Used Degraf Concept 201C for sale (644)

Condition: used, mileage: 214 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2029, color: grey, gearing type: automatic, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,200 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, navigation system, High-roof panel van, new vehicle, immediately available, Urban special model 5-year manufacturer's warranty from the date of delivery, max. 100,000 km Exhaust system Euro 6 e (EC) All-wheel drive 4x4 8-speed automatic transmission 4x4 130 KW (LD) Start/Stop system with brake energy regeneration One towing eye at the front Tow hitch, fixed L3 standard Fuel tank 75 l Suspension, damping basic and stabilization basic Rear axle differential lock, manually engageable, mechanical Approved as a 3.5-tonne vehicle Front axle, load capacity 1,800 kg Front axle weight, version 2 Hubcaps for alloy wheels 4 alloy wheels 6 1/2x17 with 1200 kg load capacity in black Tires 235/60R17 C 117/115 R, rolling resistance optimized Tire repair kit, 12-volt compressor and tire sealant All-season tires Battery 520 A (92Ah) AGM battery (520A 92 Ah) and generator Operating voltage 12 V Immobilizer, electronic KFG Alternator 140 A Manual air conditioning Climatic in the cab Daytime running lights with assistant driving lights Halogen double headlights LED interior lighting concept in the passenger/cargo compartment Fog lights including cornering lights Exterior mirrors, electrically adjustable and heated Exterior mirror, left, convex with integrated LED turn signal and wide-angle area Exterior mirror, right, convex with integrated LED turn signal and wide-angle area H3 high roof, painted in vehicle color Grab handles on the rear pillars Rear double doors without window openings Radiator grille, black with chrome trim Hinges for rear double doors Windshield wipers, intermittent operation with light and rain sensor Lettering for type, tonnage and horsepower Sliding door, right Laminated windshield with heat-insulating glazing Front bumper in gray with painted decorative trim in vehicle color Airbag for driver and passenger, with passenger airbag deactivation Roof gallery with storage compartments, two 1-DIN compartments and reading light Sun visors, foldable and pivoting sideways Electronic parking brake Interior noise damping measures, premium Glove compartment with lockable flap, illuminated Safety interior mirror, dimmable Left-hand drive Leather multifunction steering wheel with Tiptronic 12 V socket, cup holder Three-point automatic seat belts with height adjustment 12 V socket in the cab on the instrument panel Seat belt control, E-contact in the seat belt buckle 2 remote key fobs Keyless GO Seat, Comfort, left Passenger double seat, right with storage compartment Cjdpfx Aijz Ddnhj Ssrh Seat covers, artificial leather mesh, palladium, titanium black, pearl gray Tachograph (Smart TCO 2.0) with Toll Collect preparation with DSRC antenna Console on the instrument panel for tachograph or special installations Digital instrument cluster Tire pressure monitoring system USB Type C data and charging port with increased charging power 4 speakers, 2 tweeters, 2 woofers MAN Media Van (10.4 inches) Digital radio reception DAB + MAN Smart Link MAN Connect (call services) with OCU 3 low 3-button module Comfort telephony without external antenna connection Hill start assist Emergency brake assist ESP with electronic differential lock, ASR and ABS Parking assist system (PDC) front and rear Cruise control Traffic sign recognition Rear view camera system with dynamic guidance lines Attention and fatigue warning system with driver monitoring Crosswind assist Active lane keeping assist Intelligent speed assist Multifunction front camera Wood floor in the cargo area with wheel arch cladding Grab handle

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces, such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate that serves as a measuring table, with a laterally mounted guide system, enabling open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Cjdpozz Hywofx Ai Sorh Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary-tilt head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 µm+ (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery: Without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unobstructed Accessibility: Due to the lateral guidance of the horizontal arm, the measuring table is freely accessible, which facilitates the placement of heavy workpieces using a crane or forklift. Multi-Sensor Capability: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs on request!

Condition: new, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 206 kg, warranty duration: 24 months, temperature: 155 °C, Technical specifications: Current type (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 600 - 1300 Working pressure (bar): 30 - 200 Crodpfx Aiswglr So Ssh Temperature (°C): 80 - max. 155 Full load heating oil or gas consumption (kg/h): 9.5 Eco!efficiency heating oil consumption (kg/h): 7.6 Connected load (kW): 9.5 Connection cable (m): 5 Fuel tank (l): 25 Weight with accessories (kg): 206 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: Hand spray gun: EASY!Force Advanced High-pressure hose length: 10 m High-pressure hose type: Longlife High-pressure hose specifications: DN 8, 400 bar Spray lance: 1050 mm Power nozzle Servo Control Features: Pressure shut-off Option for dual-spray lance operation Pole reversible plug (3-pole) Soft damping system (SDS) 2 detergent tanks Dry-run protection Operational reliability: An easily accessible water filter protects the pump from particles in the water. Safety valves, low-water protection, and fuel safety devices ensure the machine's availability. The soft damping system (SDS) compensates for vibrations and pressure peaks in the high-pressure system. Accessory storage directly on the machine: All accessories can be stored directly on the machine. There are two hooks for the suction hose and power cable. Spacious storage compartment, e.g., for detergent, gloves, or tools. Detergent dosing: Easy switching between detergent tanks 1 and 2. Precise detergent dosing with rinse function. Mobility concept: Jogger-style design with large, rubber-tired wheels and a swivel caster. Integrated tipping tray for effortless transport over steps. Push handles for easy transport and maneuverability. Simple controls: One switch for all device functions.

Condition: new, Year of construction: 2026, Offer "Comfort Model": * Cjdeiwxfiepfx Ai Ssrh Equipped with a 4-axis rear stop, BendGuard, CNC-controlled wedge compensation, standard tool set, and hydraulic upper tool clamping – ensuring that tool changes are quick and easy. *The images shown are examples and may not reflect the standard scope of the offer. Please contact us for offer details and further information. About the machine: Do you want to enter the world of TRUMPF bending technology while covering a broad spectrum of possibilities? Then the TruBend 1000 is the ideal machine for you. The focus here is on the essentials: reliability, ease of operation, high precision, and, of course, the highest TRUMPF safety standards. With its robust system design, high-quality components, and an easy-to-understand programming system, the TruBend Series 1000 offers ideal conditions for your entry into the TRUMPF bending world. It is ideal for bending box-shaped parts in small and medium batch sizes. Direct and intuitive operation With the TRUMPF control system, numerical and graphical programming is quick and easy. Precise bending Thanks to the 4-axis rear stop, you can position and bend even complex components with precision. TRUMPF quality All over the world, our fast remote service support takes care of your concerns. You can find further technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our 100-year company history, we have been involved in the design of many thousands of sheet metal products, especially in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts for software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We are also happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are at your side with both financial and entrepreneurial challenges.

Condition: used, mileage: 89,651 km, power: 78 kW (106.05 HP), first registration: 02/2013, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 C30C is a used van with an automatic transmission and a mileage of 89,651 km. The vehicle was first registered on February 12, 2013, and is powered by a reliable 2,287 cc diesel engine with an output of 78 kW (106 hp). It complies with the Euro 5 emissions standard, making it environmentally friendly and economical, with a combined fuel consumption of 7.9 l/100 km. It measures 6,783 mm in length, 2,177 mm in width, and 2,770 mm in height, with a wheelbase of 3,750 mm and a total payload of 3,500 kg. Credswfg Acopfx Ai Ssh The van impresses with its practical features, including a rearview camera, which makes maneuvering easier. The interior offers optimization options for the loading area thanks to the air passage and shelves for additional storage space. The yellow paint finish and the Category 4 (green) environmental sticker complete the vehicle concept. The Iveco Daily has two seats and four doors and is particularly suitable for commercial purposes such as agriculture or export. The vehicle can be viewed Monday to Friday between 8:00 a.m. and 5:00 p.m. and Saturdays between 9:00 a.m. and 2:00 p.m. in Rohrbach (Palatinate). Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG056013, overall weight: 120 kg, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb reject system Manufacturer: HEUFT Systemtechnik GmbH Offered are components of an industrial HEUFT system for automatic full-product inspection and defect rejection in filling and/or packaging lines. Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closures, labels, and other quality characteristics Automatic product tracking Connection of reject systems for removing defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Crodpfx Aiezwmkzo Ssh Manufacturer's stated series performance: up to 72,000 containers/h* Reject system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment reject system 16 segments Design: left / Left For the automatic removal of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The unit is new and unused, and has only been unpacked for a completeness check.

Condition: new, functionality: fully functional, Year of construction: 2026, SENFENG SF6012 PLUS – 3kW Fiber Tube Laser Cutting Machine High productivity, efficient material handling and maximum material utilization The SENFENG SF6012 PLUS is a high-performance fiber laser tube cutting machine designed for efficient series production of small to medium-sized tubes and profiles. Equipped with a 3,000 W MAX Photonics fiber laser source, semi-automatic tube loading and the advanced T PLUS overtravel cutting concept, the machine combines high cutting performance with efficient material handling and minimal residual material. Available for viewing, demonstrations and test cutting in our showroom from October 2026. Why choose Besten Machines? ✔ Over 25 years of experience in metalworking ✔ Locations in the Netherlands and Germany ✔ Own Dutch and German service engineers ✔ Installation, commissioning and operator training ✔ Technical support and spare parts availability ✔ More than 70 SENFENG machines successfully installed Machine Configuration 3,000 W MAX Photonics fiber laser source BOCI autofocus 2.5D laser cutting head FSCUT3000DE-A CNC control system Cooling system for laser source and cutting head Power stabilizer Semi-automatic loading system up to 6.5 m Loading capacity for up to 5 tube/profile positions Unloading station with 2 m conveyor Optional 3–4 m conveyor TubesT 3D tube nesting software Fully enclosed, CE compliant Technical Specifications Model: SF6012 PLUS Laser power: 3,000 W Laser wavelength: 1060–1080 nm Tube length: 1,000–6,500 mm Credpezwquqofx Ai Soh Round tube: Ø15–Ø120 mm Square tube: 15×15–120×120 mm Maximum tube weight: 120 kg Maximum acceleration: 1.5G Maximum rapid speed: 150 m/min Maximum chuck speed: 240 rpm Positioning accuracy X/Y: ±0.4 mm Repeatability X/Y: ±0.4 mm Power supply: 3×380 V / 50 Hz Protection class: IP54 Dimensions incl. loading system: approx. 9,100 × 2,230 × 2,300 mm Machine weight: approx. 3,400 kg Key Features T PLUS Overtravel Cutting The movable front chuck enables overtravel cutting, minimizing residual tube length and maximizing material utilization. Semi-Automatic Loading Loading system with up to five tube/profile positions for material lengths up to 6.5 m, reducing manual handling while maintaining production flexibility. Servo-Controlled Tube Support Active supports reduce sagging and vibration during processing, improving stability and cutting accuracy. FSCUT & TubesT Software Integrated CNC control combined with 3D nesting software for efficient programming, automatic nesting and material optimization. Automatic Unloading Finished parts are discharged via conveyor for controlled and efficient material handling. Applications Suitable for processing carbon steel, stainless steel and aluminium tubes and profiles. Ideal for machine construction, steel fabrication, furniture production, automotive components, agricultural machinery and general series production. Showroom & Service The SF6012 PLUS 3kW will be available in our showroom from October 2026 for demonstrations and test cutting. Besten Machines provides installation, commissioning, training and after-sales service through our own service team in the Netherlands and Germany. Contact us for a quotation or demonstration. Send us your drawings and material specifications and we can perform a test cut for your application.

Condition: used, Year of construction: 2018, operating hours: 114 h, functionality: fully functional, machine/vehicle number: 020559, working width: 1,450 mm, area performance: 10,150 m²/h, overall weight: 420 kg, tank capacity: 100 l, total height: 1,450 mm, total width: 1,250 mm, total length: 1,800 mm, gradeability: 18 %, fuel type: gas, fuel: liquid petroleum gas (LPG), For sale is a Kärcher KM 105/110 R LPG, manufactured in 2018. This sweeper was used to clean our warehouse and has 114 operating hours. The machine is in excellent technical condition and runs without any problems. Unfortunately, it does show some signs of wear and tear. The KM 105/110 is being replaced in our warehouse by a smaller sweeper, which is why we are selling it. The Kärcher KM 105/110 is a ride-on sweeper with Tact filter cleaning, automatic adjustment of the main sweeping roller wear via a teach system, and a new sweeping concept. The sweeper is equipped with 2 side brushes and a sweeping roller. Thanks to the brushes and the roller, manual sweeping is no longer necessary. All dirt is swept up cleanly by the brushes and the roller, even in corners. The highly effective and automatic Tact filter cleaning system ensures permanently clean pores, thus providing an optimal cleaning result. The filter elements have an automatic cleaning function, which has a positive effect on the machine's performance. Cedpfxozvaxvo Ai Serh The teach system ensures automatic correction of the sweeping roller in case of wear. The KM 105/110 has three adjustable contact pressures, which can be easily activated by pressing a button. In Eco mode, wear is reduced even further. Technical data: Drive system: hydraulic Drive type: gas Max. area performance (m²/h): 7350 Max. area performance with 2 side brushes (m²/h): 10150 Working width: 640 mm Working width with 2 side brushes: 1450 mm Sweeping material container: 100 l Climbing ability: 18 % Working speed: 7 km/h Weight (ready for operation): approx. 420 kg Dimensions (L × W × H): 1800 × 1250 × 1450 mm Additional features: - Forward and reverse drive - Hour meter - Coarse dirt flap with a dirt basket that can be emptied mechanically at the push of a button (see video) - Suitable for outdoor use - Kärcher Intelligent Key - Multifunction display - Overhead sweeping principle The Kärcher KM 105/110 is in stock at our warehouse and can be inspected at any time. Demonstrations can also be arranged at our premises. Please make an appointment with us in advance. The machine should be picked up from our warehouse. If a pickup is not possible, we can also arrange for the machine to be shipped. An 11 kg gas cylinder is not included in the scope of delivery. Gas can also be purchased from us as needed (only when picking up the machine!!).

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Codpfx Aiozu S U Hs Sorh Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, mileage: 4,14,973 km, power: 390 kW (530.25 HP), first registration: 02/2020, fuel type: diesel, empty load weight: 9,775 kg, maximum load weight: 16,225 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 2,650 mm, next inspection (TÜV): 02/2027, color: blue, driver cabin: other, gearing type: automatic, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, onboard computer, parking heater, traction control, Color: Cobalt Blue MB5513, unladen weight: 9775 kg, permissible total weight: 26000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, 3rd axle: 315/70 R22.5, seats: leather, air suspension, 1 x airbag, digital tachograph, fifth wheel coupling, auxiliary drive: MB 131-2c, ASR traction control, automatic climate control, auxiliary air conditioning, driver's comfort seat, driver's seat with air suspension, driver's seat heating, radio, lane keeping assist, rain sensor, leather steering wheel, power steering, adjustable steering column, outside temperature display, fog lights: LED, electrically adjustable exterior mirrors, curb mirrors, wide-angle mirrors, immobilizer, central locking, underrun protection, sun visor, comfort package, cooler box, rotating beacon, axle load display, work lights, hill start assist, daytime running lights, connector: 1x15-pin, cup holder, safety package: Saftey Package MB, floor covering: rubber, insulated cab, speed limiter, wide tires, trailer brake connection (pneumatic), lower bunk, sprung cab, High Performance Break front axle, steerable and liftable, air horns Solostar Concept, distance control assistant, attention assist, Active Brake Assist 4, non-binding offer, subject to errors and prior sale. Illustration may not match the offer. Codpfx Aozl In Rsi Serh

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 250 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Industrial Powder Coating Ovens – Flexible Designs, Sizes & High-End Upgrade Options Are you looking for a powerful, reliable, and efficient curing oven for your powder coating process? We provide customized solutions for every application – from compact chamber ovens to fully integrated conveyor systems! Versatile designs for every process: No matter how your production is organized, we offer the right oven concept for your material flow: - Chamber ovens: Classic design with single-sided doors for batch loading. - Tunnel ovens: Practical pass-through solution with doors on both sides for an optimized loading and unloading process. - Special ovens for conveyor systems: Specifically designed ovens for continuous production processes, perfectly adapted to automatic conveying technology with a conveyor chain. - Flexible door systems: Depending on space and requirements, optionally equipped with swing doors or space-saving sliding doors. Your oven, tailored to your needs – Standardized performance or 100% custom design: Our standard model range: - Flexible dimensions: Standard internal lengths up to 6.5 m with selectable internal widths of 1.7 m or 1.9 m (standard height: 2.0 m) - Heating according to choice: Fully flexible, available as an electric version or with an efficient gas burner - Versatile loading: Standard preparation for use with rack cars or for integration into a conveying system Individual customized solutions: - Free dimensions & geometries: We manufacture any desired special size, deviating construction heights, or complex spatial geometries exactly according to your specifications - Special heating concepts: Specific burner outputs or adapted heating zones for complex component requirements - Special conveying technology: Tailored integration for integrated overhead conveyor chains, automatic indexing conveyors, or individual crane and lifting systems Smart additional options & upgrades: - Automatic door control: Convenient, automatic opening and closing for sliding doors - Inverter control of the circulating air: When the doors are open, the fan speed is automatically reduced. This prevents the warm air from blowing out, noticeably minimizes energy loss, and saves money. - Temperature curve recording: Complete recording and logging of the curing process for quality and process documentation Cedjfhv Tlopfx Ai Sjrh - Extended sensors & temperature monitoring: All of our ovens have a highly precise, uniform temperature distribution of ±5°C. For the highest quality standards, additional sensors can be integrated upon request to document the homogeneity in the entire oven chamber in detail. Technical highlights of our ovens: Maximum efficiency: High-quality 150 mm rock wool insulation for minimal heat loss Powerful circulating air: High-performance fans for perfect heat distribution and uniform curing results Higher temperature ranges: Maximum operating temperature up to 250 °C Durable & robust: Stainless steel thermo-block with integrated overheating protection and heat-resistant bearings Including control: Complete electrical control included in the scope of supply Contact us! We offer free consultation. We plan and manufacture your powder coating oven exactly as you need it for your production.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. Cedjulwg Nopfx Ai Ssrh - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: Crsdpfx Aijzu Rpio Ssh 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Crjdpfxszzrutj Ai Ssh Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13720-01, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, Eight-Lane Ultra-Clean Cup Filling & Sealing Machine – 15,000 cups/h Fully automatic, eight-lane inline cup filling and sealing machine for dairy products, designed for hygienic production under Ultra-Clean conditions. The machine achieves an output of up to 15,000 cups per hour and is equipped for two cup diameters: Ø75 mm and Ø95 mm. With an optional pre-dosing unit, the machine is also suitable for manufacturing multi-component products. Cjdpfx Ajzz Ngmoi Sorh Side-by-side dosing of two product components within a single cup is possible. Technical data: Output: up to 15,000 cups/h Configuration: 8-lane inline machine Cup diameters: Ø75 mm / Ø95 mm Year of manufacture: 2015 Control system: Schneider-Elau (Siemens upgrade available) Hygienic concept: Ultra-Clean Cup sterilization: UVC Application: Dairy products Machine features: Automatic cup feeding UVC cup sterilization Hygienic product filling Automatic lid application Sealing station Automatic cup discharge Format changeover between Ø75 mm and Ø95 mm Stainless-steel construction Easy access for cleaning and maintenance Suitable for the hygienic filling and sealing of yogurt, cream, desserts, and other dairy products. Further technical information is available upon request.

Condition: used, mileage: 3,30,234 km, power: 390 kW (530.25 HP), first registration: 06/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,300 mm, total width: 2,550 mm, total height: 3,950 mm, loading space length: 6,500 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, Year of construction: 2020, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Flatbed truck with Hiab X Hi Pro 232 ES-6 loading crane, 6x, hydraulic extension up to 16.90m, hydraulic extendable support legs, swivel head, 5th and 6th control circuits, remote control. Axle load - measuring device Axle load front axle 8.0 t Trailer stabilization program TSA Equipment package: Climate control, automatic climate control Additional thermal insulation Battery 220 Ah (AGM) Equipment package: Comfort, illuminated Mercedes star Sliding/tilting sunroof, electric (glass) Cooler box / refrigerator PremiumComfort mattress, lower bunk Switch for MirrorCam on the bed Ambient lighting, LED (driving and living) Equipment package: Media Equipment package: Safety Airbag, driver's side Exterior mirror base, MirrorCam, chrome / vehicle color Bi-Xenon headlights Brake connection, standard and DuoMatic CB radio Air horns (2) on the driver's cabin roof Electrical pre-wiring in the driver's cabin, 24V / 100 A Driving assistance system: turning assistant Driver's cabin: shaving mirror Vehicle without underbody cladding, aerodynamically shaped Gearbox 12-speed - Type: G 281-12 Holder for laptop Urea tank (AdBlue): 75 liters Rear axle, bevel gear 440 Comfort telephony (Bluetooth) with inductive charging cradle Comfort upper bunk, wide Fender, 3-part Fender, 3-part with splash guard Fuel tank: 630 liters, aluminum, left side Cooling capacity for hot climates Steering oil cooler Air intake, integrated Air compressor, 2-cylinder Engine brake, reinforced Auxiliary drive MB 123-10c Parametric special module PremiumComfort mattress, upper bunk Frame lowering with airbag pressure regulation Frame overhang 2550 mm Retarder Headlight cleaning system (SRA) Drawer under the dashboard Circuit breaker Seat cover / upholstery: co-driver seat, velour Seat cover / upholstery: driver's seat, velour Seats in the driver's cabin: driver's seat, comfort sprung seat Seats in the driver's cabin: SoloStar Concept Sun visor, exterior Sound system, steel rims 11.75x22.5 (on the front axle) Storage compartment, exterior, left side 12V / 15 A socket in the co-driver's footwell, additional 12V socket, additional 24V / 25 A socket in the co-driver's footwell Preparation for 4 surround cameras (display in the on-board monitor) Preparation for auxiliary headlights Curtain, sleeping cabin Oil cooler, gearbox Emissions standard EURO 6 D Storage compartment above the windshield with lid Axle configuration: 6x4 Actros 5 Actros driver's cabin L Approach / front mirrors, heated Trailer brake, 2-line Cedpoz Am I Rjfx Ai Sjrh Connections, left side Trailer socket 24V / 15-pin Exhaust, right side, exterior Equipment package: Powertrain 2 Exterior mirror camera, MirrorCam Differential lock, rear axle Compressed air connection in the driver's cabin Compressed air tank, steel Compressed air unit with condensate monitoring Compressed air unit, medium Automatic switching for driving lights (light sensor) Driver's cabin: driver's cabin entrance, fixed Driver's cabin: interior package, chrome Driver's cabin: tilting mechanism, hydraulic Driver's cabin: L StreamSpace, 2.50 m, flat floor Driver's cabin: width 2.50 m Driver's cabin: height 765 mm Door extension for driver's cabin Storage compartment, exterior, right side Tilting roof, electric Bumper corners, front, in plastic Windshield, tinted with band filter Navigation system Remote online function Interactive multimedia cockpit Carpet on the engine tunnel Sun protection roller, side window, driver's door Preparation for comfort upper bunk, wide Radiator grille

Condition: new, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Volkswagen Crafter 35 Panel Van "new model", medium wheelbase 3640mm, front-wheel drive, 3500kg permissible gross weight, with high roof, 130kW/177PS, 6-speed manual gearbox, in Candy White Gross list price: €70,278 including VAT. ---- * 5-year factory warranty up to 250,000 km * 3-seater * Suspension seat "ergoComfort" on the left with weight adjustment, seat cushion tilt adjustment, backrest adjustment, adjustable headrests, 4-way lumbar support electrically adjustable, armrest on the left in the left door panel and adjustable armrest on the right * Double passenger seat with storage compartment and foldable backrest with storage table * Fixed trailer coupling (trailer load 3,000kg) * Air conditioning with manual control in the driver's cab * Heated windshield * LED headlights with LED daytime running lights * Parking assistance system in the front and rear area * Rear view camera with warning indicator (acoustic) when reversing for passing vehicles and pedestrians with emergency braking system * Floor covering in the cargo area: wood with wheel arch trim * Paneling in the cargo area: plastic up to the top * Lashing rails in the cargo area - on the side wall and partition wall * Cargo area partition with paneling * Basic assistance package including "Intelligent Speed Assist" and cruise control system * Infotainment system with 26 cm (10.4") touch-color display, 2 USB-C data/charging ports (center console) with increased charging power and 2 USB-C charging ports (center, windshield), traffic sign recognition, Wired & Wireless App-Connect Car Net for Apple CarPlay and Google/Samsung Android Auto, transfer your apps to the display in the vehicle, for example Google Maps * Digital Cockpit Pro * Exterior mirrors electrically adjustable, separately heated * Spare wheel in driving condition including onboard tools and jack * Rear double doors without window cutouts * Fuel tank with 75 liters capacity * Airbag for driver and passenger with passenger airbag deactivation * Hill start assist * Front Assist with warning and braking on vehicles, pedestrians and cyclists * Multifunction steering wheel * Tire pressure monitoring system (direct measuring) * Lane keeping assistant "Lane Assist" Csdpfxszp S Dke Ai Serh * Stowage package 2: roof console with two 1 DIN compartments and reading light * Central locking "Keyless-Go" without safe lock * Windshield wiper intermittent function with light and rain sensor * Front bumpers with painted trim in vehicle color * Grab handles at the rear, left and right * LED interior lighting concept in the cargo area * Mud flaps at the rear Further equipment: Airbag driver/passenger side, passenger airbag switchable, exterior mirror convex, left, exterior mirror convex, right, turn signal LED integrated into exterior mirror, floor covering in driver's cab: rubber, underbody paneling for Cd value, dual-tone - fanfare, entry handle on rear pillar, left, entry handle on rear pillar, right, driving assistance system: hill start assist, driving assistance system: brake assist (HBA), fatigue detection sensor, driving assistance system: crosswind assist, electric window lift front, windshield laminated glass, remote control (2) foldable, grab handles A-pillars, glove compartment lockable, interior lights in driver's cab: LED, interior lights in cargo/passenger compartment: LED, body/superstructure: panel van high roof, body variant: high roof in vehicle color, fuel tank: 75 liters, radiator grille with chrome strip at the top, steering colum

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens Credpfx Aozaq Ikoi Sjh • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: new, External dimensions: 2300 × 2450 × 2340 mm FGRi series Finish: Mosaic Dome Energy source: wood and gas Total gas power: 43 kW Natural gas consumption: 4.6 m³/h LPG consumption: 3.4 kg/h Gas connection: 3/4” G Capacity: 14 pizzas Ø 30 cm Productivity: 240 pizzas/h Motorized rotating hearth Variable speed and direction Two independent gas burners Separate vault and hearth heating Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation: bricked shell External finish: Mosaic Dome Dual manual/automatic mode Codszabf Topfx Ai Sjrh Manual mode with flame modulator Analog thermostatic controls (optional) Unassembled shipping: not available Mouth width: 820 mm Net weight: 4000 kg General presentation The FGRi150 Coupole Mosaïque is a hybrid wood & gas rotary oven intended for pizzerias, Italian restaurants, franchises, and catering establishments that want to combine high cooking capacity with an elegant presentation. With its Mosaic Dome finish, it is suitable for locations where the oven is visible and contributes to the image of the concept, while maintaining the performance of the largest FGRi format. Why this model stands out This oven cooks 14 pizzas Ø 30 cm and achieves a stated production of 240 pizzas/h. It can operate on wood alone, gas alone, or in a combined wood + gas mode. Its gas-heated, motorized rotating hearth, with variable speed and direction, helps to distribute cooking over a large surface area. The two independent burners, dedicated to the vault and the rotating cooking surface, promote thermal stability when batches are cooked consecutively. Key advantages High capacity of 14 pizzas Ø 30 cm, suitable for high volumes. Stated production of 240 pizzas/h for peak service times. Hybrid operation: wood alone, gas alone, or wood + gas. Gas-heated rotating hearth for even cooking. Mosaic Dome finish with insulating shell and decorative cladding. External drawer for ash disposal and collection.

Condition: used, mileage: 895 km, power: 118 kW (160.44 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,920 kg, maximum load weight: 580 kg, overall weight: 3,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 4, total length: 7,425 mm, number of beds: 4, Equipment: ABS, air conditioning, airbag, bathroom, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, second-hand vehicle warranty, soot filter, traction control, In-stock vehicle available immediately. Financing with an interest rate of 2.99% – also without a down payment. 5-year warranty with financing. Comfort package: comfortable seats for driver and passenger, adjustable in inclination and height, upholstered in fabric. Panoramic sunroof (Medi-Heki) above the living area. Acoustic paneling on the side walls. Fly screen sliding door for the entrance door. Intuitive lighting concept (motion and light sensors). Comfort mattress incl. Lattoflex sleeping system for the rear bed. Driving comfort package: steering wheel and gear knob in leather. Multifunction steering wheel with controls for the radio. Wireless phone charger. Digital cockpit. Multimedia package: navigation system with 7-inch touchscreen incl. tuner with DAB+, Bluetooth. Radio preparation “Basic”, consisting of four speakers incl. antenna FM/DAB+. Rear view camera behind the emblem. Smart LED TV 32 inches incl. triple tuner, Bluetooth 4.2. Alphatronics SAT system TwinTuner for main and bedroom TV. TV preparation in the rear bedroom (pre-wired and connected). Premium package: kitchen unit with Gastro Norm containers for compressor refrigerator drawer. Compressor refrigerator drawer 138L incl. separate freezer compartment 12L and electric central locking. Extended kitchen worktop thanks to pull-out system. Mineral composite surface in the kitchen. Electric kitchen lift with indirect lighting and 230V socket. Fiat Ducato light 3.5t, 160 hp. ZF AT9 automatic transmission. Fog lights in LED. LED main headlights. HELLA system. Exterior mirrors, electrically adjustable and heated, painted in vehicle color. Automatic air conditioning with pollen filter. Start-stop system. Cruise control. Additional garage door on the driver's side. Pull-out storage box on the driver's side. Height-adjustable bed manually with comfort mattress and slatted frame. Sofa on the driver's side can be converted into an L-shaped bench (4 seat belts in total) incl. folding table top and sliding table thanks to floor rail system. Gas external connection Truma DuoControl CS. Outdoor shower in the garage. SOG toilet ventilation. 2nd camera for wastewater outlet. Codpszt Smtjfx Ai Sjrh

Condition: new, Year of construction: 2025, functionality: fully functional, power: 9 kW (12.24 HP), cutting height (max.): 82 mm, saw blade diameter: 315 mm, rotational speed (max.): 4,400 rpm, total length: 3,300 mm, total width: 3,350 mm, overall weight: 3,000 kg, cutting length (max.): 3,300 mm, feed rate X-axis: 100 m/min, feed rate Z-axis: 150 m/min, saw blade speed: 4,400 rpm, saw drive: 9,000 W, Equipment: rotational speed infinitely variable, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | Powerful panel dividing system for highest precision & efficiency The SCHEER PA 4500 is a robust, industrially proven panel dividing saw for the precise processing of coated and uncoated wood-based panels. It was designed for demanding applications and already meets all the requirements of modern cutting operations in its basic configuration. Main technical data: Cutting length (max.): 3300 mm Cutting height (stepless): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scoring motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (stepless adjustable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/stroke Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Cedpfxewrpcxo Ai Sjrh Machine concept & highlights: Heavy cast honeycomb construction for vibration damping Absolute value encoder for highest positioning accuracy (no referencing) Distance- and time-optimized saw carriage operation Automatic oil mist lubrication & blowing of the guides Program-controlled saw blade adjustment (height & scoring side) ProLock quick-release system for the saw blade “wood dust tested” – emission only 0.65 mg/m³ System equipment: 1x angle pressing device WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x material feed table HP 5130 – 33 x 33 Mounted at the back with hardened guides & racks Roller conveyor system for easy panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x angle stop table HP 5137-1-1465 1x workpiece support table HP 5135-1-1465 Pertinax coating, each 1465 x 800 mm 1x air cushion unit LK 5169 central radial fan, pressure max. 2800 N/m² 1x control cabinet dustproof, separately mounted, vibration protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64 bit) (update to the latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel warehouse management, etc.) Network-capable, future-proof, modularly expandable Operating modes & operation: Manual operation: single, chain dimension, trimming, residual cutting Automatic operation: cutting plan processing, online order processing Editor: parts list-based planning & optimization Maintenance & diagnosis: saw blade measurement, individual control, and more 📞 Contact us for an individual offer or a viewing. Delivery, installation, commissioning, and training possible as options.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 08/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * TGE 3.180 4X2F SB Panel Van * 8-speed automatic transmission, front-wheel drive * Reinforced suspension/damping and reinforced stabilizer bars * Disc brakes front, 16" * "ergoActive" driver's seat with suspension * "Comfort" passenger seat * Seat covers in synthetic leather "Mesh" * Heated driver and passenger seats, separately adjustable * Stone chip protection without Efficient Line (no CO2 optimization) * Comfort Package Plus * Daytime running lights with assistant driving lights * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights incl. cornering light * Side marker lights * Heated windshield washer nozzles front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Headliner in the passenger compartment as a molded headliner * Entry handle made of plastic on the B-pillar in the passenger compartment * Child safety lock, electrically operated * Side interior paneling in the cargo area made of hard fiberboard, half-height, with partial window paneling * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assist front and rear * Cruise control * Traffic sign recognition * Rear view camera system with dynamic guide lines * Driver alertness and fatigue detection Codpfx Aiezc Dgxj Serh * Side wind assist * Active lane keeping assist * Intelligent speed assist * With multifunction camera * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG with ABH programming * Alternator 230 A * Air conditioning system "Climatic" in the cab * 2nd battery (AGM battery) with separator relay and battery monitoring * 2nd heater and 2nd evaporator * One towing eye front * Trailer hitch, fixed * Wheelbase standard 3,640 mm (L3) * Mud flaps front and rear * Fuel tank 75 l * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony with inductive charging function, without external antenna connection * Fire Red (R3000) * Exhaust system, EU6e (EC) * Front-wheel drive * 4-cylinder diesel engine 2.0L, aggregate 03N.G * Automatic transmission, 8-speed * 4-cylinder turbo diesel engine 2.0 l/130 kW (4V) BIT * Start-stop system with brake energy recovery * Country cluster "WLTP EU approval" * Airbags for driver and passenger, with passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, anti-glare * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners front * 12-V sockets in the cab * Belt warning system, E-contact in the belt lock, driver and passenger seat * 2 remote key fobs * Keyless start * Auxiliary water heater, with remote control * Chrome package * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color (H3) * Rear step, over half the width

Condition: new, Year of construction: 2026, functionality: fully functional, The Impuls Packaging Cobot is an intelligent automation system designed to move and position products efficiently and precisely. It handles the automatic picking, placement, and arrangement of products on pallets or within packaging units, ensuring a smooth and continuous production flow. Thanks to the integrated automation technology, various packing patterns and workflows can be stored directly in the system and recalled as needed. This enables the Cobot to be flexibly adapted to changing products and production requirements without any setup downtime. A range of gripper options is available for the Cobot, including vacuum grippers (either pneumatically operated or with an integrated vacuum motor) as well as specialized gripping systems for different applications. Together with our German partner in the Frankfurt region, we develop the optimal solution for your product to ensure precise, safe, and efficient handling. The system is operated via a user-friendly interface, allowing for easy setup and control without the need for programming skills. The Cobot’s compact design makes it easy to integrate into existing production lines while requiring very little floor space. Using our Cobot increases process reliability and reduces dependence on personnel bottlenecks due to illness or unfilled shifts, ensuring reliable and efficient production even with fluctuating staff availability. Typically, the Cobot pays for itself within the first year. System Features 1. 6-axis cobot robot for moving and placing products Credpfx Aisyv H T No Ssh 2. Compact, space-saving design 3. Suitable for various pallet sizes 4. Multiple packing patterns can be stored and transferred to other systems 5. Easy operation with a graphical user interface, suitable for unskilled staff 6. Low energy consumption, minimal operating costs 7. Available with a variety of gripper options Technical Parameters 1. Maximum product dimensions: L1200mm, W1200mm, H500mm 2. Maximum product weight: approx. 20kg (depending on gripper weight) 3. Packaging speed: 6–10 palletizing cycles/minute (depending on product and pallet size; up to 32 packs/minute possible with multi-pick) 4. Maximum stacking height: 2000mm (600mm additional lift), arm reach up to 1680mm 5. Pneumatic connection required for operation 6. Connection voltage: 3Ph. 380V 50Hz, DC 24V connection 7. Overall power: approx. 3 kW 8. Machine weight: approx. 600 kg 9. Machine dimensions: approx. 3450x1500x3500mm 10. Noise level: > 60 dB We offer different safety concepts for the Cobot: Safety fence: Physically separates the working area so entry into the operation zone is prevented during operation. Safety sensors: Sensors monitor the working area and automatically stop the Cobot as soon as a person or object enters the danger zone. We are happy to advise you on which concept is best suited to your production. When ordering, you can select one of the systems; the other can be supplied for an extra charge.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Emission standard, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy recuperation * Front towing eye * Preparation for trailer hitch * Fuel tank 75 l * Approved as 3.5 t * Front axle, reinforced * Payload, in black * Engine immobilizer, electronic * 'Climatronic' air conditioning in the driver's cab * Daytime running lights with assist lighting and coming and leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights including cornering lights * Side marker lights * Headlight cleaning system * Windshield washer fluid level indicator, heated windshield washer nozzles * Step illumination * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors, left and right, convex, with integrated LED turn signal and wide-angle view * Grab handles on the rear pillars * Rear wing doors with increased opening angle * Windshield wiper intermittent operation with light and rain sensor * Sliding door, right * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and passenger, with passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium noise reduction measures * Glove compartment with lockable flap, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12V socket, cup holder * Three-point automatic safety belts with height adjustment * 12V socket in the driver's cab (in the instrument panel) * Seat belt monitoring, E-contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right Cedjzxwb Hjpfx Ai Sjrh * Seat covers in fabric 'Toronto Grid' * Heated driver and passenger seats, separately adjustable * Instrument cluster * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inch) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency braking assistant * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system, front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant 'Light Assist' * Attention and fatigue detection * Lane change assistant * Crosswind assist * Blind spot monitoring on both sides and start-up warning * Turning assistant * Emergency assistant (Active Lane Keeping Assist and Emergency Assist and Traffic Jam Assist) Intelligent Speed Assistant * With multifunction camera * Cruise Assist Plus * Grab handle on the partition in the cargo compartment * Tie-down points for securing cargo * Driver Assistance Package * Light & Visibility Package * Comfort Package Plus * Oyster Silver Metallic * Country cluster 'WLTP EU approval' * Preparation for alcohol interlock system * Complete N1 approval (up to and including 3.5 t GVW) * Vehicle with high-quality double cab conversion as a partition/seat combination (n

Condition: used, mileage: 10 km, power: 120 kW (163.15 HP), first registration: 10/2026, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,606 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Oyster Silver Metallic * Exhaust system, EURO VI-E standard * Twin rear-wheel drive * Maximum speed limitation to 90 km/h (cannot be deactivated) * 8-speed automatic transmission * 120 kW (HD) * Start-Stop system with brake energy regeneration * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirror, left, convex, with integrated LED turn signal and wide-angle view * Exterior mirror, right, convex, with integrated LED turn signal and wide-angle view * H3 - High roof, painted in body color * Grab handles on the rear pillars * Rear double doors without window cutouts * Van * Radiator grille, black with chrome trim * Rear double doors with enlarged opening angle * Windshield wiper intermittent function with light and rain sensor * Sliding door, right * Laminated windshield with heat-insulating glazing, heated * Airbag for driver * Roof console with storage compartments, two 1-DIN slots, and reading light * Storage compartment in the headliner * Sun visors, foldable and swiveling sideways * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket, cup holder * Three-point automatic safety belt with height adjustment for driver * 12-V socket in the cab (in the instrument panel) * Seat belt warning, electrical contact in the seat belt buckle, driver and passenger seat * 2 remote control keys * Keyless start * Auxiliary water heater, with remote control * Chrome package * Smart TCO 2.0 with Toll Collect preparation (including DSRC antenna) * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inches) * Approved as 5.0t * Front axle, reinforced * Driver Assistance Package - City * Light & Visibility Package * Comfort Package Plus * MAN SmartLink * MAN Connect * Comfort telephony with inductive charging function * With voice control * Hill start assist * Emergency braking assistant * ESP with electronic differential lock, anti-slip control (ASR), and ABS * Park steering assistant with parking assist (PDC) including flank protection * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant "Light Assist" * Attention and fatigue detection with driver observation camera * Lane change assistant * Side wind assistant * Blind spot detection on both sides and departure warning * Turning assistant Csdpfxozzuuis Ai Serh * Emergency assistant (including active lane keeping assistant and traffic jam assistant) * Intelligent speed assistant * Multi-function front camera * Cruise Assist Plus * Grab handle on the partition in the cargo area * Partition * Lashing eyes for securing cargo * Daytime running lights with assist function and coming and leaving home function * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights including cornering lights * Side marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * One towing eye in the front * Preparation for trailer coupling (without socket and trailer hitch) * L5 - Extra long * Fuel tank 75 l * Immobilizer, electronic * Electrical connect