Used Thread rolling machines for sale (45)

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D Isdpfx Aajw E Nmkoboih taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Felsomat loader cell Complete housing

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO. Iijdpfoxm Stgex Aabeh

Condition: excellent (used), ORT RP 18B Thread Rolling Machine MACHINE DISCONNECTED, SOLD AS IS WITHOUT WARRANTY Iedpfexfk Umsx Aabeih

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, Type: Thread rolling machine – Gewinderollmaschine Manufacturer: Thommen – Made in Switzerland Model: RT 70 RCA Year of manufacture: 2004 Bosch control unit Comparable to Profiroll Ijdpfxswwwcke Aabsih - Newly arrived -

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Isdpfx Asvxa Dboabeih See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: used, TECHNICAL DETAILS - Rolling resistance : 20 [t] Ijdpfoxg Schox Aabsih - Diameter of the roller shafts : 69,85 [mm] - Length of the roller shafts : 100 - 160 [mm] - Permissible roller diameter : 220 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 29 [kW] EQUIPMENT - CNC : Siemens Sinematic HMI - Coolant tank

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Iisdpoxbfwzsfx Aabjh Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Iijdpov Rb Apefx Aabjh Download PDF file for photographs

Condition: used, Just this price to free space Ijdpfx Aew Sm Drsabjih

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, Type: Thread rolling machine Ijdpfx Ajwwwgvsabjih Manufacturer: Thommen – Made in Switzerland Model: PR17-CNC / AC Year of manufacture: 1999 BOSCH control unit - newly arrived - Comparable to Profiroll

Condition: used, Year of construction: 2003, Thread rolling machine Iodpfot Hmv Nex Aabsih ESCOFIER H20Z 2-roll 2 moving heads (in sync) 2 - 20 Ton rolling pressure workpiece diameter: 75mm max. tool diameter: 140-200 mm Max plunge width 160 mm Shafts dia: 69.95 Swivelling: +/-6°, New: 2003 under power in our warehouse, M i M u machine tools

Condition: used, Threadrolling machine ESCOFIER M6 Iiodpoxbt Izsfx Aabeh

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers Ijdpfx Aash A S Htjbjih - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Isdpfx Aexalinsaboih

Condition: like new (used), Thread rolled both ends the same time! Diameter range M6-M16 Max total length 600 mm. Iisdpfjwalx Esx Aabeh Max threaded length 60 mm. Adjustment is not difficult at all. We could offer machine with dies according to your wish, be made by our factory too. We are located at Athens, Greece, near to the center. You can view machine under power after appointment.

Condition: used, GEWINDEROLLMASCHINEN VEB WMW GWR 80GR Iedpfx Asig Txmoaboih WITH A LOT OF TOOLS

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Iijdet H Ty Uepfx Aaboh Power (Ton): 30 Number of rollers: 2

Condition: used, Threadrolling machine PEE-WEE 62P12 Isdpfexbt Iuox Aabsih

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Iiodpfxjuz If Nj Aabeh - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1747, workpiece diameter (max.): 45 mm, spindle diameter: 54 mm, Precision Thread Rolling Machine – Nissei FA-6U Offering a high-quality Nissei FA-6U thread rolling machine, made in Japan. This machine is in excellent working condition and known for its precision and durability. A trusted Japanese trademark, ideal for high-accuracy thread forming applications. Pressure: 6 t Iedpfx Ajwz R Twsabeih Workpiece diameter min/max: 3/45 mm

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm Iijdst Hwzcjpfx Aabeh thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Iijdpfx Asw Nxnwsabjh Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] Iisdpfxsuhb Uhj Aabjh EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm]

Condition: used, Year of construction: 2001, pressure 0,2-40 t Iiedpfxjt Hw N Te Aabsh max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Max. part length : 1350 [mm] - Max. teeth length : 1200 [mm] - Max. teeth diameter : 120 [mm] - Power : 18,5 [kW] Iiedsuhb Unopfx Aabjh - Machine dimensions : 2840 x 1700 x 1420 [mm]