Used Durendus Single Column Press - Hydraulic for sale (35,085)

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm Dsdovc Awxjpfx Aptocl throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Dcjdjyath Topfx Aptol Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t Dcedpsd R Szusfx Aptjl dimensions of the machine ca. m

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Djdpfoyiflmsx Aptscl

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Dsdpfxjxz Hfme Aptjcl Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg Dcsdoyz Dr Topfx Aptjl In good condition

Condition: used, Year of construction: 1994, pressure:100 t throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm Dcodpet Hmk Hjfx Aptel length in width:1200 mm voltage:380 V weight of the machine ca.:4 t

Condition: used, Year of construction: 1971, pressure 100 t Dcedpfxeyuttrs Aptjl passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm Djdstxdmwjpfx Aptecl C-Type 1 Station *

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: Dodpfx Apektg Dhstecl - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Djdpfx Apovyirkstocl

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm weight of the machine ca. 4 t Dcodsw Syd Espfx Aptjl

Condition: new, functionality: fully functional, pressing force: 28 t, stroke length: 150 mm, table width: 300 mm, table length: 325 mm, throat depth: 225 mm, TECHNICAL DETAILS Pressing force: 28.0 t Throat depth: 225 mm Stroke: 150 mm Dsdpfx Ajyg Dr Asptecl Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Integrated pressure gauge Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar Djdpfx Apsu Nfmaotjcl air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: new, neu ca. 4 Monate ab Auftragse Italien 46400 € 886.24 € 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots Dcodpfx Ajwiry Isptsl 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Dedpfx Aslyr Adjptecl

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm Dcedpfx Apsu Nfudjtsl table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) Dcjdev Uraaepfx Aptjl - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t Dcedjxna Uzopfx Aptol dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Dcjdpfotx E Rqsx Aptol Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Dodpfx Aehma Smsptecl Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm Djdpfx Aszkl Husptecl work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Dcodpfx Apei Db Ibstel Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Year of construction: 1977, pressure 160 t Dcjdpfxszwg Ums Aptel throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW Dodeul Eawepfx Aptjcl weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m