Used Class F1 5G Weight for sale (67,298)

Condition: used, functionality: fully functional, machine/vehicle number: 515xxxxxxxx, Year of construction: 1998, operating hours: 58,791 h, load capacity: 1,000 kg, lifting height: 3,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, fork length: 1,000 mm, empty load weight: 1,545 kg, total length: 1,611 mm, drive type: Elektro, construction width: 980 mm, Electric three-wheel forklift Hodpfx Afozif R Retofl Chassis number: 515xxxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Impulse Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery type: PzS Description: The unit is operational but is sold as is, as received from the customer. The unit has defects and is sold without any warranty/guarantee. The forklift has NOT been refurbished and has NOT been inspected according to UVV regulations. Sale only to dealers! Impulse control, full free lift, hydraulic steering, hour meter, discharge indicator, 24-volt battery (year of manufacture, Ah, and weight unknown), external charger included.

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 Hfedpszy Sqfefx Aftjl 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: like new (used), Complete surplus lot of approximately 70 unused industrial valves, packed in 5 wooden crates and on 7 pallets. Gross weight approx. 7,900 kg, net weight approx. 7,220 kg. Hedpfszz Hc Sox Aftjfl The lot consists of various high-pressure plug valves, ball valves, choke valves, instrument/control valve assemblies and other manual industrial valves from reputable European manufacturers including Brdr. Christensen, P. Della Foglia, Mokveld, Vonk Chokes / Pentair and HP Valves. Sizes and pressure ratings vary, including heavy-duty executions up to ASME Class 2500 and API 10,000 psi, with materials including ASTM A352 LCC, A182 F316L, F6NM, CA6NM, Duplex F51 and Inconel 718. All equipment is new / unused surplus stock. Part of the original documentation and certificates is available.

Condition: used, This listing is for 1 of 2 VWR 2KG Weight. The unit is in full working condition and is ready for immediate release. The VWR® Calibration Weights are meticulously crafted from high-grade stainless steel to ensure long-lasting durability and reliable performance. Designed for use in various precision weighing applications, these weights are ideal for laboratory, industrial, and calibration purposes. They feature a cylindrical shape with a knob for easy handling and come in OIML Class E2, F1, or F2 options to meet diverse accuracy requirements. Each weight comes in a protective plastic storage case, ensuring safe storage and handling. For quality assurance, you have the option to include a Statement of Accuracy or an ISO 17025:2017 Certificate of Calibration. The ISO certification guarantees full traceability, providing critical information such as the date of manufacture, serial number, nominal mass, conventional mass, and uncertainty of measurement. Key Features: High-Grade Stainless Steel Construction: Ensures long-lasting durability and resistance to wear and corrosion. Plastic Storage Case: Provides secure and safe storage for each calibration weight. OIML Classification: Available in E2, F1, or F2 classes, offering precision options for various applications. Cylindrical Shape with Knob: Ergonomically designed for easy handling. High Polish Finish: Offers a smooth, polished surface and low magnetic permeability for precision applications. Hedoxx Ab Eepfx Aftefl Optional Certification: Available with either a Statement of Accuracy or an ISO 17025:2017 Certificate of Calibration, ensuring traceable calibration and compliance with industry standards.

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site. Hfodpszrh D Ssfx Aftol

Condition: good (used), Year of construction: 2005, Yaskawa Motoman YR-HP3L-A00 3kg 6-axis industrial robot arm with SCHUNK PGN 64-1 gripper for sale (controller not included) For sale: a used Yaskawa Motoman YR-HP3L-A00 6-axis industrial robot arm equipped with a SCHUNK PGN 64-1 pneumatic parallel gripper; controller not included. Manufacturer: Yaskawa Electric Corporation / Motoman Model: YR-HP3L-A00 Design: Articulated industrial robot Number of controlled axes: 6 Maximum payload: 3 kg Hsdsz Ahvispfx Aftofl Maximum horizontal reach: 859 mm Maximum vertical reach: 1469 mm Repeatability: ±0.04 mm Robot arm weight: 49 kg Compatible control system: Yaskawa Motoman NX100 Manufacturing date: April 2005 Place of manufacture: Japan SCHUNK PGN 64-1 gripper: Design: Two-finger pneumatic parallel gripper Manufacturer ID: 371090 Stroke per finger: 6 mm Total gripping stroke: 12 mm Closing force: 220 N Opening force: 255 N Nominal operating pressure: 6 bar Permissible operating pressure: 2–8 bar Repeatability: 0.01 mm Weight: 0.27 kg Maximum workpiece weight recommended by manufacturer: 1.25 kg Maximum permissible ambient temperature: 90 °C Protection class: IP40 Applications: Gripping and moving small parts Pick-and-place operations Machine tending Assembly Dispensing and sorting Packaging tasks The robot arm's maximum payload of 3 kg includes the weight of the wrist-mounted gripper and the custom gripper fingers. The robot is sold without a control unit or teach pendant. Commissioning requires a compatible Yaskawa Motoman NX100 control system, as well as professional installation and programming. Used equipment, in the condition shown in the photos.

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) - Cooling: forced air – no external chiller required - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. Hfedpfx Aszw U T Reftol COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: like new (used), Year of construction: 2023, operating hours: 111 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 4,000 kg, The PS1600 was designed for shredding pallets into high-quality wood chips. - Recycling of pallets into high-quality wood chips - Significant space saving by eliminating the need for disposal sites - No disposal costs - Simple and safe operation Details Technical data Machine type: PS1600 Operating hours: 111 h Year of manufacture: 03/2023 Cutting unit opening: 284 x 1,588 mm Drive description: Belt drive with a 2-stage gearbox and elastomer damper Drive power: 22 kW Rotor speed: 53 rpm Energy efficiency class: IE3 Voltage / frequency: 400 V / 50 Hz Cutting system: Rotor Feed table with infeed belt and infeed roller Speed control of the infeed rollers Design: Smooth Rotor diameter: 300 mm Number of knife rows: 1 Number of cutting tools: 43 Perforated screen: 70 x 40 mm with chip breaker Color / paint Machine: Gray Covers: Gold yellow Control cabinet Control: Siemens LOGO control Color: Light gray Dimensions and weight Machine dimensions: l x w x h 4660 x 2320 x 2030 mm Total weight: 4 t Accessories Discharge screw: 3000 mm Trough chain conveyor 45°: 4000 mm Hodpfozntu Uex Aftofl Downpipe: 1000 mm Light barrier in the chip area OPTIONAL on request: Magnetic separator

Condition: excellent (used), Year of construction: 2023, Friulair CWE068 industrial chiller, manufactured in May 2023. For sale is a used, air-cooled industrial chiller from the manufacturer Friulair. The CWE series has been developed for industrial process and machine cooling as well as reliable continuous operation. Technical data: Manufacturer: Friulair S.r.l. Model: CWE068 Code: CWE068CQ27151 Year of manufacture: May 2023 Rated cooling capacity according to nameplate: 48.5 kW Operating conditions: Ambient air: 35 °C Water inlet: 12 °C Water outlet: 7 °C Refrigerant: R410A Filling quantity: 6.0 kg Refrigerant circuit: 3.2 liters CO₂ equivalent: 12.53 t GWP: 2088 Max. pressure HP: 41.5 bar Max. pressure LP: 29 bar Water circuit: Volume: 200 liters Max. operating pressure: 6 bar Temperature range: -10 °C to +30 °C Electrical data: 3 / 400 V AC ±10 % / 50 Hz Power: 24.1 kW Current consumption: 41.3 A FLA: 47.4 A Fuse: 63 A Protection class: IP54 Equipment: Air-cooled chiller with axial fans, integrated refrigerant and water circuit, Hodezy U Uaspfx Aftofl buffer tank, circulation pump, high/low pressure gauges, water pressure gauge, main switch, as well as hydraulic inlet and outlet connections. Transport data: Dimensions (L × W × H): approx. 1,890 × 925 × 1,615 mm Weight: approx. 390 kg Condition: Used, manufactured in 2023. Optical condition as shown in the pictures. Scope of delivery: 1 x Friulair CWE068 chiller Equipment and connections as shown in the pictures. Shipping via freight forwarder possible. Subject to changes, errors and prior sale.

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Hfedev R Dlyopfx Aftsl Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Condition: used, Year of construction: 2013, operating hours: 11,082 h, Boom type: Monoblock boom Fuel pump: Yes Hfsdpfx Afozx Ntujtsl Ground plate width in mm: 500 Service weight: 72400 Emission class: Emission class 3A EPA marking: Yes Complete cabin protection: Yes Air conditioning: Yes Stick length: 2600 Machine width in mm: 4200 Engine: Liebherr D 9508 Bulletproof glass: Yes Rear view monitoring with camera: Yes Additional extras: Cabin extension 800 mm, lifting cylinder with piston rod Central lubrication system: Yes Condition of left track in %: 90 Condition of right track in %: 90 Condition of track roller in %: 80 Condition of undercarriage in %: 90 Condition of idler in %: 80 Visual condition: clearly used - 4 Condition of support wheel in %: 50 Technical condition: in need of repair - 4 Condition of undercarriage frame in %: 90 ---- Air conditioning Machine width: 4200 mm Cabin extension 800 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, HANDTMANN HVF 658 | High Vacuum Filler with Loading Hopper Manufacturer: Handtmann Model / Type: HVF 658 Serial number: 31921 Year of manufacture: 2012 Power supply: 400 V | 50 Hz | 3 phases Current: 26 A Power: 18 kW Dimensions: 1660 x 1600 x 2400 mm Loading hopper dimensions: 1900 x 1550 x 2000 mm Vacuum pump: Hfedpfxjzgxhdj Aftjl Brand: Busch Type: KB 0040 D IZO Serial number: CZM123380806 Vacuum pump capacity: 48 m³/h Filling pressure: up to 72 bar The Handtmann HVF 658 industrial high-vacuum filler is a top-class, specialized portioning and filling machine designed for continuous operation in large meat processing plants, slaughterhouses, and factories producing snack sausages, dry sausages, salami, and meat snacks. The unique high-vacuum technology eliminates almost 100% of micro-air bubbles and oxygen from the filling, which directly translates into a compact structure of the finished product, excellent consistency in weight, reduced maturation and drying time, and a significant extension of the product's shelf life. The heart of the machine is a precise paddle feeding mechanism correlated with a powerful suction system of a Busch vacuum pump with a capacity of 48 m³/h. Thanks to the filling pressure of up to 72 bar, the HVF 658 model perfectly handles very dense, hard, heavily frozen, and demanding fillings. The design with an external, automated loading hopper and level sensors ensures smooth, continuous operation without technological downtime for traditional chamber filling.

Year of construction: 2017, condition: ready for operation (used), laser power: 600 W, Automation system manufactured in 2017. This CLEANLASER CL 600 features a laser wavelength of 1064 nm. With 3 units available, this system is designed for precision applications. If you are looking to get high-quality automation capabilities, consider the CLEANLASER CL 600 machine we have for sale. Contact us for further details. Hedpfjz Aq Hqex Aftefl - 3 units available- Main Laser System Model: CL 600- Laser Power (max. av.): 600 W- Wavelength: 1064 nm- Pulse Frequency: 20-40 kHz- Pulse Duration (min.): 45 ns- Pulse Energy (max.): 33 mJ- Laser Safety Class: Class IV Laser Product- Main System Power Supply: 3x400 VAC, N, PE- Main System Frequency: 50 Hz / 50/60 Hz (correspond to separate units)- Main System Power Consumption: 10 kVA- Optic System Model: intelliSCAN 30- Optic Wavelength: 1064 nm- Optic Work Distance: 250 mm- Hydraulic Pump Drive Motor Brand: Leroy-Somer- Hydraulic Pump Drive Motor Weight: 490 kg- Hydraulic Pump Drive Motor Output: 90 kW (50 Hz, 1460 min-1) / 103 kW (60 Hz, 1780 min-1)- Hydraulic Pump Drive Motor Voltage / Connection: A380V / A400V / Y690V (50 Hz), A415V / A440V / A460V (60 Hz)- Hydraulic Pump Drive Motor Rated Current: 170A / 162A / 94A (50 Hz), 159A / 168A / 161A (60 Hz)- Hydraulic Pump Drive Motor Protection Class: IP 55- Hydraulic Pump Drive Motor Max Ambient Temperature: 40 °C- Hydraulic Pump Brand: Brueninghaus Hydromatik GmbH (The Rexroth Corp.)- Hydraulic Pump Displacement (Vg): 125 cc- Hydraulic Pump Nominal Speed (n): 1800 rpm- Hydraulic Pump Pressure (DR): 276 bar- Hydraulic Pump Fluid Type: mineraloil- Package sale possible (, )

Year of construction: 2020, condition: good (used), Lode Valiant 2 Sport Treadmill (2021/2022) – Lightly used in a clinical research setting – Includes a 1-month warranty. Smooth start at 0.0 km/h with precise control from 1.0–25.0 km/h in 0.1 km/h increments. The low-profile front cover leaves the athlete’s stride unobstructed and provides space for a mirror or camera at the front for real-time technique monitoring. Generous running deck: 70 × 190 cm standard; incline 0–25% for versatile protocols. XL option: 80 × 200 cm deck for larger subjects or high-speed work. Use cases: Sports medicine labs, CPET/stress testing, gait analysis, and high-performance training, where fine speed control and seamless device integration are essential. Also included: Hfsdpfx Afszhicuetel A comprehensive set of safety and usability features designed for continuous clinical use. Speed: Max: 25 km/h (15.5 mph) Min (operational): 1.0 km/h (0.6 mph) Adjustment step: 0.1 km/h (0.1 mph) Incline: Positive incline: 0–25% Adjustment step: 0.5% Optional decline: down to −10% (with accessory) Accuracy: Speed accuracy: ±5% Incline accuracy: ±0.5% Comfort / Capacity: Max user weight: 225 kg (496 lb) Certification: CE class Im (MDD 93/42/EEC) With optional SpO₂: CE class IIa With optional BPM: CE class IIa IECEE CB: certified

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2014, next inspection (TÜV): 01/2027, loading space length: 13,630 mm, loading space width: 2,580 mm, loading space height: 2,730 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 7,330 mm, Equipment: ABS, KRONE SD – PR. + PL. – SAF – 2X PALLET LOADS – VEHICLE HISTORY Hjdpfx Afszz Edzjtsfl * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data: Make/Model: KRONE SD DA06CLNF (Semi-trailer, Side Curtainsider) * First Registration: 09/2014 * Vehicle Class: O4 (Trailer > 10 t) Dimensions: Internal Dimensions: 13.63 m (L) x 2.58 m (W) x 2.73 m (H) * External Dimensions: 13.86 m (L) x 2.55 m (W) x 4.00 m (H) Weights: Permissible Total Weight: 39,000 kg (technical) / 36,000 kg (approved, Germany) * Unladen Weight: 7,330 kg * Payload: approx. 28,670 kg * Support Load: 12,000 kg Axles & Brakes: 3 Axles, SAF Axles * Air Suspension * Disc Brakes * Axle Load: 3 x 9,000 kg (technical) / 3 x 8,000 kg (approved) Tires: 385/65 R22.5 160J (all axles) Equipment: Spare wheel holder * Storage box * Pallet box 2x on both sides Approval & Inspection: Next MOT: 01/2027 * EC Type Approval: e12007/460232 EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors, and prior sale are subject to change! You can find more vehicles on our website. Sale is exclusively subject to our general terms and conditions – see homepage. Important Note – Important Information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 Hodpfx Afoz Aplletefl MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg Hjdpfx Aevuhumsftefl The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg Hfsdevvha Sjpfx Aftel - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Condition: used, Year of construction: 2009, Transformer Manufacturer: SGB Type: DOTUL 400 H/20 Year of manufacture: 2009 Rated power: 400 kVA Rated current: 550 A Voltage ratio: 24.0/1.1 kV Rated frequency: 50 Hz Protection class: IP54, suitable for operation in DB (Deutsche Bahn – German Railways) Vector group: Dyn 5 Cooling: ONAN Insulating fluid: Nytro 4000X Oil quantity to be drained at +20°C: 3.8 l Total weight: 1,600 kg Oil weight: 0.300 kg Hsdpfxez Atgaj Aftjfl 15926ä

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Hedszzvgaspfx Aftefl Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine with extensive accessories! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine/fixture drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.00. It is worth noting that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, where the highest precision is required. It is also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Hfsdpfx Afszuvwlstsl Payment for the machine, as is customary with used machines, is made in full before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without transshipment) within the EU is possible. Price net export within the EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc., up to 1700 km travel distance, approx. 1100 - 1450 EUR.

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Hodpfx Afezxtz Netofl Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 15 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Hjdpfx Afjxwb Rpotsfl Technical specifications Type: Combi XP 15 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g) : 0.48 to 2.32 m³/min at 8 bar (g) : 0.45 to 2.23 m³/min at 9 bar (g) : 0.45 to 2.12 m³/min at 10 bar (g) : 0.45 to 2.02 m³/min at 11 bar (g) : 0.45 to 1.90 m³/min at 12 bar (g) : 0.44 to 1.80 m³/min at 13 bar (g) : 0.43 to 1.69 m³/min Nominal power drive motor: 15 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400V/85-400 Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 410 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2017, condition: used, General information Mileage: 99.451 km Field of application: Grounds care Technical information Power: 110 kW (150 HP) Type of fuel: Diesel Weights Empty weight: 1.600 kg Carrying capacity: 2.145 kg GVW: 3.745 kg Environment Emission class: Euro 6 Condition General condition: good Technical condition: good Visual appearance: good Additional information Please contact Christian Theißen for more information Manufacturer: Audi Model: Audi A4 Avant / emergency vehicle hatchback Year of build: 2017 Condition: Used Data: First registration: 07/2017 Fuel type: Diesel Mileage: 99.451 KM Gear type: Automatic Engine power/displacement: 110kW / 1968 cm³ Total permissible weight: 2.145 kg Empty weight: 1.600 kg Length: 4726 mm Width: 1842 mm Height: 1393 mm Environment badge: Green / Euro 6 Colour: white Equipment: Automatic front flashers, automatic air-conditioning, seats: 5, airbag, power window and power side-view mirrors, central locking system, ABS, ESC, radio, power steering Hfjdpfx Afezh Uyxstsl Information: Equipment set-up: detachable emergency light and siren, hands-free system for mobile phones Location: 41468 Neuss immediately available

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Hjdpfjy D Hfzsx Aftjfl Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.