Used Deutz-Fahr Combine for sale (4,704)

Year of construction: 1998, condition: used, Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife Hfsdpfx Aedmdtbeflek • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: • belt delivery

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment Hfsdsd N D Nijpfx Aflok feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 1997, condition: used, Built in 1997 Hodpfxodmdt Us Afljfk Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention Hsdpfx Afsd E Nbqolofk 3rd folding unit: • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate

Condition: good (used), Rebuilt: 2011 Hsdpfjl Dpc Eex Aflsfk Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 Hjdpfxsqqkx Nj Aflofk - Control system: S7

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA rail-road excavator is a versatile excavator, equipped with a quick coupler and a reliable Deutz engine. The excavator was built in 2013 and has 11,920 operating hours. The machine offers an engine power of 95 kW (129 hp) and a displacement of 4,038 cc. It has a spacious double cabin with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on trams thanks to its narrow axles and special support. Other features include an Eberspächer fuel heater, a CWF600 soot particle filter and a rear view camera with monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. Hodsr Uzazspfx Aflefk The excavator is also equipped with a wagon braking system that can be controlled from the cabin, as well as an electronic stroke limiter for fine-tuning the lifting and working cylinders. The machine has various loading options and is offered with a comprehensive maintenance record (service booklet). Inspections are possible during the stated opening hours without prior appointment. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: good (used), Code: 0404 Brand: HAMMER - FELDER GROUP Model: A3 - 31 - CE Standard 2-works combined machine (Surface Planer/Thickness planer ) for joinery, furniture, joinery fittings, custom-made furniture, plastic and various – CE Standard Hjdpfjzcqmfjx Aflefk Technical specifications: Planer width 310 mm Table length 1400 mm Tilting guide 90-45° Three-phase motor v. 380 4 Hp Planer shaft with 3 knives Max chip removal 4 mm Thickness table width 306 mm Thickness table length 540 mm Min workpiece length 145 mm Thickness feed speed 6 mt/min Suction inlet diameter 120 mm Overall dimensions mm 1450 x 600 x 1000 h Weight kg 290

Condition: new, functionality: unexamined, machine/vehicle number: 0035719, Professional combination soft serve ice cream machine, Frigomat Twin 35, new and in original packaging. This machine combines a pasteurizer and a freezing cylinder and is suitable for ice cream parlors, the food service industry, and food production. Features and equipment: - Combination of pasteurizer and batch freezer - Automatic and semi-automatic programs - Suitable for granita, soft serve ice cream, and desserts - Electronic consistency control IES - Stainless steel container and robust agitator Technical data: - Production capacity: approx. 35 kg/h - Batch size: 2–6 kg - Power: 9 kW - Connection: 400 V, 3-phase - Weight: approx. 323 kg - Dimensions: approx. 550 x 960 x 1,380 mm - Pasteurization up to 105 °C Hedpszrn Azjfx Aflefk Documentation as well as warranty and CE certificates are available. Location: 65618 Selters (Taunus), Germany.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, For sale is a Hammer circular saw-milling machine B3 Winner with a cutting length of 1250 mm. The machine is used as an exhibit in our showroom and is therefore in new condition. Technical data: - Cutting length 1250mm - Cutting width 800mm - Cutting height 103mm - 4 milling speeds - Height adjustable + swivelable - Dust extraction port Ø 120mm - 2 motors à 3 kW - Year of manufacture 2026 Hfedszruvbjpfx Afljk The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: circular saw, milling machine, combined machine Reference: R-A0117

Condition: good (used), Year of construction: 1985, Used machine Hjdpfjzpa Ukex Aflofk Equipment and technical data: - 4-knife planing cutter block - Surfacing: - Working width: 500 mm - Total table length: 2200 mm - Motor: 4 kW - Thicknessing: - Minimum working height: 3 mm - Maximum working height: 230 mm - Maximum chip removal: 8 mm Availability: immediate Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2014, operating hours: 4,925 h, fuel type: diesel, GENIE S-45 Telescopic boom lift, 4x4, DEUTZ DIESEL, 4925 hours, 15.7m working height, 2014. A video can be sent via WhatsApp. Hsdpfx Aozt Rxusflsfk We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Please call beforehand to make an appointment, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1994, Working width 500 mm Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Number of knives 4 St. Feed speed 7/14 m/min. Hsdpfx Aozfqknefljfk machine weight ab. 1050 kg

Condition: used, functionality: fully functional, machine/vehicle number: 3518100194, Year of construction: 1999, load capacity: 3,000 kg, fuel type: diesel, mast type: duplex, drive type: Diesel, Diesel forklift Chassis number: 3518100194 Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Front tire condition: 40 - 60% Hfodpfx Aozttlqjflok Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Linde H30D / Deutz engine, no.: R0803, year of manufacture: 1999, operating hours: not specified, lifting capacity: 3,000 kg, lifting height: not specified, overall height: 2300 mm, mast: standard, drive: diesel, engine: Deutz diesel engine, equipment: side shift, 3rd hydraulic valve, front and rear work lights, windscreen, full cabin and windscreen wiper. Condition / known defects: The Deutz engine starts. The machine drives, but sometimes shuts off again after travelling only a few metres. The tilt cylinder is defective. Poor visual condition. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. 3rd hydraulic valve, rear work light, front work light, windscreen, full cabin, windscreen wiper.

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Hjdeztducjpfx Aflsfk

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine Hsdoy D T S Ujpfx Aflofk - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop Tools: 2x 10-function multitool 1x 5-function multitool 1x 5-function EeasyType multitool 5x thread forming tools 1x Multishear 1x calibration tool 1x ball deburrer 2x gills M3–M8 threading dies Centering studs (top and bottom) Countersinking tools for 1.5 and 2 mm Various countersink and form countersink tools

Condition: like new (used), functionality: fully functional, For sale is a Felder CF7-41 S Professional 4-in-1 combination machine. The machine is currently used in our showroom and is therefore in like-new condition with full warranty. Technical data: - Jointer/planer width 410 mm - 4-knife cutterblock (reversible knife system) - Swiveling planer fence 90-45° - Dual folding jointer tables - Electric planer table adjustment with LED display - 2 feed speeds 6 + 12 m/min - Circular saw and router swiveling 90-45° - Sliding table 2500 mm - Extension table with miter gauge 2600 mm - Graduated scale index for miter gauge - Router fence 230 mm with multi-adjustment system - 4 router speeds 3500/6000/8000/10000 rpm - 3-motor, 7.5 HP (5.5 kW), 400 Volt - Automatic star-delta starter Hfsdpfx Aszqtflefljk The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, see the telephone number on our website. Related terms: Combination machine, 4-in-1 combination machine, 5-in-1 combination machine, circular saw, planer, router Reference: R-D1618

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AWPC 6005, total width: 5,000 mm, total length: 8,000 mm, total height: 2,000 mm, Automatic Wooden Pallet Collars The machine equipment is specified below in sequence: Hfjdjzi Tvbspfx Aflsk 1-Automatic Wood Feeding Unit 2-Automatic Drilling and Nailing Unit (including Automatic Nail Feeder) 3-Automatic 180-Degree Turning Unit 4-Automatic Hinge Pickup and Positioning Unit 5-Automatic Crimping Unit 6-Automatic Marking Unit 7-Automatic Stacking Unit 8-Automatic Width Adjustment System All mechanical components, pneumatic equipment, and electrical components included in the machine are covered within the quoted price. The pneumatic components are configured with Festo products, and the automation system is configured with Mitsubishi components. The product specifications for operation on the machine are as follows: Board Length: 700 mm – 1600 mm Board Width: 180 mm – 230 mm Board Thickness: 15 mm – 25 mm Line Capacity: 300 products/hour (capacity may be increased depending on the product dimensions being processed) Installed Power: 40 A, 380 VAC, 50 Hz Air Consumption: 1,500 liters/minute Machine Weight: 9,500 kg The entire machine has been designed by EFO Makina. Dimensional revisions and changes to material brands can be implemented in accordance with the customer's requirements. All CE certification documents, spare parts lists, and operation manuals related to the machine will be supplied together with the machine upon delivery.

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 10 min. module 0,5 Control Siemens Sinumerik 840D weight of the machine ca. 9,5 t Hfjdpeyan Nfjfx Afljk dimensions of the machine ca. 3800x2600x2550 mm Maximum wheel diameter: 275 mm Module +: 10Module -: 0.5 CNC control Max. spindle speeds: 1200 rpm Max. wheel width: 58 mm

Condition: good (used), Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Hsdpfx Aezbu Azeflefk Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dimensions mm 200 x 400 Spindle 0–16 mm Longitudinal stroke 150 mm Transverse stroke 90 mm Vertical adjustment by handwheel Overall dimensions of assembled machine mm 2000 x 1400 x 860 h Weight kg 450

Condition: used, Combined blower oven with two floors and a fermentation chamber Dimensions: 90x150x210cm Hjdpfx Ajutau Seflsfk Electric power: 15kW Capacity: 4 trays x 60x40cm

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. Hfjdpfxoxc E Trj Aflsk A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: used, Flat Pile Feeder Folding Machine Stahl KC 56/6-KTL for 16 pages Cross Fold and 6 buckles 2 knives with Side buckle Falzmaschine / Combination Folding Machine Stahl KC 56/6-KTL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1990 - Serial-No. 41655/90-169032 Arbeitsbreite max. 780mm / Working width max. 780mm Flachstapelanleger / Flat Pile Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter mit Seitentasche / 2. Folding Unit 2 knives with Side Buckle Leimeinrichtung Planatol / Gluing unit Planatol Hfedeyw Hg Sjpfx Aflsk Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Combination Folding machine MBO K800.2 SKTL/4 AUT Navigator Hodjydmfyjpfx Aflefk Falzmaschine / Combination Folding machine MBO K800.2-S-KTL-4 Navigator Baujahr / Year 2007 - Serial-No. 0124999 Rundstapelanleger / Round Pile Feeder Falztyp  4 Taschen - 2 Schwerter - 1 Seitentasche Folding Type 4 Buckles - 2 knives - 1 Side Buckle Schuppenauslahge mit Presswalzen / Stream delivery with integrated pressing MBO ASP 66 - 2 ME  Inklusive Kompressor / Include Compressor Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), AGT Combination table saw and miter saw - Cutting width: 380mm - Cutting height: 85/40mm Hfsdoy Tmgkopfx Aflsk - Weight: approx. 50kg - Tilting and swiveling