Used Copeland Compressor for sale (3,293)

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Dedjvk R Dcopfx Ap Dowc Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit Dwedeif Hunspfx Ap Dec -Manufacturer: Dorin, complete refrigeration compressor cooling unit -Type: UA - K470CS-01 -Power: 3.48 kW / 1450 rpm -Volume flow rate: 23.37 m³/h -Max. operating pressure: 30.5 bar -Quantity: 2 pieces available -Price: per piece -Overall dimensions: 1900/1000/H940 mm -Weight: 304 kg/unit

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Dodpfx Aeh A Sfdop Dewc Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: good (used), Schneider Compressor 670-270 ST Dsdpfx Apszzclpo Djwc used, including refrigerant dryer Tank volume 270 liters Suction capacity 670 liters/min Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Motor power 4.0 kW / 400V Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: like new (used), AIRPOL PR75 Screw compressor Excess pressure [MPa] - execution options: 0.75 / 1.0 / 1.3 Variable performance: Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740... Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740 Capacity min-max [m3 / h] [1.3 MPa]: 212 - 565 Compressed air connection: G 2 Ambient temperature [° C]: +5 ÷ +40 Cooling air demand [m³ / h]: 11700 Temperature of compressed air [° C]: about 10 above ambient temperature Sound level [db (A)]: 75 Transmission mode: direct drive Rated engine power [kW]: 75 Rated fan motor power [kW]: 4 Degree of motor protection: IP55 Supply voltage [V]: 400 Recommended cross section of the power cord [mm2]: 3x70 + PE Protection [A]: 160 Manufacturer: Airpol Model: PR75 Height: 2200 mm Width: 1500 mm Length: 1675 mm Dwsded S Udcepfx Ap Dsc Weight: 1900 kg Total power: 75 kW

Year of construction: 2016, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 09144PER2A, Refrigerating scroll compressor Trane CSHC 093R0A0S Technical data: ♦ Positive displacement refrigerant compressor ♦ Scroll compressor ♦ Hermetic compressor, internal motor ♦ Compressor model & development sequence ♦ 3500 rpm vertical welded steel shell Designates size - nominal tons = 9.3 tons Voltage designator 208/230-60-3 Number of cylinders that unload zero -no unloading Design sequence (alpha). Factory assigned prints on the nameplate. Djdpfx Apefm A Dmj Dswc Unloader control and method of unloading - no unloading; Basic compressor variation: 1 Braze copper-clad refrigerant connections 2 Rotalock oil equalizer fitting with threaded cap The principles of operation: The suction gas is drawn into the compressor. The gas then passes through the gap between the rotor and stator, cooling the motor. The gas then enters the intake chamber, which encircles the scrolls. The oil in the suction gas is separated by changing directions and impinging on surfaces within the compressor and then draining back to the oil sump. Finally, the suction gas is drawn into the scroll assembly where it is compressed and discharged into the dome of the compressor. The dome of this compressor acts as a hot gas muffler which dampens the pulsations before the gas enters the discharge line. How the Scroll Compressor Trane Works General A 3-D compressor has two scrolls. The top scroll is fixed and the bottom scroll orbits. Each scroll has walls in a spiral shape that intermesh. Inlet - First Orbit As the bottom scroll orbits, two refrigerant gas pockets are formed and enclosed. Compression - Second Orbit The refrigerant gas is compressed as the volume is reduced closer to the centre of the scroll. Discharge - Third Orbit The gas is compressed further and discharged through a small port in the centre of the fixed scroll. Price: 1.000 Euro + TVA, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: excellent (used), Used Bitzer 4TCS-8.2Y-40P/sn 1672508990, semi-hermetic reciprocating compressor on Freon. Scroll compressor ESH736Y-40S/sn 1072500425, 2 vertical receivers Bitzer FS 152/sn 1172402177 and Bitzer FS 302/sn 1172601712 The system is complete with an oil separator, oil tank and pressure and safety switches/gauges. Year of manufacture 2007. Nominal Pressure 19 bar Output (m3 /hour) 41.33 m³/h Engine power 20.6 kW Volts 400 V Dodpfeir E Dnox Ap Dswc Frequency 50 Hz Sound level 74.5 dB(A) Weight 134 kg Condition goo Cooling capacity 21.6 kW Refrigerant R404A Number of cylinders x Diameter x Piston head 4 x 60 mm x 42 mm Intake line 35 mm - 1 3/8" Delivery line 28 mm - 1 1/8" according to the productivity according to the EN12900 standard ▼ tc ► to 5°C 0°C -5°C -10°C -15°C -20°C -25°C -30°C 40°C Q [W] — — 27759 22788 18477 14755 11559 8831 P [kW] 9,86 9,05 8,2 7,34 6,46 5,57 I [A] 16,69 15,43 14,14 12,83 11,52 10,22 45°C Q [W] — — — 20560 16622 13219 10294 7796 P [kW] 9,41 8,47 7,52 6,57 5,6 I [A] 15,99 14,54 13,1 11,67 10,26 50°C Q [W] — — — 18347 14792 11714 9065 6801 P [kW] 9,74 8,71 7,68 6,65 5,61 I [A] 16,5 14,91 13,34 11,8 10,28 Conventions • tc - condensation temperature • to — evaporation temperature • Q [W] - cooling capacity (R404a) • P [kW] - power consumption • I [A] - current Price Euro 2.250 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Two-stage compressor Bitzer -Type: S6F-30.2 -Volume: 101.1 m3/h -Cooling capacity for R404A: 35.7 kW at -30°C/40°C, 25.3 kW at -40°C/40°C -Items in magazine: 2 -Reference number: S 256 -Condition: Used in very good condition, ready to work Dwodpfx Apszxy Uio Djc

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Dodozu Aibepfx Ap Djwc Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 air compressor 3.7 m3/min Operating hours: 2,371 hours Deutz engine Dedpfsiywpzjx Ap Djwc Type: diesel

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Dwjdpfxsz Dpt Ao Ap Dsc

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 270 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 270 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 270 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Dwsdpfx Aomqlprsp Djc Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Compressor dimensions 1320 × 650 × 945 mm Dimensions with tank 1495 × 1200 × 1545 mm Weight 350 kg

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 S/N 1049 YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED Djdpfx Ajzwnykop Djwc

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 1,080 kg, total length: 2,200 mm, total width: 1,300 mm, total height: 2,100 mm, power: 22 kW (29.91 HP), Frequency-controlled screw compressor, 22 kW, 4-in-1 Dwodpfx Apezw A Tfe Dsc With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-stage fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 2.3 m³/min at 1.6 MPa Integrated pressure vessel, approx. 550 l

Condition: used, Technical specifications: Tank capacity: 500 L Djdpfxezvmrij Ap Dewc Flow rate: 950 l/min Max. pressure: 10 bar Number of pistons: 2 x 2 Power supply: 400 V Engine speed: 2800 rpm Engine power: 2 x 5.5 kW Overall dimensions: Length: 2100 mm Width: 600 mm Height: 1300 mm

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2.2 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 screw compressor Dodpfezxzvnsx Ap Dewc Atlas Copco screw element 15 kW motor Capacity: 2.20 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 10412 hours Compressor in fully working condition.

Condition: used, ATLAS COPCO TYPE: ZR90 Dwedpeuruf Njfx Ap Dsc SCREW COMPRESSOR

Condition: good (used), Motor output 1 kW Max. pressure 16 bar Djdsvwgn Rjpfx Ap Dowc

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Dwodpfx Apjvmivce Dsc Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Dedpfxjvk R A Se Ap Djwc Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: repair required (used), Year of construction: 2008, Manufacturer: BECS Master Chiyoda Kogyo Co Tip: HWP 501 Djdorigaijpfx Ap Dowc Year of manufacture: 2007 Max. Tube size 19 mm (1.5 mm wall thickness) The device is currently not working. PLC error

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Engine: 45 kW Dsdpehtq Dvjfx Ap Djwc Capacity: 6.5 m³/min

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm Dwjdpshabk Dsfx Ap Dec -Weight: 592 kg

Condition: excellent (used), CompAir L 75 compressor Operating hours approx. 3100 h (hours under load) Used as a backup compressor Dedpfxoh U R Rwe Ap Dowc Volume flow rate 10.25 m³/min Motor power 75 kW In very good, ready-to-use condition, directly from production!!!

Condition: excellent (used), Year of construction: 2011, volume flow: 3.21 m³/h, operating pressure: 8 bar, pressure (min.): 10 bar, Boge C 30 D screw compressor With desiccant dryer 22 kW motor Capacity: 3.21 m3/min Pressure: 10 bar Year of manufacture: 2011 Operating hours: 16,300 hours COMPRESSOR IS IN FULLY WORKING CONDITION. Dodpfxsywz Hms Ap Dswc NET PRICE: 14,000,- GROSS PRICE: 17,220,-