Used Drechselmeister Twister Eco+ for sale (5,667)

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 Iijdpfx Asd Iip Ten Dsa total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

Condition: new, cutting diameter 220 mm saw band length 2455 mm Ijdpod Iip Uefx An Doia table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Iiedpfx Aeyzy S Ajn Doa Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Weight 1500 kg Iisdpfx Aov A Hadjn Dja Total power requirement 14 kw

Condition: used, Year of construction: 2017, input voltage: 400 V, compressed air connection: 7 bar, type of input current: three-phase, power: 94 kW (127.80 HP), We are offering this used ROQ ROQPRINT ECO P14 XL screen printing machine, year of manufacture 2017. Includes a ROQ screen printing dryer from 2014. Both units are in good working condition with no known issues. The package includes numerous accessories such as various pallets, screen printing frames specifically designed for the Roq click system, squeegees, and extra squeegee rubbers. Optionally available: a table for fitting the click system onto the frames, a film printer, and a machine for sharpening squeegees. In short, everything you need to start immediately or take a significant step towards more professional production. Model: ROQPRINT ECO P14 XL Serial number: RPE-1601 Year: 2017 Iiedpfxjyzr Sue An Dja Active power: 94 kW Voltage: 3×400 VAC Power: 94 kW Air pressure: 0.7 MPa (100 Psi) You are always welcome to visit and inspect the equipment. Some accessories are also sold separately. If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, Trimming, gluing, end trimming, edge trimming, corner rounding, scraper-edge, and polishing. Our ECO F7 stands out from other compact edge banders because all the functional modules of the Eco F series are derived from, and suitably adapted from, industrial edge banders. While maintaining the same high precision and stability as industrial edge banders, the maximum durability and operational efficiency of the equipment are preserved. The Eco F series saves space and provides excellent edge banding results. It is ideal for small furniture factories, decoration workshops, and woodworking shops; it also serves as an excellent solution for small batch production in large-scale furniture manufacturing facilities. Most components are sourced from high-quality, well-known brands, such as: SIEMENS, AUTONICS, HONEYWELL, OMRON, and DELTA. Includes: – Infrared heating lamp – Glue scraper – Meter counter – Cleaning liquid – Release agent MOTORIZED HEIGHT ADJUSTMENT Complies with the latest CE regulations. Iiedpfeuzxk Ajx An Dja

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D Iijdjyry S Aopfx An Doa WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm Iisdpfoyry S Nsx An Dja MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1327507695580, power: 575 kW (781.78 HP), total width: 750 mm, total length: 2,200 mm, total height: 750 mm, nominal heat output: 530 kW (720.60 HP), heating capacity: 574 kW (780.42 HP), fuel: domestic gas H, input frequency: 50 Hz, operating pressure: 7 bar, Equipment: type plate available, Remeha boiler installation, Freestanding, high-efficiency gas boiler. Very tidy machine, Currently still available for on-site inspection. Will be dismantled and prepared for transport by the seller. Collection by appointment. A total of 2 units available, price listed is per boiler. Iedpoyzq Dcjfx An Dsia

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump Iiodpfopz H Hqsx An Dea max. flow: 6l/min max. pressure: 21MPa pressure ratio: 30:1

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Isdpfx Anjv A Hgks Deia Total power requirement 2,2 kw

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine designation: Bandsaw Manufacturer: MEBA Model: 407A-OV Year of manufacture: 2005 Condition: very good (used) Functionality: fully functional Technical details Power: 5.5 kW (7.48 HP) Input voltage: 230 V Maximum cutting width: 407 mm Overall height: 2,000 mm Overall length: 1,400 mm Overall width: 2,500 mm Unladen weight: 3,500 kg Cutting range for round steel at 90°: 407 mm Cutting speed: 300 mm/min Saw band length: 5,120 mm Saw blade length: 5,120 mm Iodeyxyv Aepfx An Dsia Description MEBA 407A-OV CNC Horizontal Bandsaw Material feed conveyors Year of manufacture: 2005 Siemens control system Chip conveyor 5.5 kW 3.5 t L 1.4 x W 2.5 x H 2 m Saw band length: 5,120 mm Cutting speed: 15 - 150 m/min Clamping height: 10 - 407 mm Clamping width: 10 - 407 mm Cutting area: 407 x 407 mm Cutting range (round): 407 mm Infinitely adjustable lowering speed: 0 - 300 mm/min MEBA Maschinenbau GmbH Standard commission System designation: ECO 407A-OV Year of manufacture: 12/2005 Type: ECO 407A-OV MEBA Operating instructions MEBAMAT 407 A-OV Chapter 1 - Technical Data Machine type: MEBAMAT 407 AOV Machine number: 7099 Cutting range: 90° Round: 407 mm Flat: 407 x 407 mm Bundle clamping range: 10 - 407 mm Width: 10 - 407 mm Height: 0 - 600 mm Material feed: 0 - 9999 mm Single: Multiple: Remnant length: Manual: approx. 25 mm Automatic: approx. 70 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: stepless hydraulic Lowering speed: 0 to 300 mm/min - stepless Saw band dimensions: 5120 x 41 x 1.3 mm Operating instructions MEBAMAT 407 A-OV Saw band tension: hydraulic Approx. 3050 kg (net) Machine dimensions (L x W x H): Approx. 1500 x 2600 x 2100 mm Max. support weight: Material weight max. 600 kg/m Working height: 750 mm With installation elements approx. 800 mm (option)

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW Ijdpfx Aoyttyvon Doia EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Year of construction: 2024, condition: used, Manufacture : Volkmann Model : VS250 Eco Year : 2024 Condition: new, never used Classification: ATEX Ex (see photo) Type: MULTIJECTOR® Vacuum Transfer System / conveyor Iodpoyvk Tajfx An Deia VS250 G900 Pump and Cover Assembly Maximum air intake flow rate: 4,063 NI/min Electrotimer ET4S (Electropneumatic control unit) Cleaning filters with compressed air Materials: stainless steel

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics Iiedoyyc Spepfx An Doa A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Isdowhuufjpfx An Djia Filter cleaning: manual Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: new, Year of construction: 2023, Capacity: 15 - 70 kg/h Briquette diameter: 60 mm Ijdsk Utq Djpfx An Doia Automatic run: Yes Oil preheating system: Yes Material humidity: max 15% Tank size: octagonal, diameter 750mm Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H) Motor power: 5,5 kW Control cabinet: electronically controlled via SPS Weight: 450 kg

Condition: used, axle configuration: > 3 axles, first registration: 01/2016, loading space length: 9,200 mm, loading space width: 2,550 mm, loading space height: 900 mm, total length: 13,570 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 7,370 mm, color: yellow, Year of construction: 2016, Equipment: ABS, = Additional Options and Accessories = Iodpfx Anjyy H Sto Deia - Lift axle - Toolbox = Notes = Broshuis 4ASD-18-40/1 2 x self-tracking axles. 2 x lift axles. Eco ramp operates on 24V. Loading bed: 920 + 317 cm extendable. Loading height: 90 cm (87 cm when loaded) Total length: 1350 cm. = Further Information = Axle configuration Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle 2: Twin tyres; Tyre tread left inside: 30%; Tyre tread left outside: 50%; Tyre tread right inside: 30%; Tyre tread right outside: 50% Rear axle 3: Twin tyres; Steered; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Rear axle 4: Twin tyres; Steered; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Weights Unladen weight: 11,600 kg Payload: 54,400 kg Gross vehicle weight (GVW): 66,000 kg Identification Type number: 4AOU-16-40 / 4 AXLE / ECO RAMP / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide correct information, but no rights can be derived from the published texts.

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Iiedpjyrir Eofx An Dsa Through-spindle cooling: 12 bar Chip conveyor

Condition: excellent (used), Year of construction: 2016, operating hours: 45,000 h, functionality: fully functional, clamping force: 600 kN, clearance between the columns: 310 mm, ejector stroke: 110 mm, opening stroke: 270 mm, total length: 3,980 mm, total width: 1,170 mm, total height: 1,870 mm, heating capacity: 6.25 kW (8.50 HP), Haitian MA600 II/130 eco Year of manufacture: 2016 Clamping force: 60 t Immediately ready for operation. Iiedoyyd Sdopfx An Dea Machines are available! Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2008, DMG - CTX 510 ECO - 2008 DMG ECOLINE - system FANUC - with driven tools - X axis 300 mm - Z axis 1050 mm - max machining diameter 465 mm - max turning diameter 680 mm - spindle diameter 140 mm - max spindle RPM 3250 Iiodjyuldcepfx An Doa - 12 position turret head - with appr. tool holders 17+ - chip conveyor - 15500+ working hours - weight 7800 kg

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation Iiedpfsyn I U Rsx An Dea • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. Ijdpfx Ansx D D Hte Dsia • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Notes/condition: Screen may be defective • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment • 3D probe • Chip conveyor & coolant & miscellaneous: No chip conveyor & no internal cooling, only normal external coolant supply Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 35 mm, track width: 2,000 mm, table length: 6,000 mm, cutting current: 260 A, We offer for sale a used, reliable, fully functional Messer Multitherm eco 3100 plasma cutting machine, year of manufacture: 2013. Iisdsyvgdyjpfx An Doa Manufacturer: Messer Model: Messer Multitherm eco 3100 Year of manufacture: 2013 Condition: ready for use Machine type: plasma cutting machine Available for pickup: 08/2026 Description: Power source: 260 A Table size: 2 x 12 m Cutting up to 35 mm sheet thickness Software: Omniwin 2025 Regularly serviced Pre-prepared for oxy-fuel cutting Test run possible upon agreement If you have any questions or need more information, feel free to write us a message or call us.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3460x1000x2400 mm Number of filters 73 St. Number of dust containers 4 St. Iedpfew Nblrjx An Deia Weight 410 kg 355 mm 520 mm