnik GmbH, model VTL 75/100. The VTL 75/100 is an electrically heated chamber dryer for industrial drying, heating, and tempering processes. The VTL series is designed for drying processes with controlled exhaust air extraction and takes into account the safety requirements of EN 1539. The unit features a spacious drying chamber with removable wire mesh shelves, an insulated door with an all-round seal, and a side-mounted control and operating unit. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTL 75/100 Equipment type: Industrial drying cabinet / chamber dryer Rated temperature: 250 °C Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Connected load: 20 kW Rated power: 18 kW Rated current: 29.0 A Usable volume: 0.562 m³ / 562 liters Steam volume: 0.998 m³ Isdpfjz N Am Isx Agyeih Minimum exhaust air volume flow: 240 m³/h Internal dimensions according to manufacturer: Width: approx. 750 mm Height: approx. 1,000 mm Depth: approx. 750 mm External dimensions according to manufacturer: Width: approx. 1,470 mm Height: approx. 1,900 mm Depth: approx. 1,210 mm Empty weight: approx. 475 kg The external dimensions and weight are manufacturer's specifications for the VTL 75/100 model size. Deviations may occur depending on the specific equipment. Equipment: Electrical heating Convection system with fan Exhaust system with fan and air duct JUMO dTRON 304 temperature controller Additional digital display and control unit Several removable wire mesh shelves Insulated drying chamber Single-leaf door with all-round seal Side-mounted control cabinet with operating elements Main switch and indicator lights Electrical control and switching components Application areas: Industrial drying processes Drying of coatings and paints Heating and tempering of components Material testing and heat treatment Production and manufacturing processes Research and development Scope of supply: 1 x Vötsch VTL 75/100 industrial drying cabinet Wire mesh shelves as shown in the pictures Other equipment as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Shipping by freight forwarder is possible upon agreement. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo power supply, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Iijdpfx Asi Ebrgsgyeh

Condition: ready for operation (used), Siemens 6EV3055-0BC power supply, version K, serial number as shown in the photo, used, professionally refurbished and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. Ijdpfx Asi Edv Eogysih

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 0872101270802, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 6,000 h, laser power: 3 W, pipe diameter (max.): 152 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 23 kg, type of cooling: water, overall weight: 23,900 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Model: ADIGE / BLM GROUP LT7 Machine Type: Automatic 3D fiber laser tube/profile cutting machine Laser Source: Fiber laser Laser Power: 3kW Cutting Diameter: Ø12 – Ø152.4 mm 3D Cutting Head: BLM GROUP 3D Tube Cutter Max. Profile/Bar Weight: 23 kg/m Minimum Loadable Length: 1900 mm Max. Loadable Length: 6500 mm Automatic Loading: Yes Bundle Loading: Yes Single Profile/Bar Loading: Yes Max. Bundle Loading Capacity: 5,000 kg Automatic Unloading: Yes Unloading Position: 3 programmable positions Iedpezzzb Asfx Agyeih Unloading Length: 6500 mm Processable Materials: Carbon steel, stainless steel, aluminum, copper, brass Standard Configuration: 6500 mm loading + 6500 mm unloading Machine Weight: Approximately 23,900 kg (including fume extraction system) Average Power Consumption – O₂: 15 kW Average Power Consumption – N₂: 20 kW

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Iisdpjxw Tg Njfx Agyjh Main machine WORKING – vacuum pump requires replacement or repair.

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Iisdpfx Agsu Eki Ssyeh Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: good (used), electric motor, three-phase motor -Power: 1.5 kW -Speed: 1420 rpm -Voltage: 220 V (internally connected in delta configuration) -Shaft: Ø 19 mm -Design: B5 -Protection class: IP 55 -Dimensions: 360/260/H200 mm -Weight: 32 kg Iijdpfxocxv Sio Agyoh

Condition: good (used), Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in its current condition as inspected -Gearbox base: Damage, see photos -Manufacturer: Nord, Type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Engine: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Design: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm Iiodsilq Hijpfx Agyjh -Protection class: IP 55 -Dimensions: 480/185/H305 mm -Weight: 28 kg

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control DELEM Iodpfxoz Npz Ej Agysih oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request ----- POWER BEND PRO electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg Isdpfx Asbpg Ncogyeih • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor Isdpfx Aoi Dfidogyoih with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Iisdjcdr Enspfx Agyeh Subject to prior sale.

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 Iodpsc Nlynofx Agyeih -Number: 1 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Iisdpezii Awofx Agyoh Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, EA Elektro Automatik Type: EA-EL 9080-170 B Electronic DC load, USB / Analog / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type Socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNom Overcurrent protection range 0...1.1 * INom Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setpoint values Δ / K Current / Voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNom Display: Accuracy ≤ 0.1% UNom Remote sensing compensation Max. 5% UNom Current regulation Setting range 0...173.4 A Stability at ΔU < 0.1% INom Accuracy (at 23 ± 5°C) ≤ 0.2% INom Display: Accuracy ≤ 0.1% INom Rise time 10...90% INom < 23 μs Fall time 90...10% INom < 46 μs Power regulation Setting range 0…2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance regulation Setting range 0.04…15.3 Ω Accuracy (at 23 ± 5°C) ≤ 1% of the resistance end value + 0.3% of INom Display: Accuracy Included in the accuracy of the setpoint value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, Remote control on/off, R-mode on/off Status signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation to the device Max. 400 V DC Sampling rate Setpoint inputs 500 Hz Isolation: Input (DC) to housing DC-minus: permanently max. ±400 V DC-Plus: permanently max. ±400 V + max. input voltage Input (AC) to Input (DC) Max. 2500 V, briefly Climate: Cooling method Temperature-controlled fan Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x Master-Slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, EtherCAT Galvanic isolation to the device Max. 400 V DC Connections: Rear Share-Bus, DC input, AC input, Sense, Analog interface, USB-B, Master-Slave bus, Interface module slot Front USB-A Dimensions: Housing (W x H x D) 19" x 2 U x 464 mm Total (W x H x D) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Documents & Downloads Datasheet: Operating manual Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Iedpfx Ajuv Eudjgyoih We will gladly answer any further questions you may have by phone.

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Iiedpfxszzn Iij Agyoh Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Knürr-Heinzinger Type: PHN 1200-4 Power supply: Mains power supply 1200 volts 4 amperes Iijdpfxjzgcbhs Agyeh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, FRIULAIR Industrial Chiller / Water Cooler / Chiller Friulair CWE068 Nominal cooling capacity 48.5 kW according to the nameplate Year of manufacture 2023 – air-cooled industrial chiller with integrated water circuit For sale is a used industrial chiller from the manufacturer Friulair S.r.l., model CWE068. The chiller is suitable for cooling industrial plants, machines, test benches, production facilities, and process circuits. The CWE series is designed as an air-cooled water cooling system for industrial continuous applications. Iiodpfxszy U Uae Agyeh Technical data: Manufacturer: Friulair S.r.l. Model: CWE068 Code: CWE068CQ27151 Type of equipment: Industrial chiller Year of manufacture: May 2023 Country of manufacture: Italy Cooling capacity according to the nameplate: 48.5 kW Operating conditions according to the nameplate: Ambient air: 35 °C Water inlet: 12 °C Water outlet: 7 °C Refrigerant circuit: Refrigerant: R410A Filling quantity: 6.0 kg Refrigerant circuit volume: 3.2 liters CO₂ equivalent: 12.53 t GWP: 2088 Max. operating pressure high-pressure side: 41.5 bar Max. operating pressure low-pressure side: 29 bar Temperature range refrigerant circuit: -10 °C to +120 °C Water circuit: Water volume: 200 liters Max. operating pressure: 6 bar Temperature range water circuit: -10 °C to +30 °C Electrical data: Power connection: 3 / 400 V AC ±10 % / 50 Hz Electrical power according to the nameplate: 24.1 kW Current draw: 41.3 A FLA: 47.4 A Fuse rating: 63 A Protection class: IP54 Equipment: Air-cooled chiller Axial fans Integrated refrigerant circuit Integrated water circuit / buffer tank Circulating pump Manometers for high and low pressure Pressure gauge water circuit Main switch Electrical control Hydraulic inlet and outlet connections Closed industrial housing Applications: Industrial cooling Process cooling Machine cooling Test bench cooling Production facilities Machine tools Laser systems Plastics processing Electronics and power electronics testing Research and development Dimensions / Transport: Dimensions (L × W × H): approx. 1,890 × 925 × 1,615 mm Empty weight: approx. 390 kg The transport data is based on the manufacturer's information for the corresponding CWE model size. The actual external dimensions can be checked again before shipment. Condition: Used Year of manufacture 2023 Optical condition according to the pictures. Scope of delivery: 1 x Friulair CWE068 industrial chiller Equipment and connections as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, BT   Model PPS 1200 MX / 1   The BT PPS 1200 MX / 1 is an electrically powered high-lift pallet truck from the manufacturer BT, designed for internal material handling. This model is characterized by its compact design and high maneuverability, making it particularly suitable for use in narrow storage areas, shops, and small production facilities.   Key technical features   Load capacity: 1,200 kg   Iisdpfx Ajziivdjgyoh Lifting height: approx. 2,700 mm   Fork length: approx. 1,150 mm   Drive: 24V electric drive   Battery: 24V   Model from 1999   Operating hours: approx. 356 hours   The pallet truck is still in use, so the actual operating hours may vary slightly at the time of purchase.   Battery renewed in October 2022.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will be happy to answer any further questions you may have over the phone.