Used Wenzel Lh for sale (54)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring range X-axis: 1,000 mm Y-axis: 2,000 mm Z-axis: 800 mm Granite guideways Air-bearing axes Measuring accuracy Length measurement deviation: approx. 1.3 µm plus L/400 depending on the design and calibration status Probing systems Renishaw probing heads are possible Touch trigger and scanning PH10, TP20, SP25, SP80, depending on the configuration Workpiece weight Fsdpjy Ewgxsfx Afpopi Permissible table load up to approx. 2,000 kg depending on the design Control CNC control with hand-held operator unit Software Metrosoft CM Version 3.112 WENZEL Quartis R16 Electrical supply 230 V, 50/60 Hz Power consumption: approx. 1 kVA Pneumatic supply Compressed air, 6 to 10 bar filtered and dry

Condition: used, Year of construction: 2000, table length 1160 mm Fsdet Hw S Iepfx Afpopi table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 Fpsdpfxst Hw Nys Afpoi total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 199102, WENZEL LH 108 CNC Coordinate Measuring Machine Manufacturer: WENZEL Type: LH 108 Design: CNC 3D coordinate measuring machine (bridge design) For sale is a precise and powerful WENZEL LH 108 coordinate measuring machine. This machine is ideally suited for quality assurance, production metrology, and demanding measuring tasks in tool and mold making. The LH 108 impresses with its stable granite construction, air-bearing axes, and high measuring accuracy. Thanks to CNC control, both single and series measurements can be carried out efficiently. Technical Data Measuring range: approx. X 1000 / Y 1600 / Z 800 mm Max. workpiece weight: up to approx. 2000 kg High measuring accuracy in the µm range Equipment Air bearings in all axes Granite guides for maximum stability Modern CNC control with joystick operation Various probe systems (depending on the model) Temperature compensation (model-dependent) Application areas Quality assurance and incoming goods inspection Series and single-part measurement Freeform surfaces and complex components Reverse engineering Fjdsy Tnyfjpfx Afpopi Other Machine in used condition. Inspection possible by arrangement.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, number of axes: 3, This 3-axis Wenzel LH 87 CMM machine was manufactured in 2014. It features a measuring range of 800 mm in X, 1000 mm in Y, and 700 mm in Z, with a maximum component weight capacity of 800 kg. The machine is equipped with an air-bearing system across all axes and a Renishaw PH10M Plus motorized indexing probe head. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 87 CMM machine we have for sale. Contact us for further details. Fpedpfx Afoy Uvtvjpoi - Volumetric Length Measuring Error (E0, MPE): 2.2 µm + (L / 300.0 mm) µm- Length Measuring Error along Optical Axis (E150, MPE): 2.2 µm + (L / 300.0 mm) µm- Max. Component / Workpiece Weight: 800 kg- Axis Bearings: Air-bearing system integrated across all axes- CNC Control Unit: WPC 3-axis contouring configuration- Controller Hardware: WPC2040 Basic combined with Renishaw PHC10-3 PLUS controller rack unit- Machine Control Panel: Wenzel HT400 wired manual joystick control handbox- Probe Head System: Renishaw PH10M Plus motorized indexing probe head- Probing Sensor System: Renishaw TP200 high-precision strain-gauge touch-trigger probe- Change Rack System: Renishaw SCR200 6-port autonomous stylus changer bridge (5 ports actively equipped in visual configuration)- Active Stylus Configurations (on-rack):* Port 1: Taster 1001 (Ø 1.00 mm)* Port 2: Taster 2001 (Ø 2.0 mm Cylindrical)* Port 3: Taster 3001 (Ø 2.00 mm Ruby Ball)* Port 4: Taster 4001* Port 5: Port 5 configured (Visual confirmation: angled/star setup)- Evaluation PC Hardware: Fujitsu Esprimo Desktop PC Tower housed in a dedicated lower-desk controller bay compartment- Visual Workstation Monitors: 2 x BenQ 24" TFT flat screen displays- Input Peripherals: Wired keyboard, mouse, and Wenzel-branded workflow mousepad- Core Operating System: Windows 10 Pro (Version 10.0, Build 19045, 64-bit Edition)- Metrology Software Suites:* Wenzel WM | Quartis Standard (Build R2025-1 / R2025-2 back-compatible ecosystem)* CM Wenzel CNC Control Geometry Software Module* CM Wenzel CNC Free-Form Surface Software Module- Software Licensing & Security: Metrokey Dongle Protection (ID: 45984, Status: Valid, Local Workstation), Driver Version 7.6.0- Native CAD Data Core Interfaces: STEP, NX, VDA-FS, IGES, EMD (Q-DAS), IMPEX-ELEM, CURVE, SURF, IPH, PRC- Optional Extension Interfaces: CATIA, Pro-E, SolidWorks- Included Calibration Accessories: High-purity Ceramic Reference Calibration Sphere complete with base extension column block

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis Wenzel LH 54 CMM machine was manufactured in 2003. It features a measuring range of 500 mm in the X-axis, 1000 mm in the Y-axis, and 400 mm in the Z-axis. The machine includes a granite structure base, air bearing guideways, and a portal design, making it suitable for quality assurance and series production applications. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 54 CMM machine we have for sale. Contact us for further details. • Condition: completely checked and retrofitted; new software • Machine design: granite structure base; air bearing guideways; portal design • Applications: quality assurance; series production Fjdpeyxqfusfx Afpopi • Availability: currently powered and available for demonstration • Calibration/verification: factory calibration certificate available; determination of length measurement uncertainty, probing uncertainty, and repeatability range • Measuring range: maximum space diagonal 4660 mm • Measurement uncertainty: E0 = 2.5 + L/300 µm • Controls and software: controller WPC2040 Basic; installed software WM Quartis R2026-1 • Probe system: TP20; probe head PH10T; probe head interface PHC10-3 PLUS; probe interface PI200 Combi; joystick HT400 • Options and services: measurement program creation for customer parts available; optional upgrade with Renishaw SP25M probe system (additional hardware and service included with upgrade); additional software modules on request; custom accessories and fixturing systems available Additional equipment • PC system with Windows 11 (compliant with current Wenzel requirements) and WM Quartis R2026-1 installed • 2 × 24" TFT monitors (new) • Mouse and keyboard • Probe change rack MCR20 (unpopulated/empty) • 1 × TP20 Standard Force Module • Stylus kit M2

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 971696, Technical Data Manufacturer: Wenzel Type: LH87 / CNC Year of Manufacture: 1997 Machine No.: 971696 Measuring Range Fpedpfx Afjd Sv D Nepei X-axis: 800mm Y-axis: 1000mm Z-axis: 700mm Probing System Probing Head: PH10M Probing System Type: TP20 Control Panel: HT400 Control System: WPC 2010 The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We would be happy to prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Year of construction: 1995, condition: excellent (used), machine/vehicle number: LH951333, Technical Specifications Fpjdjd Hqyzepfx Afpji Manufacturer: Wenzel Type: LH86 / CNC Year of Manufacture: 1995 Machine No.: LH951333 Measuring Range X-axis: 800 mm Y-axis: 1000 mm Z-axis: 600 mm Probing System Probe Head: PH10M Probing System Type: TP20 Probing System No.: 438P68 Control Panel: HT400RC V2, Wireless Probe Head Controller: PHC 10 Control System: WPC 2040 Calibration Sphere: DIA 29.369 (Ideal for star probes) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Fpodpfx Afoipq I Ispei Pneumatic system completely overhauled;

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Fsdow H Auqspfx Afpspi

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Fsdpfxsw H Auwe Afpepi

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Fpsdpfx Asw H Au Rjfpji

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Fedpfxju Ur Sqj Afpepi

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Fpjdpfx Afou T Rhzopsi

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Fpedpfx Asw H Au Dofpji

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054344, Equipment: type plate available, Wenzel LH 65 Machine data: MBX 650-MBY 1000-MBZ 500 Serial number 054344 Year of manufacture: 2005 Controller: WPC 2030 Probe system: Renishaw Exchange bridge: Renishaw Software: Metrosoft CM 3.111 Software: Quartis R10 Probe head: PH 10M PHC: PHC 10 Probe: 2x SM25-1 Probe: 1x SM25-2 Probe: 1x TM25 (adapter) Fjdpfxjxr Av Nj Afpepi DAkkS calibration certificate dated 05.09.2025 The coordinate measuring machine is fully functional and in excellent condition.

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty Fedpfxey Dcivo Afpjpi - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: used, Year of construction: 2007, machine/vehicle number: 75388, Machine: Wenzel LH87 Serial number: 075388 Year of manufacture: 2007 Fedpfjx Ey Daox Afpjpi X 800mm Y 1000mm Z 700mm Measuring head: SP80

Condition: used, Year of construction: 2008, #: software: WM I QUARTIS (current version) Measuring range: 800x2,000x700 [mm] Measurement uncertainty: Eo = 2.3 + L/300 [μm] Fjdpfx Afeh Nct Ajpopi Max. component weight: 800 [kg] CAD interfaces: VDA, IGES, STEP Optional: CATIA, Pro-E, SolidWorks Further information: • Air bearings in all axes • CNC control for 3 axes WPC • Control geometry and free-form surface (current version) • PC system (NEW) • 2 x 24“ monitor (NEW) • Touch probe PH10M/TP200 • Reference sphere • Controller table Options: Additional software modules, probe changers, accessories and clamping systems available on request. Services: Installation • Commissioning and accuracy inspection • DAkkS calibration certificate as desired • Individual training • Packaging/transport/insurance

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 Fpjdpezkvvyjfx Afpji helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Fodpfezkug Rsx Afpspi Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: ready for operation (used), Plate size: 600 x 1000 mm Plate thickness: 120 mm Fsdpezh H Tqsfx Afpjpi Space required on base cabinet: 600 x 1000 x 930 mm Weight

Condition: used, Year of construction: 2020, x-travel 800 mm y-travel 700 mm z-travel 700 mm Control Wenzel max. workpiece weight 0 kg accuracy Renishaw SP 25 M Measurement inaccuray 2,6 µm repeatability 1,6 µm Longitudinal uncertainness MPE: 3,5 + L/0 µm (standard) Longitudinal uncertainness MPE: 3,5 + L/0 µm (extended) Fedpfxezgibzs Afpopi

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 150 mm height over floor: 890 mm weight of the machine approx.: 250 kg Fpedezb Ux Aepfx Afpoi space requirements of the machine approx.: 2,5 m x 2,2 m m

Condition: used, functionality: fully functional, total width: 1,500 mm, total length: 4,000 mm, overall weight: 10,000 kg, plate height: 455 mm, Granite Plate (Wenzel) Fpedpfozfxrtex Afpsi - Dimensions 4000 x 1500 x 455mm - Quality Class 0 (will be checked) - inkl. T-Slot and tailstocks - with steel feet - working level 750 - 850mm - without parts on the table