Used Bornemann for sale (10)

Condition: used, functionality: fully functional, machine/vehicle number: ., 2 Bornemann pumps 6 inch / 4 inch. Removed in working condition from a bunker barge. Dcsdpfsy Ipyvox Aa Njg

Condition: used, Year of construction: 2010, machine/vehicle number: 106547, volume flow: 182 m³/h, operating pressure: 10 bar, power: 87 kW (118.29 HP), rotational speed (max.): 1,315 rpm, Bornemann pumps, type HC 180-68, 10 bar pressure, 182.6 m³/h. Fitted with ABB motors, type M3KP315, 132 kW, 232 A. Good condition, 4 units available. All pumps in stock can be viewed in the catalogue. Dodpfevwmpbex Aa Necg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 803412, volume flow: 896 m³/h, operating pressure: 4 bar, Screw pump based on ABB motor 250 kW, 455A, 1486 rpm, Bornemann pump W8.4ZK-144, 4.5 bar, 896 m3/h. Used for transferring fuel oil at a fuel terminal. All pumps currently available can be viewed in the catalogue. Dcsdjvvlrrjpfx Aa Neg

Condition: used, machine/vehicle number: 800509, volume flow: 290 m³/h, operating pressure: 6 bar, final pressure: 6 bar, power: 135 kW (183.55 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 243 A, protection type (IP code): IP54, Bornemann pump, type W7T.2Z-85, 6 bar, 290 m³/h, year 1997, electric motor BrookHansen, 135 kW, 243A, 1480 rpm. In working condition. All available pumps can be found in the catalogue. Dsdpfx Aovwlkkea Nocg

Condition: excellent (used), Year of construction: 1996, Description follows Dcsdpfx Aexzk Ncja Nsg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Dcsdpfsxvx U Aex Aa Nog Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the control system was completely renewed for approximately €40,000! Dcsdpfsw N Nnbsx Aa Nog TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control unit: Fidia CXR with handwheel – new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: hollow milling spindle with 78/8 flange and locknut Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet chuck Tool release: manual Note: For approx. €10,000, a spindle upgrade kit can be retrofitted (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) A new 6-position tool changer can also be purchased in combination with the spindle upgrade (approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Installation space required: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Dcodpfxjxr U Dre Aa Njg Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Year of construction: 1993, condition: used, Offer in progress! Dedpfjwftursx Aa Nscg

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Table with vacuum plate Dcodpfxeq Rcu Es Aa Neg with BORNEMANN 960 suction unit