Coining Press - Single Column - Hydr.

BORRIES BM 76 EL

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Fgodpev Scrhsfx Am Tjd

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty. Fodpfx Asytr Rmem Tegd

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Fsdox Ii Hvjpfx Am Tjgd Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Model: C3T Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. Fgodpfsg D Nz Rox Am Ted 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Fodpfsyl Idaox Am Tsgd Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V Fsdpfeupxdqjx Am Tjgd weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness Fedpfxsy D Npij Am Tjgd • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Fedpfx Ajk Ea Uuem Tsgd

Condition: new, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 tons Piston stroke: 185 mm Table width: 170 mm Throat (E): 510 mm Throat (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Cylinder adjustable (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Features • Standard equipped with a pressing cylinder that can be moved to the left and right • For aligning, pressing, bending, and assembling gears, discs, etc. • Standard equipped with a foot pedal and hydraulic • hand pump for piston advance • Standard equipped with a support prism for aligning shafts • Standard equipped with automatic piston retraction via an integrated return spring • Height-adjustable press table with locking pin • Large-sized pressure gauge for reading the pressing force • Includes a two-stage hydraulic pump Fgsdpfxod Du T Re Am Ted • Robust construction due to welded steel frame

Condition: new, Screen drums for almost all drum screen machines, manufactured with the highest precision! Made in Germany – from layout to production, everything from a single source! Almost any hole pattern can be realised! Manufactured from wear-resistant steel! Short delivery times! Unbeatable prices! Fgedpfow Izl Aox Am Tjd