Thickness planer Holzprofi DMS53 exhibition

Holzprofi 7-DMS53

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!) Hodpfx Aey Egmuskrenu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Hodov A Hhujpfx Akrsnu Weight 900 kg Total power requirement 7,5 kw

Condition: used, Year of construction: 1991, Planing width: 530 mm Planing height: 240 mm Minimum planing height: 1 mm Maximum chip removal: 8 mm Diameter of cutterhead: 120 mm Speed: 5000 rpm Cutters: 4 pcs Motor: 4 kW Hnsdjzi Augopfx Akrou Feed rate: 5, 7.5, 10, 15 m/min Table dimensions: 960 x 530 mm Dust extraction port: 140 mm Weight: approx. 970 kg Location: Customer

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TH2000MessraumRES, DEMAG KBK Crane System Overhead Crane Runway 9.3 x 5.3 m (Bridge travelling path approx. 5 m) The crane is also available in various other dimensions, multiple units in stock with elevated carriages. Load capacity / Lifting capacity: 500 KG Technical data of the system: Crane runway made from Demag KBK2 profiles with elevated carriage – crane girder is located between both running rails for maximum lifting height with internal power supply !! System is delivered complete: KBK profiles, profile connectors, carriages, end plates, drag chain (internal conductor rail system optional!) brackets/suspension elements etc. including Demag DK chain hoist, capacity 500 KG Crane is dismantled and immediately available Various cranes in stock Hnsdpov Iai Nefx Akrju Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by prior arrangement only Demag KBK1, KBK2 and KBK3 profiles in stock! Other KBK systems with different capacities also available. Load capacities from 125 KG to 1600 KG Please request your required crane runway with load capacity and dimensions without obligation.

Condition: used, mileage: 95,490 km, power: 79 kW (107.41 HP), first registration: 02/2021, fuel type: diesel, empty load weight: 2,089 kg, maximum load weight: 711 kg, overall weight: 2,800 kg, tire size: 215/65R15C, axle configuration: 4x2, wheelbase: 2,933 mm, next inspection (TÜV): 02/2025, fuel: diesel, energy efficiency: B, CO₂ emissions: 167 g/km, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.4 l/100km, brakes: other, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,980 mm, total width: 1,990 mm, total height: 2,330 mm, loading space length: 2,554 mm, loading space width: 1,775 mm, loading space height: 1,406 mm, front tire size: 215/65R15C, rear tire size: 215/65R15C, Equipment: ABS, air conditioning, airbag, cabin, central locking, electronic stability program (ESP), fog lights, onboard computer, parking sensors, seat heater, sliding door, soot filter, traction control, * German vehicle * Not in the best condition * 1 owner * Original, only 95,490 km * Condition: Various paint damages * Truck registration * Body/Superstructure: Box van, high roof, medium height * Loading area: Length 2,554 mm x Width 1,775 mm x Height 1,406 mm * Rear wing doors without glazing (opening angle 180 degrees) * Sliding door, loading/passenger compartment, right side * Interior trim in the loading/passenger compartment: Wood * Floor covering: Vinyl in the loading/passenger compartment * Cargo area light: LED * Lashing eyes (8) * Cargo area protection package * Start-Stop system * Electric auxiliary heater * Electronic Brakeforce Distribution (EBD) * Driver-assistance system: Crosswind assist * Driver-assistance system: Emergency braking assist * Engine 2.0 L - 77 kW TDCi CAT * Diesel particulate filter * Driver-assistance system: Intelligent speed control * Driver-assistance system: Hill start assist * Low emission according to emission standard Euro 6d-TEMP * Electronic traction control * Airbag, driver's side * Electronic Stability Program (ESP) * Seats in the cab: Passenger seat, heated * Seats in the cab: Driver's seat, heated * Anti-lock braking system (ABS) * Drive type: Front-wheel drive * Exterior mirrors, electrically adjustable and heated * Turn signal integrated into exterior mirror * Windshield, heated * Transmission: 6-speed * Radiator grille, black/grey * Side protection strips * Daytime running lights * On-board computer * Heat-insulating glass, lightly tinted * Trailer Stability Assist (TSA) * Mud flaps, front and rear * Air conditioning * Audio system 13: Digital (DAB/DAB+) radio reception with 4" multi-function display * Audio system: Radio with USB and Bluetooth hands-free system * Visibility Package 1 * Fog lights * Power windows * Seat Package 4: Driver's seat (4-way adjustable) - Passenger double seat, fabric * Driver's seat armrest * Basic * Parking pilot system, front and rear * Wheelbase 2933 mm * Gross vehicle weight 2,800 kg * Unladen weight 2,089 kg * Payload 711 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Hsdpevxg Nkjfx Akronu Subject to changes, prior sale and errors.

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma - Technical Documentation TECHNICAL PARAMETERS: shaft width: 630 mm detail thickness: 240 mm 4 shaft knives: knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW electric height adjustment: Hnedpfx Asiq Dk Sskrju two types of feed speed: dimensions (length/width/height): 120/128/125 cm weight: 1060 kg

Condition: new, Type RP630 Working width 630 mm Min. working length 500 mm Hnsdpfxjfhnx No Akreu Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 9,25 kW Motor of agregate 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of roller 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 4000 m3/h Transport dimensions 1200x1750x2400 mm Weight 1100kg

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor Hsdpfx Aksw I T N Hjrenu ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: as good as new (ex-display), Code: N0485 Brand: FELDER - AUSTRIA Model: D 951 - CE Standard Hedpezqdz Refx Akrenu Automatic thickness planer – CE Standard Technical data: Shaft with 4 Tersa replaceable blades Diameter 120 mm Working width 504 mm Working height 3/254 mm Table length 900 mm Max chip removal 8 mm Automatic table lift Electronic depth display Variable feed speed from 4 to 16 metres/min N° 2 rollers on the table Motor power Hp 10YT Dust extraction connection diameter 140 mm Overall dimensions mm 1050 x 1050 x 1100 h Weight kg 650

Condition: used, Heavy-duty thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 0.1 mm increments for precise positioning Hjdpfx Akey A Nruersnu 4-knife safety planing cutterhead Table with four-point support Main motor 4 kW Feed rate 5, 8, 12.5, 19.5 m/min Steel infeed roller Segmented pressure bar made of solid aluminum Under-table roller Year of manufacture 1997 CE conformity Machine is FUNCTIONAL Available from stock in Lieboch