Used Ctp Plate Stacker for sale (14,091)

Condition: used, Wide-track high-lift truck, pedestrian stacker, drawbar stacker HANSELIFTER - Hanse-Lifter, Model E-SDJ1016-01 Wide-track lift truck Standard model. Year of manufacture: 2014 Rated load capacity, drawbar stacker: 1000 kg Load capacity, special attachment GIESLER: 200 kg Rated lifting height: 1600 mm Fork length: 530 / 770 mm Fork carriage width: 950 mm Ground clearance under wheel arms: 130 mm Operating voltage, hydraulic unit: 12 volts Overall height: 2160 mm Overall length: 1650 mm Overall width: 1860 / 1200 mm Gujdpfshxvuwsx Akaeg - Manual drive operation - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1650 mm (width between wheel arms) - 1 piece, 12-volt battery - Separate charger, 12 volts, 15 amps - Fork base carrier on lifting frame made of steel - Fork carriage, special attachment GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Fork tines made of stainless steel, total length 770 mm to pivot plate - Fork tines cannot be lowered to the ground due to the special attachment (approx. 170 to 250 mm depending on track width) Self-weight: 485 kg Like new condition

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: Gujdpfx Ajyuuzdokaog • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 625 rpm, spindle diameter: 200 mm, table load: 1,00,000 kg, SCHIESS AR-601/142 – completely overhauled in 2014 Key technical data: X-axis (longitudinal travel of the table): 12,000 mm Y-axis (vertical travel): 4,050 mm Travel of the drilling spindle: 1,600 mm Travel of the milling spindle: 900 mm Spindle diameter: 200 mm Spindle power: 91 kW Spindle speed: 1.18–625 rpm Machining capacity: Max. drilling diameter: 1,600 mm Max. machining diameter: 3,000 mm Load capacity: 120 tons Rotary table: Diameter: 3,000 mm Max. load: 100 tons Included accessories: Steady rest Gsdpfozy Hnxsx Akaeug Clamping plates: 2 pieces – 8 x 5 m 1 piece – 6 x 3 m Angle plates

Condition: good (used), Year of construction: 2016, Rima Logstacker 610 Rima Palletizer 655 Year 2015 / 2016 Product Formats Head: 100 - 320 mm Spine: 180 - 500 mm Product Thickness 4 Pages 57 g/m² to 128 Pages 57 g/m² Compressed Log Length Standard: 800 - 1,200 mm High-Speed (HS): 1,000 - 1,200 mm Heights Infeed Height: 600 - 800 mm Delivery Height: 900 mm Product Orientation Spine Leading Speed Standard Cycle Time: Approx. 27 sec High-Speed Cycle Time: Approx. 25 sec Cycle time depends on product type and log length. Input power 400 V, 3~, N, PE 50/60 Hz 40 A 15 kW (Log Palletizer) + 3 kW Gedpfoz Aa Rrox Akasug Air Requirements 110 l/min 6 bar (87 psi) Equipament Straight infeed delivery to left automatic board despencer automatic strapping unit Automatic Pallatizer

Condition: like new (used), Year of construction: 2008, Suprasetter A75, 4up Gsdpeyw N Tbefx Akasug Manufactured: 11/2008 2 laser heads, GEN II 2400 dpi, up to 22 plates/hour Bacher Punch Min plate size: 240 x 240 mm Max plate size: 676 x 760 mm With Prinect 7.51 Installed on DELL PC With Stacker Advant 36 Also available with SCL

Condition: good (used), Built in: 2000 Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 7.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment • belt feeding • automatic infeed with integrated pre stacker • make-ready system Gusdpfx Aoxxi Npjkajg • silicone spraying device • external knife changing device Equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: reconditioned (used), Now in stock at Glendale we have this Morgana Major Folder. This Morgana Major is in perfect working condition having been refurbished by a Morgana trained engineer. It includes a recently replaced new motor and rollers. The sheet count is very low at just 283,000 sheets. This Major folder also includes the perforation and scoring unit. The Morgana Major has been designed to offer a wide range of ‘big machine’ features within a compact and easy to operate design. Changing from one size to another, or for different folds, can be accomplished in seconds. The Morgana Major incorporates counting and batching, with perforating and scoring as standard. A number of unique features have been developed to ensure that the Morgana Major can handle output from digital processes, as well as litho printing. The fold rollers are extremely durable and have the ability to handle a wide variety of stock without adjustment. Not affected by paper dust, their unique composite material will positively grip high gloss papers or work from digital print engines. The Dial-a-Fold plate settings enable all adjustments to be made without removing the covers. An LED display, accurate to 0.1mm, shows the fold plate position and allows easy and accurate repeat job settings. A powerful suction feed handles a wide range of coated or non-coated material and incorporates side lay alignment of the sheets before they enter the fold plates. The feed table also has a suction chamber to control curled or statically charged paper. A larger sheet size of 365mm width and 648mm length makes the Morgana Major even more flexible, capable of producing 6pp A4 documents. The machine speed is fully adjustable from 4500 to 27,500 sheets per hour, giving the operator complete control over the production of a wide range of stocks. The plug-in perforator/scorer is included with this Morgana Major and work is delivered into a catch tray. Key Product Features • Powerful suction feeder handles a wide range of paper weights • Side lay alignment of the sheets, prior to folding • Low pressure suction chamber to control curled paper before it enters the fold rollers • Fully enclosed fold plates with ‘dial-a-fold’ and LED display, fitted with anti-static brushes, skew and micro adjustments • Plug in perforating and scoring attachment • Variable speed • Tray to catch work when perforating or scoring • Long delivery belt stacker • Counting & batching • Double sheet, anti jam detector Specifications Manufacturer Morgana Model Major Folder Condition Refurbished Stock Number 114925 Max sheet size 674mm x 365mm Min sheet size 148mm x 140mm (94mm with optional narrow sheet attachment) Max paper weight 240gsm (grain direction depending) Min paper weight 56gsm Feeder capacity 500 sheets 80gsm Feeder Suction Feed Speed 4,500 to 27,000 per hour Perforating & Scoring Attachment included Power requirements 240v 50/60hz Machine weight 120kgs Gsdpev Hr D Nsfx Akasug Dimensions (L)1168mm x (W)493mm x (H)990mm

Condition: ready for operation (used), Year of construction: 2010, Brand: Komatsu Model: CNI 14 Gedpfezx Sdcsx Akaeug Year of manufacture: 2010 Lifting capacity: 2000 kg Lifting height: 4255 mm Mast lowered height: 189 cm Fork length: 95 cm Machine weight without battery: 1071 kg Includes external charger The Komatsu CNI 14 is the ideal electric stacker for moving pallets weighing up to 2000 kg. With its double stacking function and lift/lower capability, it is perfect for warehouses, logistics operations, and distribution centers.

Condition: excellent (used), Year of construction: 2006, operating hours: 11,533 h, travel distance X-axis: 8,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 160 mm, table load: 80,000 kg, table length: 8,000 mm, table width: 4,000 mm, overall weight: 65,000 kg, grinding spindle motor power: 41 W, Equipment: rotational speed infinitely variable, JUARISTI MX-7 RAM CNC – CNC BORING AND MILLING MACHINE, FLOOR-MOUNTED DESIGN Manufacturer: Juaristi Model: MX-7 RAM Year of Manufacture: 2006 CNC Control: Heidenhain iTNC 530 Travel Ranges - X-axis: 8,000 mm - Y-axis: 4,000 mm - Z-axis (RAM / Slide): 1,000 mm - W-axis (Spindle Stroke): 800 mm Mounting Plates / Base Plates - Mounting Surface: 8,000 × 4,000 mm - Maximum Table Load: 80,000 kg Main Spindle - Spindle Diameter: 160 mm - Tool Holder: SK 50 (ISO 50) - Main Motor Power: 41 kW - Maximum Torque: 2,024 Nm - Spindle Speed Range: - 5–1,182 rpm (low speed range) - 1,182–2,500 rpm (high speed range) Gujdpfx Aoz Aplrskajg CNC & Drives - CNC Control Heidenhain iTNC 530 - Siemens Feed Motors - Absolute Heidenhain Measuring System Tool and Head Equipment - Automatic Tool Changer (ATC) with 30 positions - Automatic clamping system for RAM accessories - Manual swivel head Cooling System - Internal cooling through the spindle - External cooling system Mechanical Equipment - Hydraulic-electronic RAM compensation system - Independently vertically adjustable operator platform - Chip conveyor - Complete enclosure / complete protective guard Documentation - Complete original machine documentation available

Condition: good (used), Year of construction: 2016, operating hours: 12,485 h, load capacity: 1,400 kg, lifting height: 4,716 mm, mast type: triplex, construction height: 2,065 mm, empty load weight: 1,600 kg, mileage: 12,485 km, Electric three-way reach truck Brand: Still Year of manufacture: 2016 Capacity: 1,400 kg Lifting height: 4,716 mm Mast height (lowered): 2,065 mm Guodpfx Aoz Ailfokaeg Hours: 12,485 hours Free lift Battery with charger Automatic filling system Video to follow

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm Gsdpfszxt Trex Akajug weight 3,8 t

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Gedpfjzvd U Ijx Akajug Year: 1999 - Case pre-stacking conveyor - Feeder for cases - Case bending station: DBA - Foil transporting device - Case set up outside machine - Matrix plate 2 - Counter stacker

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: PJ000016, (processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Guedpfx Aevw Afxokaog Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, external compressed air supply required XXX – suction device for removing plate particles Workstation MetaDimension 4/8-up Prinect SignaStation 1.5 74 Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Gsdpfxjixqg Ns Akasug Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, This listing is for a second-hand Konica Minolta accessory: the ‘Konica Minolta LS-507 Stacker’ Compatible with various Konica Minolta AccurioPress models (code WY1) Condition: This is a second-hand item, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Gedpfx Aksy R Ntbsajug For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Pallet feeder PF Touch screen Navigation with auto set plates rollers 4 plates Gusdpjyx Nltjfx Akajg 2 knives Side pocket heidelberg presser stacker delivery

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Gujdjz Akfyspfx Akasg Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: used, BONAK 2000 x 12 mm Cut to length line This heavy-duty BONAK Cut-to-length line is designed for processing hot-rolled steel coils with high reliability and precision. Built for demanding industrial applications, this CTL line is capable of handling material up to 12 mm thickness and widths up to 2060 mm. Manufactured by the well-known Spanish builder BONAK, the line is currently in operation. Main technical specifications - Manufacturer: BONAK (Spain) - Model: 2000 x 12 mm - Material: Hot-rolled steel - Material tensile strength: 40 – 45 Kg/mm² - Strip width range: 650 – 2060 mm - Thickness range: 3 – 12 mm - Maximum coil weight: 20 tons - Maximum working speed: 25 m/min - Working direction: Left to right Scope of supply The complete line includes: - 20-ton loading carriage - Double cone decoiler - Automatic centring device - Coil opener and pulling rolls - Leveller with driving unit: 11 rolls, Ø 110 mm - Measuring wheel - Edge trimmers - Edge guiding system - Scrap recoiler - Intermediate rolls table - Pulling rolls - Hydraulic start/stop shear - Measuring table - Stacker Advantages of this CTL ✓ Suitable for heavy-gauge hot-rolled steel processing ✓ Robust and reliable BONAK construction ✓ Complete levelling and shearing solution ✓ Integrated edge trimming and scrap recoiling system ✓ High-capacity 20-ton coil handling ✓ Ideal for steel service centres and plate processing operations ✓ Line currently installed and operational This machine offers an excellent opportunity for companies looking for a cost-effective and dependable cut-to-length solution for thick hot-rolled material processing. Machine available subject to prior sale. Inspection can be arranged upon request. Strip width range: 650 – 2060 mm Gedpfx Asy Uhybokaoug Thickness range: 3 – 12 mm Maximum coil weight: 20 tons Material: Hot-rolled steel Maximum working speed: 25 m/min Working direction: Left to right

Condition: used, Year of construction: 2009, operating hours: 17,469 h, load capacity: 45,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,810 mm, gearing type: automatic, Equipment: cabin, head guard, COMING SOON!!! CVS Ferrari F478 Reach Stackers Technical Vehicle Data* Manufacturer: CVS Ferrari * Type: F478 * Drive Type: Diesel * Load Capacity (LSP): 45,000 kg * Operating Hours: 17,080 hrs. * Year of Manufacture: 2009 * Tare Weight: 7,100 kg ----Mast Data / Dimensions:* Mast: Telescopic * Lifting Height: 16,020 mm Gusdpfx Ajy D Dmiekasg * Overall Height: 4,810 mm ----Engine, Transmission & Performance:* Engine: Scania DC1258A * Transmission: Torque Converter * Power: 257 kW ----Tires:* Front Tires: Air Dual, Size 18.00-25, Condition 40-60% * Rear Tires: Air Single, Size 18.00-25, Condition 60-80% ----Equipment & Attachments:* Attachment: Side Shifter 20/40, Hydraulic Spreader * Special Equipment: Full Cab ----Vehicle Number/Vehicle: 12015----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financingApplication for export license platesVehicle transportRegistration of vehiclesRecovery and vehicle transport----?YOUR VTS TEAM

Year of construction: 1993, condition: good (used), Built in: 1993 Size: max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: Gusdpfx Asdycmdjkaeg max 6.600 c/h Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter • external knife changing device • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 300 h, load capacity: 1,600 kg, lifting height: 2,920 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,250 kg, total height: 1,915 mm, total length: 1,950 mm, total width: 800 mm, fuel: electricity, STILL EXV 16 – Electric pedestrian stacker Guodpsz Ap Iysfx Akaog TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 2.920 mm Closed height: 1.915 mm Free lift: 1.400 mm Mast: Duplex (2F292) Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 250 Ah v. 2018 Charger: Einphasig 24 V 30 A not tested Tyres: Polyurethan Poly Service weight: 1.250 kg Length: 1.950 mm Width: 800 mm Year of manufacture: 2018 Operating hours: 300 h Condition: ready to drive EQUIPMENT Pulse control Internal no.: 1309289 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical Godpfxszzn A Tj Akaoug SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Stacker ST 95EX Available: at short term Guodpfx Aoyt I Unskasg

Condition: good (used), Chain hoist ABUS GM 4 500.8-1 Used, manufactured in 2018, in very good condition, see pictures. The unit was used for approximately 1.5 years in a food processing company during a trial run! Load capacity: 500 kg Lifting height: 10 m / chain length Lifting speed: 2 – 8 m/min 0.90 kW With wireless remote control 18 units available. Negotiable price: €1,500.00 net ex works No charger for the wireless remote control is included, and no documentation (inspection record, type plate) is available for the ABUS unit. Dismantling will take place from April to June 2024. Location: Northern Italy. Inspection possible by appointment. Further information available upon request. Partial sale possible. Systems will be professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Installation and programming can be carried out by partner companies. EVERYTHING MUST GO! - from the location, latest by the end of June 2024!! The following products from the system are also for sale: 300 x Dematic Multishuttle DMS 2 - 31.5 kg 350 m Dematic Sorter Flex Sort Crossbelt SC3 XB 3900 m container conveying system 600 m pallet conveying system 34 x Dematic vertical lift, 11 m height – 4 m/s 3 x pallet stacker 4 x palletizing systems, Schwingshandl 2 x pallet stations, Autopall, Schwingshandl 20 x pallet stations, Manpall, Schwingshandl 18 x pallet lifts 4 x Dematic pallet stations 14 x pallet wrapper, Unitech UNI WRAP 200A + 900 A 25 x container stacking system, Schwingshandl 35 kg 8 x labeling machines 20 x weighing stations 200 x system control cabinets Partial sale possible! (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex works.) Guedpotuuxrsfx Akaeg Lenox Trading – Top used and new warehouse technology & heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 of its own employees, Lenox Trading is one of the largest dealers in new and used warehouse technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY CLEARANCE: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & DISPOSAL For dismantling and clearing projects, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of goods, equipment & complete inventories including thorough clearing. 2. Commission auction: Conducting auctions on behalf of clients.

Condition: good (used), Year of construction: 2019, operating hours: 11,758 h, load capacity: 1,400 kg, lifting height: 4,716 mm, fuel type: electric, construction height: 2,065 mm, empty load weight: 1,600 kg, mileage: 11,758 km, Electric triple-mast stacker Brand: Still Year of manufacture: 2019 Capacity: 1,400 kg Lifting height: 4,716 mm Gujdpszz S Sxjfx Akaog Mast height (lowered): 2,065 mm Hours: 11,758 hours Freelift Battery: LI-ION with charger, maintenance-free Video to follow