Used Crank Winch for sale (1,830)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Kodpfxoz Ag Rro Adlodt - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear Kodpfx Ajzrppcsdledt - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Year of construction: 2022, condition: used, General information New: Yes Field of application: Construction Drivetrain Make of engine: Magni Weights Empty weight: 480 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Working pressure: 250 bar Cutting power: 250 kN Required hydraulic flow: 40 l/min Production country: IT Kodpfjxf Eawex Adlodt Additional information Please contact Sales Department Collé Sittard for more information

Condition: used, functionality: fully functional, mileage: 7,96,299 km, Year of construction: 1999, MAN 33464, 6x4 air suspension, reinforced frame bridges, 33 t technical gross weight. Kdsdpfx Aoy Ivhajdlot With expired technical, Hungarian papers, temporarily withdrawn. In usable condition for its age. Platform: 620 x 250 (built by Schwarzmüller in Germany), with cargo fasteners, reinforced back wall (load carrier). Crane: Palfinger 66000 E (1999) with 6 hydraulic members, 2.5 t winch, accessories. The control block on the crane has been renovated, the crane radio remote control is new: transmitter, receiver, remote control, cables, complete set. 4.3 m /13.5 t; 9.0 m /6.1 t; 16.0m / 3.2t.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Kdsdsza Aiyspfx Adlst Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: used, mileage: 47,750 km, power: 62 kW (84.30 HP), first registration: 11/1955, fuel type: diesel, overall weight: 7,490 kg, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1955, Equipment: cabin, cable winch, Vehicle location: Bovenden, Kz. Haus, 1x couch, switch 4, cable winch, leaf suspension Superstructure: Tiltable body with ramps for transporting cars, THIS VEHICLE IS ONLY AVAILABLE ONCE IN THE WORLD! 6.3l diesel engine Kdjdpfx Adsvhhdzolet Extensively restored Folding windshield, folding couch, right-hand drive, loading length 4m, H license plate, Alfa Romeo engine and gearbox, power steering, Trilex rims, weight reduced from 9 to 7.5t. Bought by the last German owner in Italy in the 90s. Extensively restored in the early 2000s. The restoration took more than 2 1/2 years. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 10,000 km, power: 375 kW (509.86 HP), first registration: 03/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB Actros ProCabin 2651 STX Horsetruck / Motorhome demonstration vehicle with living trailer FULLY EQUIPPED! Capacity for 7 horses, side and rear ramps, pop-out, pop-up, downstairs kitchen, basement under the living area, storage compartments all around the truck, 6 kW diesel generator, 550-liter fresh water tank, 300-liter waste water tank, 6-7 sleeping berths, living room, large bed above the bathroom, additional groom’s bed, video surveillance and temperature monitoring in horse compartment, LG stationary air conditioning, auxiliary heating, 2 TVs/Sat, precious wood interior, bathroom, shower, toilet, A/C, kitchen, leather seating group, microwave, refrigerator & freezer, dishwasher, external tack locker, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer coupling, and much more. Errors, input mistakes, and prior sale excepted. * NET SALES POSSIBLE. * Top leasing offers * Net price domestic plus 19% VAT. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 Ksdoyvnhbopfx Adlodt 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer / Andreas Theurer

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 58,000 mm, first registration: 01/2016, mast type: telescopic, Year of construction: 2016, Drive: Wheeled Payload: 65,000 kg Gross vehicle weight (GVW): 42,388 kg Mast: Telescopic (4 sections) Mast length: 58 m Lifting capacity: 65,000 kg Superstructure make: GROVE RT765E-2 Technical condition: very good Visual condition: very good Kdsdpfjwud E Tex Adlet

Condition: used, Year of construction: 2017, Dough divider and rounder WP Multimatic MUS 6 Year of manufacture: 2017 Condition: refurbished 6-row head machine Dough yield of 148 – 160 % Weight range: 35-85g Measuring piston diameter: 50 mm Hourly output of 600 to 2000 pieces per row Max. hourly output: 12,000 pieces Kodpfsz A Stcjx Adlodt Adjustable working and forming speed Weight adjustment via hand crank Spreading belts can be folded down for double pieces Dough feed height: 185 cm Dough hopper with safety bar Incl. 1 forming drum – selection based on availability Optional: Double piston for smaller weights up to 25g, additional forming drum for various weight ranges

Condition: used, Year of construction: 2009, load capacity: 10,000 kg, Overhead crane as shown in the illustration. Kedpfxozhmxae Adlodt

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 43,000 mm, first registration: 02/2009, mast type: telescopic, Year of construction: 2009, Drive: Wheel Number of cylinders: 6 Kdjdpfx Adowud H Rjlot Unladen weight: 52,605 kg Mast: Telescopic (4 sections) Mast length: 43 m Lifting capacity: 81,646 kg Superstructure brand: GROVE RT 890 E Technical condition: very good Visual condition: very good

Condition: good (used), Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch without crane control -Cable pull: Type T510 S -Load capacity: 2000 kg -Roller spacing: 300 mm / max 355 mm, dimensions see photos -Main stroke/fine stroke: m/min -Hook path: 6.0 m -Drive system: Type W 12 20 -Travel speed: 20 m/min -Transport dimensions: 1110/700/H530 mm -Weight: 188 kg Kdedpfx Ajzkq Tasdlet

Condition: used, mileage: 86,335 km, power: 118 kW (160.44 HP), first registration: 05/2021, fuel type: diesel, tire size: 225/65R16c, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, Year of construction: 2021, = Further Information = Front axle: Tyre size: 225/65R16C; Steered; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle: Twin tyres Unladen weight: 2,447 kg Payload: 1,053 kg Gross vehicle weight: 3,500 kg Kedpezgm Dtefx Adledt Damages: none

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, overall weight: 22,400 kg, total length: 24,000 mm, total width: 3,500 mm, load capacity: 40 kg, power: 40 kW (54.38 HP), Equipment: documentation/manual, ABUS bridge crane, 40 t + 16 t auxiliary winch. Year of manufacture: Crane and main winch: 1997. Auxiliary winch: 2003. The crane was installed in this facility in 2003. Span: 21,100 mm. ABUS wire rope winches. Radio remote control. Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged. Ksdpfx Aezzagqedlodt

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Kedji Rizujpfx Adledt Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Year of construction: 2022, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Magni boom with winch JW2000 / 2 tons / suitable for RTH & TH series / year of manufacture: 2022 / DEMO unit / in stock & immediately available Ksdpfx Adozb Ugmjlsdt Price: €6,990.00 net / €8,318.10 gross - Max. load capacity: 2,000 kg - Length: 2,390 mm - Rope diameter: 10 mm - Working length of rope: 25,000 mm - Rope payout speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom with integrated winch - Lattice boom construction made of tubular profiles with an optimal weight/performance ratio - Winch with pressure roller and hydraulic end switch for reeling in/out the rope This attachment is suitable for the RTH and TH series. Product code: ATT-04-015 We have many other Magni attachments in our warehouse that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 019995 = Further information = New: No Intended use: Construction Please contact Marius Herden for further information.

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter Kdsdjx Uy Rljpfx Adljt 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Kodewgm Hkopfx Adlodt Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: used, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 09/2026, loading space volume: 47 m³, total length: 10,750 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors and omissions excepted, and with the right to sell in the meantime: Kedpfx Adsz Dc Iajlodt Reisch, approximately 47 cbm grain hopper with combination pendulum flap (Vehicle 148) First registration: June 12, 2012 Type RHKS-35/24 AL Permissible total weight: 35,000 kg Unladen weight: 6,100 kg Payload: 28,900 kg Overall length: 10,750 mm Overall width: 2,550 mm Overall height: 3,600 mm TÜV (technical inspection): 09/2026, SP (safety inspection): 03/2027 Smooth walls Roll cover, platform Combination pendulum flap Grain slide Doors 1/3 + 2/3 + pendulum flap 2 x 12-ton, 2-speed geared winch 2 x wheel chock 1st axle: lift axle BPW drum brakes Tires: 385/65R22.5, 1) approximately 60/40%, 2) approximately 40/60%, 3) approximately 80/80% Storage box, plastic, driver’s side, center; dust bag, passenger side Smooth floor and walls EWABCO ABS Air suspension with raising and lowering function Price: €14,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to €5,000.00; for disputes exceeding this amount, it is the regional court of Schwerin. Errors and omissions excepted, subject to prior sale.

Condition: good (used), Year of construction: 1969, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist Ksdpfx Aoyvum Rodlsdt -Manufacturer: SWF, crane chassis with electric cable winch -Cable pull: Type 50H8d -Load capacity: 10,000 kg -Drive system: S0.85-4 -Roller spacing: mm, dimensions see photos Quantity: 1 piece available -Transport dimensions: 1250/1960/H820 mm -Weight: 1320 kg

Condition: used, Year of construction: 2015, Dough divider and rounder, Fortuna Primus Pro 6 Year of manufacture: 2015 Condition: cleaned and inspected 6-row head machine Hopper volume: 40 kg Maximum hourly output: 9000 pieces Kodpjz A Sf Eofx Adlsdt Weight range: 40-100g Touchscreen control with recipe memory Equipped with scraper and pressure roller at the outlet Weight and shaping chamber height adjustment via hand crank Machine on rollers, movable with locking mechanism

Condition: good (used), Year of construction: 1980, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t Kedpfx Asvyzinedledt -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Condition: used, mileage: 31,388 km, power: 160 kW (217.54 HP), first registration: 11/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1992, Equipment: ABS, all wheel drive, navigation system, M-Benz 1224 4x4 RW2 Fire Engine VIN: 5569873 Vehicle ID: 1151324 ????? ????? ??? ????? ?? ????? Chassis / Components: * Wheelbase: 3,600 mm * Leaf spring suspension * Tires: 10 R 22.5 * Tire tread depth: Front ~90%, Rear ~80% * 1x Diesel tank * Winch, 60 m / 13mm cable * Trailer coupling Cab: * 3-seater * 2x Rotating beacons Body: * Metz RW2 * Crane type: D20SE * Rotzler winch, 60 m * Lighting mast, 6 m * Generator Engine / Transmission: * 11,309 ccm // 218 hp / 160 kW * 5-speed * Differential lock * Power take-off Weights: * Gross vehicle weight: 12,000 kg * Unladen weight: 8,500 kg * Payload: 3,500 kg Other: * German vehicle * Rescue saw (for metal and glass) New inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export / transit license plates; furthermore, we can arrange for the transportation of your purchased vehicles within Germany. Contact us! ----We speak the following languages: German, English, and Russian! ----No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Kjdpfxjzxvg Is Adlsdt Day passes / Export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with comprehensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Ksdpfx Adjzn Afpjlsdt Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the depicted ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing section with automatic edge infeed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened; saws have been sharpened; diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e., only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier."

Condition: used, mileage: 3,65,385 km, power: 397 kW (539.77 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,300 mm, fuel: diesel, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 11,100 mm, total width: 2,550 mm, loading space length: 6,940 mm, loading space width: 2,490 mm, loading space height: 1,200 mm, Year of construction: 2018, Equipment: ABS, AdBlue, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, retarder, seat heater, traction control, = Additional Options and Accessories = - Electric power steering - Remote central locking - Refrigerator - Leather interior - Lift axle - Air suspension - Engine brake - Hub reduction - PTO - Radio - Rear view camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Hiab 548E-9 4 x hydraulic outriggers. 9 x hydraulic extension. Radio remote control. 2.20 m - 18,000 kg. 4.70 m - 9,600 kg. 6.20 m - 6,900 kg. 7.90 m - 5,100 kg. 9.70 m - 3,900 kg. 11.50 m - 3,100 kg. 13.50 m - 2,500 kg. 15.60 m - 2,060 kg. 17.60 m - 1,760 kg. 19.70 m - 1,540 kg. 21.70 m - 1,380 kg. Loading box: 694 cm x 249 cm. Loading height: 120 cm. Trailer coupling. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80R22.5; Double tires; Tire tread depth left inner: 15%; Tire tread depth left outer: 15%; Tire tread depth right inner: 15%; Tire tread depth right outer: 15%; Suspension: Air suspension Rear axle 2: Tire size: 295/80R22.5; Double tires; Tire tread depth left inner: 15%; Tire tread depth left outer: 15%; Tire tread depth right inner: 15%; Tire tread depth right outer: 15%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Weights Kdjdpfx Adsx Ngfxolot Unladen weight: 22,775 kg Payload: 14,225 kg GVW: 37,000 kg Functional Crane: Hiab Interior Upholstery: Leather Financial Information Price: Upon request Identification Model number: FH 540 / 8x4*4 / HIAB 548E-9 CRA = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the texts provided.