Used Coating Thickness Gauge for sale (11,280)

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. Nsdpoy D Uphefx Aqvolb The machine was disconnected from the mains in working condition. Dismantling and transport are the responsibility of the buyer.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel - Commissioning / installation support can be provided Nlodpsyl Rr Hofx Aqvsb - Documentation available System is dismantled and ready for transport.

Condition: good (used), operating hours: 2,200 h, load capacity: 1,200 kg, lifting height: 1,800 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,200 km, The WIDE GAUGE stacker of this brand is from 2006 and is in good condition; Capacity 1,200 kg; Lifts up to a height of 1,800 mm; Clearance height is 2,100 mm; Only 2,200 hours on the counter; Equipped with stainless steel forks! Outside fork width 88cm, inside fork width 69cm; Gel battery is maintenance-free and comes with an external charger. Watch the video on YouTube. Nodpfew Nk Szox Aqvjlb

Condition: used, Year of construction: 1990, Working width 630 mm Dimensions (L/W/H) 115x110x120 mm turning speeds 5000 U/min connected load frequency 380 V Nlodpfonn Nqwsx Aqvjb

Condition: refurbished (used), Year of construction: 1996, machine/vehicle number: AB.98961, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 520 mm, tool diameter: 120 mm, number of blades: 4, rotational speed (min.): 4,500 rpm, overall weight: 700 kg, blade shaft diameter: 120 mm, chip removal: 8 mm, extraction nozzle diameter: 150 mm, planing height: 250 mm, SCM GROUP branded thicknessing planer with electronic table lifting. Working width of 520 mm, a robust machine suitable for professional use. High performance and reliability. A proven machine with a 6-month warranty, including post-warranty service. Planing head Ø 120 mm, 4 conventional knives Lower table with lifting mechanism using 4 screws Motor-driven lifting of the lower table with micrometric adjustment 4 feed speeds for the workpiece Technical data Working width max. 520 mm Working height min. / max. 3 / 250 mm Working table dimensions 520 x 900 mm Motor power with brake 5.5 kW Maximum material removal 8 mm Number of knives 4 pcs Ø knife head 120 mm Knife head speed 4500 rpm Material feed speed 5-8-12-18 m / min Dust extraction port Ø 150 mm Nsdpfx Asy Szz Tsqvslb Weight 700 kg MACHINE READY FOR OPERATION

Condition: good (used), Year of construction: 2008, operating hours: 2,500 h, load capacity: 1,200 kg, lifting height: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,500 km, The WIDE-TRACK stacker from the brand is from 2008 and in good condition; Capacity 1,200 kg; Lifts up to a height of 1,400 mm. Clearance height is 2,100 mm. Only 2,500 operating hours; Equipped with stainless steel forks! Outside fork width 88 cm, inside 69 cm; Gel battery is maintenance-free and comes with external charger. Watch the video on YouTube. Nlsdpfx Aqoy R Aqtjvob

Condition: new, Type MB106H Max working width 630 mm Cutterblock diameter mm Knives 4 Nlodpfxehmbl Ue Aqveb Max. stock removal 4 mm Feed speeds 7/14 m/min Min./max. working height 3-220 mm Main motor power 7,5 kW Suction hood diameter 2x100 mm Transport dimensions mm Weight kg

Condition: new, Type MB105H Max working width 500 mm Cutterblock diameter mm Knives 4 Max. stock removal 4 mm Feed speeds 7/14 m/min Min./max. working height 3-220 mm Main motor power 5,5 kW Nodpfx Aqehmbl Revelb Suction hood diameter 2x100 mm Transport dimensions 760х900х1280mm Weight 460 kg

Condition: excellent (used), Felder AD 941 jointer/thicknesser Spiral cutterblock Main motor 5.5 kW, Length of jointer tables 2200 mm, Planing width 410 mm, Nljdpfxjy Szvks Aqveb Thicknessing height 250 mm, 2 feed speeds, Electric adjustment of the thicknesser table with an electric height indicator Machine ready for operation, quiet Very good condition

Condition: used, Year of construction: 2018, Wagner electrostatic powder coating system for enamel application, year 2018, serial number 30210, with a touch screen control panel, consisting of: • 1 PVC spray booth with overall dimensions of length x width x height: 3200 x 2130 x 4000 mm • Dimensions of the part entry/exit opening: 1000 x 1000 mm • 1 HERDING filter (cyclone) with automatic powder recovery • 1 shaker for powder suspension with extraction and powder recovery • 1 EP powder feeder with 32 pumps (injectors) • 12 automatic spray guns, model PEA-C2, for enamel application, with a double blade head • 9 universal EPG/S2 control units for powder guns • 1 GCA compressed air treatment unit used in the system (heating/humidification) • 1 overhead monorail transport system, 35 m long, serving the spray booth. The line is located at the parent company in Italy, near the town of Pordenone. Nsdpfx Aey Tn Atjqvolb Direct contact is possible, upon prior arrangement.

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Njdpfx Aoy T N Iqeqvolb

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Nodpfsy Szwuox Aqvelb Substrate thickness: Flexibly adjustable up to 80 mm Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2014, condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 - stainles steel cyclone diam.: 500 mm Nsdpevxrm Usfx Aqvjlb - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P

Condition: used, EKOMAL powder painting line Maximal dimension 1200 x 700 x 100, floor dimension 1800 x 1200 List of equipment: 1. three-speed spray washer with exhaust fan electrically heated. First zone of the line: - Detail washing, tub capacity of about 2 thousand liters. Electric heating. In addition, reheating was installed from the plant co. Second zone pre-rinse bath capacity of about 1 thousand liters. Gas dryer after washing with air curtains and heater. Second zone of the line - drying of the detail, heating medium propane technical or propane-butane. Riello gas burner Third zone of the line-powder booth with manipulators adapted for automatic spraying, detachable blotting paper filter blocks Third zone - painting of the workpiece, booth equipped with two manipulators and a station for manual painting. ESB control cabinet. Nsdoiqgkcopfx Aqvjlb 4th gas furnace Fourth zone - firing, gas furnace with two heaters on the upper level, siphoned. 5. continuous motion overhead conveyor with tensioning and driving station Fifth zone -Suspended conveyor with loading and unloading zone. The length of the transport chain is 112 mb. In addition, it is equipped with crossheads to facilitate loading. 112 pcs. Maximum travel speed 1m/min, adjustable from 0.3 m/min. Includes chain, drive, chain tensioning unit, control. Allows reverse gear, length 77m

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: Nlsdpfxsxna U Uo Aqvjb - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: used, Year of construction: 1992, Working width: 520 mm Planing height: 250 mm Cutterhead: strip knives Number of knives: 4 Height adjustment: electric Planing thickness display: scale Feed speed: 2 speeds Infeed roller: steel Nledpeyt E Raofx Aqvsb Outfeed roller: steel Table rollers: no Motor power: 5.5 kW Extraction port: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg

Condition: used, Year of construction: 1977, Working width: 630 mm Planing height: 280 mm Cutterhead: Strip knives Number of knives: 4 Nsdpfxjln Ud Ns Aqvolb Height adjustment: electric Planing thickness display: scale Feed speed: 7 / 14 Infeed roller: steel Outfeed roller: steel Table rollers: yes Power consumption: 12 kW Extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 2000 kg

Condition: used, Year of construction: 1968, Used machine Nodpfx Aqey Ih Swjvslb Year of manufacture: 1968 Features and technical data: Planing width: 630 mm Planing height: 220 mm Speed of 4-knife cutterhead: 5,500 rpm Motor power: 6 HP Feed rate: 7/14 and 9/18 m/min Weight: 1,150 kg Due to the missing motor brake, the machine can only be sold as a parts donor! Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Planing width: 520 mm Min./Max. working height: 3 – 240 mm Motor power: 5.5 kW, 400 V, 50 Hz Cutterhead speed: 4,500 rpm Cutterhead diameter: 120 mm Number of planing knives: 4 Thicknessing table dimensions: 520 x 850 mm Feed speed: 6.5 / 10 / 13 / 17 m/min Extraction connection diameter: 150 mm Features: - Electric height adjustment - Handwheel for fine adjustment of thicknessing table height Nljdpfx Aqjy Egmusvsb - Spiral infeed roller - Segmented pressure beam - Under-table roller - Undervoltage release - Emergency stop switch - Knife setting gauge NEW drive belts NEW ball bearings NEW planing knives Dimensions (L x W x H): approx. 1,120 x 990 x 1,000 mm Weight: approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • The prices stated are ex-location, loaded free of charge. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty claims. Buyers are welcome to inspect the machine at our premises. • Special agreements are only valid in written form. (We answer inquiries only when you provide your address and phone number!)

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel adjustable speed mobile outfeed conveyor belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm Njdpsy Nx Hujfx Aqvelb

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, Colour: Grey Weight: 820 kg Dimensions (LxBxH): 105 x 125 x 125 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 Nljdpfx Aewnhyzeqvjb - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Colour: Grey Thicknesser Robland D510 Serial no. Nlodownh Tbepfx Aqvob Year of construction 2008 Table dimensions 510x850mm Max. working width 510mm Min-max working height 250mm Max planing depth 8mm 4 knives Tersa 4 throughput speeds 5/8/10/16 m/min Electrical high/low 380V, 5.5kW, 6000 Rpm Dimensions: 1200*880*1100mm, weight 480kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Max. planing width [mm]: 530 - Max. planing height [mm]: 300 - Max. planing depth [mm]: 530 - Planing shaft speed [rpm]: 5000 - Worktable length [mm]: 880 - Planer block diameter [mm]: 110 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Extraction nozzle diameter [mm]: 150 - Max. feed speed [m/min]: 19.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, total width: 850 mm, total height: 1,200 mm, Weight: 1.250 kg Dimensions (LxBxH): 182 x 85 x 120 cm - Year: 2015 - Documentation available: No - CE certificate present: No - Serial number: 14053701 - Min. planing width [mm]: 10 - Max. planing width [mm]: 400 - Infeed table length [mm]: 880 - Outfeed table length [mm]: 880 - Total table length [mm]: 1820 - Work table width [mm]: 410 - Cutterhead diameter [mm]: 100 Nlodpexz D Dtefx Aqveb - Number of knives [pcs]: 4 - Number of height adjustment cylinders [pcs]: 1 - Rollers in table [pcs]: 2 - Diameter extraction nozzle [mm]: 110 - Height adjustment: Manual - Voltage [V]: 400 - Transport dimensions: 1820mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, total width: 900 mm, total height: 1,250 mm, Colour: Grey Weight: 800 kg Dimensions (LxBxH): 130 x 90 x 125 cm Price: On request - Details: - └ Description: Bearings sound bad Nlsdpfxjyu Sd As Aqveb - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 63CE00007-8 - Max. planing width [mm]: 630 - Min. planing height [mm]: 2 - Max. planing height [mm]: 288 - Worktable length [mm]: 860 - Worktable width [mm]: 630 - Planer block diameter [mm]: 100 - Number of cutters [pcs.]: 4 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 160 - Height adjustment: Manual - Options: Braked motor, Digital readout - Feed speed: Manual - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 17.5 - Fuse [A]: 32 - Transport dimensions: 1300mm x 900mm x 1250mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates) Nledpfx Asyyyxgeqvjb