Pure air dust extractor

AL-KO Power Unit 250 P - sofort verfügbar

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Podpfx Alozp Edwswsrb Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 950 mm, total width: 970 mm, total height: 2,150 mm, number of chambers: 4, Equipment: CE marking, documentation/manual, Multi-deck oven Wachtel Mini Piccolo 4 TOP electric multi-deck oven with steam injection for 4 trays 600x400mm DMS 2 control system with night start function Exhaust hood with fan Shelf below for 4 trays 600x400 Connection 400V, 2 x 16A CEE plug Dimensions: 970 x 950 x 2150 mm, WxDxH Used oven Prodpfx Asyy R Ufslweb Quality from a specialist company! Benefit from over 35 years of experience! Options: Water filter Pressure reducer Maintenance contract Training and commissioning We have many more ovens in stock!

Condition: new, Year of construction: 2023, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Always in stock, available as left-hand and right-hand models with motorized cleaning. Psdpfeku Aibex Alworb Riedex DM-200 Motor power 4.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible ... - with cell wheel lock (if desired, with a subframe) - with briquetting press etc.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Pedpfx Alsmhhypswsrb - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Predpfxjw Ad Rrs Alwob Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. Pjdpfx Aloulwg Noworb - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: used, functionality: fully functional, operating hours: 3,443 h, CLARK FORKLIFT LOAD CAPACITY: 50 Q. DIESEL NEW FORKS LENGTH: 1.80 MT. ORIGINAL FORKS LENGTH: 1.20 MT. (ALWAYS SUPPLIED) Prsdjwtffxjpfx Alwob NEW SEAT WITH ELBOW REST MAX. LIFTING HEIGHT: 4.80 MT. WORKING HOURS: 3,443 SERVICE CARRIED OUT IN MAY 2025 READY FOR DELIVERY

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Pjdpsy Tm Rpsfx Alworb - Spare milling spindle: included

Condition: excellent (used), Stainless steel tank, 1000 liters Manufacturer: Willi Lermer, Wiesbaden Volume: 1000 liters Stackable 10 units available In very good condition, directly from production!!! Pedpfolbiiasx Alwerb

Condition: new, Year of construction: 2026, Our belt haul-off can be built in different sizes. 40-80 m/min Podpfx Aohd Ndxelwjrb Contact length 170mm to 800mm MADE in GERMANY