Used Abm G80F/3D80B-4 for sale (59,097)

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Kdsdpfezlr Dcsx Af Hst Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Kodpfez Ar R Dsx Af Hedt Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 1990, functionality: limited functionality, turning length: 600 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 270 mm, total length: 5,000 mm, total width: 220 mm, overall weight: 4,000 kg, No. 202 Monforts RNC 4 without tailstock Machine No. 13772 Serial No. 11914 Control: GE Fanuc Tool turret: SAUTER turret ø40 • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck without tools Accessories: Chip conveyor KS Kabelschlepp Year of manufacture: 1990 Item No. 3046 ----- 201 Monforts RNC 4 with tailstock Machine No. 137xx Serial No. 119xx Control: GE Fanuc Monforts Control System F Kdsdpfx Afszypb Us Het SAUTER turret ø 40mm • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck, without tools Accessories: with tailstock Chip conveyor KS Kabelschlepp Year of manufacture: 1990; Item No. 3254 ----- Technical data: RNC 4, RNC series Control: Fanuc 10 T Monforts Control F Max. turning length 600 mm / 1000mm Machine Ø over bed 420 mm Max. swing diameter over cross slide 280 mm Tool turret stations 12 VDI Spindle flange according to DIN 55026 A 6/A 8 Spindle Ø in front bearing 130 mm Material passage through the spindle 65 mm Speed range basic version 5-4000 rpm Tool turret, 12 tool positions: Total power requirement: 22 kW Machine weight approx.: 4 t Space requirement approx.: m The machines have not been in production for several years and were intended to be used as a source of spare parts. The batteries for the control system were replaced regularly. Both machines will be sold as a package. The machine is still connected to the power supply, and the control system starts up without any problems.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s Kdedey Tp E Aepfx Af Hot - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 11,688 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, power: 44 kW (59.82 HP), empty load weight: 4,680 kg, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, lighting, trailer coupling, Linde H30D diesel forklift Year of manufacture: 2003 According to the hour meter: 11,688 operating hours Ksdpszw Dbdsfx Af Hedt 3-ton lifting capacity 2.2-meter overall height 4.6-meter lifting height 44 kW VW engine - Triple-stage free-lift mast - 3rd and 4th valve for fork carriage - Semi-cabin - Radio and heater - Work lights - Immediately ready for operation - Visually like new! Selling price: €9,500 (net) Affordable delivery also possible!

Condition: good (used), geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece Kdsdpfx Afecmkbbo Het -Dimensions: 550/250/H280 mm -Weight: 40 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20326Y00151, Year of construction: 2021, operating hours: 8,186 h, load capacity: 1,400 kg, lifting height: 4,810 mm, free lift: 1,630 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, No minimum price – guaranteed sale to the highest bidder! Note: The sale does not include a charger. TECHNICAL DETAILS Lifting height: 4,810 mm Free lift: 1,630 mm Lifting capacity: 1,400 kg Fork length: 1,190 mm Fork width: 560 mm MACHINE DETAILS Kedpfx Aezza Ubsf Hsdt Mast type: Triplex Drive: Electric Battery manufacturer / type: Kion / BTR-0023V-VL41M-SFP-002M Battery year of manufacture: 2024 Battery voltage: 24 V Battery capacity: 410 Ah Battery tray length: 720 mm Battery tray width: 205 mm Battery tray height: 620 mm Operating hours: 8,186 h Dimensions & Weight Dimensions (L x W x H): 2,200 x 800 x 2,060 mm Overhead height: 2,065 mm Unladen weight: 1,500 kg EQUIPMENT Documentation available CE marking

Condition: good (used), Year of construction: 2010, Engine size : 18,5 Kw Opening : 600 x 1000 mm Number of knives : 28 trapez knives Rotor diameter : Ø 250 mm Rotor length : 600 mm Rotor rpm : 90/min Kjdsz Dn Ufjpfx Af Hodt Siewe holes : Ø 15 mm Dust extraction nozzle : Ø 160 mm Can be examined in working condition, ask for WHATSAPP demo. Mounted with new knives + counter knive Weight : 1300 Kg

Condition: like new (used), functionality: fully functional, Year of construction: 2006, For sale is a Strojstav MPCS 4 dry shotcrete and guniting machine that has never been used and is in like-new condition (Year of manufacture: 2006). This high-performance machine has 0 operating hours and has been stored securely, offering the build quality and performance of a brand-new machine at a highly competitive price. It is designed for transporting and applying dry concrete mixtures and refractory materials. Technical Specifications & Features: Condition: Like new / Never used (0 operating hours) Year of Manufacture: 2006 Ksdpfx Afsz Akvro Hsdt Application Method: Dry shotcrete / guniting (pneumatic dry conveying) Feeding Options: Supports standard bagged materials or large-volume Big-Bags using an auxiliary feeding frame. Mobility & Chassis: Heavy-duty wheels with a front-steered twin-axle system for easy manual positioning on-site. Control System: Integrated, user-friendly control station directly on the machine for safe and precise operation.

Condition: good (used), Year of construction: 2003, functionality: fully functional, color channels: 4, total length: 3,860 mm, total width: 1,470 mm, Equipment: documentation/manual, Plus Version: prepared for numbering & perforating unit Perfecting 2:2 Classic Center Powder sprayer Electronic double sheet detector New rollers VARN Kompac III Kdodoy Efqlopfx Af Hot The Heidelberg GTO 52-4-P3 is a professional four-color small-format offset printing press, renowned for its reliability and precision in commercial job printing. This model features an integrated perfecting system, allowing for double-sided printing of sheets in a single pass. Key Technical Specifications Max. sheet size: 360 x 520 mm (B3 format) Min. sheet size: 105 x 180 mm (one side) / 140 x 180 mm (both sides) Printing speed: Up to 8,000 sheets per hour Substrate thickness: 0.03 mm to 0.4 mm Colors: 4 printing units Plus Version: This machine is designed as a "Plus Version," which includes preparation for additional numbering and perforating units (N+P). Control: Equipped with the Classic Center for central control of ink supply and register.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Kedjzy Npfjpfx Af Hjdt Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 5,000 h, machine/vehicle number: 10000000826, Approx. 7,000 operating hours, approx. 5,000 load hours including: - DMG Mori Slim Line control system - Chip conveyor - Rittal machine cooling system - Lubricant filtration system - Breuning ILS MUK-7012-IV material loader, year of manufacture 12/2023 The machine is available for purchase via an online auction on our website. You can access the website by clicking on the link in the advertisement. Kdjdpfez Dv Dzjx Af Hjt

Condition: new, power capacity / kW volt 230/400 V Ksdpfx Afezcggbe Hjdt ampere 3,6/2,1 A total power requirement 0,75 kW

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords Ksdszlqzgopfx Af Hedt - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder Kedpjzlqwzofx Af Hjdt - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: excellent (used), Year of construction: 1998, S015278 Kdsdpfx Afoz Dul Rs Hjt PRODUCER: KAESER TYPE: AS44 SERIAL NO.: 1010 YEAR: 1998 POWER (kW): 30 CAPACITY (m3/min): 4.35 PRESSURE (bar): 7.5 HOURS (RUNNING/TOTAL): 83296 FREQUENCY CONVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLED BY (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 1 NEW/USED: USED

Condition: used, Year of construction: 1993, functionality: fully functional, total height: 2,200 mm, total width: 2,500 mm, total length: 2,800 mm, type of input current: AC, overall weight: 4,500 kg, input voltage: 380 V, nominal power: 38 kW (51.67 HP), NOMOCO VSRS-280 CNC 4 – Centerless CNC cylindrical grinding machine We are offering a NOMOCO VSRS-280 CNC 4 centerless cylindrical grinding machine, manufactured in 1993, in very good condition and fully functional, for sale. The machine is currently in operation and can be inspected on-site after prior appointment. This provides the opportunity to directly verify the machine's function and current technical condition. Kedpsyr Sh Aofx Af Hedt The Siemens CNC control system, as well as the CNC-controlled X, Y, Z, and C axes, enable precise and reproducible machining. The machine is particularly suitable for industrial applications where a reliable and economical solution for centerless cylindrical grinding is required. Technical Highlights Manufacturer: NOMOCO Model: VSRS-280 CNC 4 Year of manufacture: 1993 Machine type: CNC cylindrical grinding machine, centerless Control system: Siemens CNC-controlled axes: X / Y / Z / C Condition: Used, very well-maintained overall condition Availability: Immediately Inspection: Possible by appointment Machine currently in operation Axis configuration Axis Function X-axis Infeed slide Y-axis Truing spindle S Z-axis Truing slide S C-axis Support U-axis Support R W-axis Truing slide R Dimensions & Weight Overall length: approx. 2,800 mm Overall width: approx. 2,500 mm Overall height: approx. 2,200 mm Weight: approx. 4,500 kg Electrical connection data Operating voltage: 380 VAC / 50 Hz Rated current: 100 A Connected power: 38 kW Condition & Inspection The NOMOCO VSRS-280 CNC 4 is currently in operation. The overall condition is considered to be very good for its year of manufacture. An on-site inspection and functional test are possible after prior appointment. Availability: immediately If you are interested, have technical questions, or would like further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2020, includes accessories Working width 950 mm 4-position tool changer, side-mounted Location: Nattheim Kedpfx Afjzn N Iqe Hedt

Condition: used, Gear motor, electric motor -Speed: 20/40 rpm -Power: 0.18/0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Length: 253 mm -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: 610/200/H175 mm -Weight: 15.4 kg Kjdpsc U Tx Rsfx Af Hedt

Condition: used, Year of construction: 1991, machine/vehicle number: 15453 91, functionality: unexamined, Vertical metal bandsaw, Heska SB 4, manufactured in 1991. Machine no. 15453 91, band length 3,200 to 3,400 mm. Band welding device with shear on the stand, height-adjustable upper band guide with protection. Cutting data selector dial, work light, work table with groove profile. Kdodpfx Ajz A Umxjf Hot Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 Kdedpfscmkbcjx Af Hjt -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Kedpfsz Ar Ucsx Af Hjdt Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Gear motor, electric motor, three-phase motor Kjdpfx Aoc Uv Nmef Hjdt -Speed: 31.5/63 rpm -Power: 0.25/0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44/55 -Price: per piece -Number: 2x available -Dimensions: 405/190/H160 mm -Weight: 17 kg

Condition: used, Year of construction: 2021, power: 4.9 kW (6.66 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 250 mm, actuation type: manual, rotational speed (max.): 5,300 rpm, Equipment: CE marking, saw blade guard, Format4 Kappa V60 vertical panel saw by Felder, purchased on May 26, 2021, for precise cutting of panel materials in the woodworking shop. Suitable for large-format wood, wood-based materials, and coated panels with minimal space requirements. Key technical data: Kdodpfezulpqjx Af Het - Cutting depth: Maximum 60 mm - Cutting height: 2200 mm vertically - Cutting length: 5300 mm - Motor power: approx. 4.9 kW - Saw blade: Ø 250 mm at 5300 rpm - Dust extraction: 2x 100 mm connections - Weight: approx. 910 kg, depending on the model - Vertical design for space-saving cutting of large panels - Precise horizontal and vertical cuts for panel materials - Particularly interesting for carpentry shops, makerspaces, training workshops, and companies with regular panel cutting needs No warranty

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: Kjdoy Ri Huepfx Af Hodt - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)