Used All Mecanic Multifunctional Punch for sale (24,819)

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor Lasdpeznlbajfx An Isd - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Year of construction: 2018, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: 441, punching force: 28 t, total height: 2,020 mm, total width: 4,118 mm, total length: 4,042 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 8,400 kg, table width: 1,250 mm, table length: 2,000 mm, input current: 35 A, input frequency: 50 Hz, power of the servo motor: 3,700 W, feed rate X-axis: 120 m/min, feed rate Y-axis: 75 m/min, space requirement width: 4,100 mm, space requirement length: 4,600 mm, space requirement height: 2,200 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,250 mm, positioning speed: 60 m/min, construction width: 4,118 mm, tool length: 30 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.025 mm, Equipment: safety light barrier, The Boschert Compact 1250 rotation machine is fully operational. Please contact us to arrange a viewing. Laodpfx Anoww U T He Iod

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables Laodpfszhu I Aox An Isd - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 1980, pressure 25 t Laedpovu E Iqefx An Ied no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: excellent (used), Year of construction: 1985, pressure 25 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : MABU (D) High Speed 4 Column Automatic Punching Press model 25 VP / RC year 1985 Press force nominal 25 to Punching Speeds 120 - 600 strokes/min Stroke length adjustable 7 - 62 mm Ram adjustment range 50 mm Mounting height 225 - 310 mm Table size 560 x 640 mm Distance between columns sides 320 / 340 mm Distance between columns front/back 380 / 400 mm Opening in table / clamping plate 120 x 230 mm Ram clamping plate size 240 x 280 mm MABU Strip feed RACER 11 Max. strip width 150 mm Max. feed stroke 120 mm Main drive approx. 3 kW Total drive approx. 3,5 kW - 380 V - 50 Hz Weight approx. 2.400 kg Accessories / Special Features: • MABU Strip feed device model RACER 11 RCTF, mounted on the left side, stroke adjustable, infeed height adjustable, • Automatic continuous stroke and single stroke available as well as inching mode, piece counter, blow out device • Sep. control cabinet and switch cabinet, Vibration dampening machine shoes • Large, soundproof cabin (disassembled) • Various accessories, manuals and former safety test reports Lodozbu Spepfx An Iead Condition : very good, press was regularly maintained ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of all kinds of presses available. Please let us know your requirements.

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm sheet width 40 mm Lodpoxzk I Sjfx An Iead

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Laedpfx Anovu E Iwe Ijd total power requirement 5,5 kW

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Ljdpfevu E I Dsx An Iead

Condition: used, Year of construction: 1978, pressure 160 t Laedpfot Hwz Nex An Ied no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. Lsdpjv I S T Tsfx An Ijad This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Laodev I Tuxopfx An Ied Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Year of construction: 2025, condition: new, ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with a hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in a single, compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Lajdpev I S U Refx An Isd Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING Lsdezmx Scepfx An Ioad No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, workpiece weight (max.): 200 kg, working width: 3,080 mm, working length: 1,560 mm, The following parts of the machine have been renewed: Festo pneumatic system Brand new Labod control system Laedpfxszl Sraj An Iod Replacement of the Y-axis bearings TECHNICAL DETAILS Working area: 1,560 × 3,080 mm Sheet metal length through repositioning: max. 9,999 mm Hydraulic punching force: max. 280 kN Workpiece weight: max. 200 kg Positioning speed of the X-axis: max. 60 m/min Positioning speed of the Y-axis: max. 60 m/min Simultaneous positioning speed of the X and Y axes: max. 85 m/min Stroke rate with standard hydraulics: max. 250 strokes/min Stroke rate with quick hydraulics: max. 800 strokes/min Note: The machine has already been disassembled.

Condition: used, Year of construction: 2007, Control system, manufacturer: Boschert; quick-change tool system, manufacturer: Trumpf; punching force: 3 x 280 kN; Station 1: Trumpf system tool, size 3 (105 mm) with spray device; Station 2: Trumpf system tool, size 3 (105 mm), free-rotating and indexable; Station 3: Trumpf system tool/Boschert Revotool, size 3 (105 mm), including Revotool 8-position tool holder; travel distances: X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm; punching arm overhang: 1,730 mm; sheet metal thickness max.: 6 mm (clamp opening); stroke height max.: 90 mm, programmable in infinitely variable steps upwards and downwards; punching slug extraction; ball bearings in the machine table; table width left + right: 3,200 mm each; table depth: 2,810 mm; table height: 900 mm; overall width: 6,482 mm; overall depth: 4,600 mm; overall height: 2,110 mm; with workshop trolley, manufacturer: KS Tools, 7 drawers, contents: various hand tools. Laodpfjzkah Tsx An Ijd +++ ATTENTION: This machine is part of an online auction! +++

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: B698, overall weight: 6,000 kg, total height: 1,800 mm, total length: 5,000 mm, total width: 2,000 mm, IMCAR SIHR 8/5 Three-Roll Bending Machine Ljdpozkhznofx An Ioad - Bending length: approx. 3100 mm - Roller thickness: approx. 250 mm Note: The item must be collected between September 15 and September 17, 2026, on a date to be determined. FCA D-76474 Au am Rhein - loaded onto a truck.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 600 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, L=360cm Laodpfx Asyf Nk Ien Ied W=60cm H=100cm

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Ledpfxjznhwdj An Ioad Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set Laodezil Dkopfx An Isd

Condition: used, Year of construction: 1998, functionality: fully functional, Punching force: 165 kN Ledjzilz Aepfx An Ijad Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: new, functionality: fully functional, Thick turret punch tool for Amada, Lvd, Finn-power, Euromac, Yawei, JFY Original style punch compatiable for Amada/Mate guide holder Quick adjustable style compatiable for Mate/Wilson 90 guide holder Standard shape as Round, rectangle, Square, Ob-long, triangle Lodpfx Anjiq Di As Ijad Special shape, emboss tool, countersink tool, lance & form tool, bridge tool, louvre tool, blank out tool, dimple tool, etc.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf Ledpsyzpf Eofx An Iead 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened

Condition: good (used), functionality: fully functional, Weight: 3.5 tons Punching force: 1000 kN Reach: 760 mm Laedpfezmp I Iex An Ijd Can punch, for example, a 40 mm hole in 22 mm steel Drive power: 8.5 kW Height (approx.): 2.15 m Width x Depth (approx.): 0.8 x 2 m Stroke release via foot switch.

Condition: used, pressure 40 t Lodpjyv Nuiofx An Ioad throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Lajdezil Trjpfx An Ied Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure