Used Automatic Welding System for sale (50,944)

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Knedpfx Aksu S Tfgolea Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, Welding turntable – welding rotating device with enclosure Circular welding device Knsdpfxsdzp U Is Aklsa Load capacity approx. 50 kg Turntable diameter 300 mm Turntable speed 1.0-15 rpm Mains connection 230 volts, 50 Hz - Plan spiral turntable with internally stepped jaws - Infinitely variable speed control via potentiometer - Drive via geared motor, rotation direction: left - Start via electrical switch - Welding current transfer via sliding contact - Extraction port Ø 160 mm - Interior lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Space required W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic Ksdjpy Uzyepfx Aklona - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 12-Week Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It offers the possibility of processing up to 8 different chemicals in tanks with varying numbers, depending on the process. All tanks are made of 316 SS and are insulated. The number of tanks and the number of heated tanks are determined according to the process steps. ✅The heating in the tank is done via gas heat exchangers. The processes can be monitored, and the times and temperatures of all processes can be set via the PLC touchscreen. ✅Any errors that occur in the system can be observed on the control panel. Automatic floats are located in the tanks; the system automatically stops if there is not enough water or chemicals in the tanks, and the liquid level is automatically replenished by transferring liquid between the tanks, ensuring the system remains safe. Kodpfx Aefggcwjkljna ✅There is a drain basin under all tanks. The drain basin is made of 316 SS. The tanks are made of 2 mm stainless steel 316. The material undergoes penetration testing and is argon-welded and sealed. The grates in the tank prevent dirt from entering the pumps. The interior of the cabinet consists of sandwich panels made of stainless steel 304, and the exterior is made of powder-coated sheet metal. ✅The panel thickness is 80 mm. It consists of stainless steel panels filled with polyurethane. PPT ring pipes and nozzles offer a long service life. ✅Thanks to the steam extraction fan, steam diffusion from the system into the work area is prevented. The washing system doors are container-like and sealed with silicone seals. The movable washing platform in the cabinet moves back and forth through the cabinet to wash the materials. The hoses are supported by the mobile carrier system. There are separate pumps for each process and a drain pump for draining liquids from the tanks. The drain pump is connected to the chemical drain tank. ✅There are manual application guns for manual application for each process. The system has a manual mode for pretreatment. The drain time and process time can be set via the PLC control panel. The drain time applies to manual application.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: Knjdpfx Akjx Da Tijlea • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Year of construction: 1988, condition: used, Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. Kjdpfx Ashitxdekljna More Bihler and Bruderer machines on stock.

Year of construction: 1988, condition: used, Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Knsdshit E Dspfx Aklea Made in Germany. More Bihler and Bruderer machines on stock.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Knedpfx Asrumymsklsa A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system Knodpfx Asthigroklea - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm Kedpjthit Ejfx Aklona - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, The machine is not in use anymore and therefore its for sale. It has 20h of welding and it has been 596h turned on. It is as new, as can be seen on pictures. Location of the machine is in KFK, Croatia and here it can be seen. For more information and price contact us. Knodpfowwt S Ujx Aklja

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. Knodpfov Iq Tljx Aklea The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Basic data: Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) Kedpfxjwm I H So Aklona 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Year of construction: 2020, condition: like new (used), With automatic feeding and removal. Workpieces are fed in as bulk material, inspected, and defective parts are sorted out. Good parts are then transferred as bulk material into containers. Workpiece: Bolts, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - High-resolution matrix camera (21 Mp), dimension measurement - Line scan camera (4K), surface inspection Parts hopper SKAKO, 71 l volume Capacity: up to 125 kg New price: €230,000 Kjdpfx Aelpcm Rjklena

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide Knedjxlb E Aspfx Aklsa - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks - various

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Ksdpfokwct Uex Aklsna Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine Knodsu Sqqiopfx Aklsa TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Knsdpfxsxhquxs Aklea Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Knodox Rz I Dopfx Aklsa Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet Knjdpew Tkt Hofx Akloa S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet

Year of construction: 2002, condition: good (used), Machine type: Laser welding system Manufacturer: Arnold Factory number: 20435 DCS Year of manufacture: 2002 Available from January 2027 Kjdpfx Askv Upijklona Available at the current location for self-dismantling. Optionally, we can offer dismantling and loading services.

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Knsdokv Untspfx Aklja Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day

Condition: used, Föhrenbach Laser Welding System Kodpfjxbcwxjx Aklona Furthermore, I would like to inform you that the laser has been stored for shipping in 2 wooden crates. Data sheets are available as PDF files. Complete data package (4 folders). As previously mentioned, since this is a "custom machine," there are no off-the-shelf solutions here.

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm; length of sealing blades: horizontal = 623mm, vertical = 550mm; power: 220V/2.8kW; machine dimensions: L1850xW1350xH1300mm; weight: 800kg. - Specifications of the shrink tunnel: high speed shrinking with 0-20m/min for POF (Polyolefin) film; max. packaging size: W400xH250; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions: L1800xW990xH1300mm; weight: 650kg. Dimensions of infeed and outfeed conveyors: L1000mmxW450mm each. Total dimensions LxWxH: approx. 5650x1350x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ksdpfx Ajv Nl A Rjkljna

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W550xH250; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions: L1800xW1140xH1300mm; weight: 700kg. Dimensions of infeed and outfeed conveyors: L1000mmxW600mm each. Total dimensions LxWxH: approx. 5815x1470x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kjdpfxjv Nl Dbj Akljna