Used Ecoline Qsand 6 for sale (49,872)

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle HSS Touch probe Kedpfeyb S U Ujx Afuelu Tool setter Through spindle coolant chip auger

Condition: used, Year of construction: 1989, Model - 600/6 Ksdpfeyubh Rjx Afuslu Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Year of construction: 1987, condition: good (used), Manufacturer - Cams Shefield Year - 1987 Speed - up to 80 m/min. Width of sheet - 1250 mm Thicknes - up to 6 mm Kjdpfx Afsgk Nu Hsuelu Coiler capacity - 12 tons

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,850 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kedpezfpwgjfx Afuelu

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Overall loading area length approx.: 8,200 mm; recessed bed approx.: 6,000 mm long; loaded floor height approx. 890 mm; 22 lash rings each rated at 10 t; 10 stake pockets in the outer frame; loading ramps (approx. 3,100 x 750 mm); climbing strip on ramp outer side and rear slope; ramps laterally adjustable; 68 mm thick wooden floor; lockable storage box for lashing chains or straps; contour marking according to regulations; vehicle fully hot-dip galvanized; includes axle load indicators; Additional options: Warning signs with lighting and beacon, price: €500; extension to 3 m with wooden planks, price: €500; hydraulically adjustable ramps, price: €1,000; excavator arm recess, price: €1,000 net. -- Subject to errors, omissions and change, sample images --, More details available at: ! Kedpfx Afezfgvtouolu

Condition: good (used), Year of construction: 2009, operating hours: 35,961 h, functionality: fully functional, load capacity: 6 kg, arm reach: 810 mm, IRB 140 is designed specifically for manufacturing industries that use flexible robot-based automation. The robot has an open structure that is specially adapted for flexible use, and can communicate extensively with external systems. Used IRB140-6/0.8 Year: 2009 Klodoqzww Nspfx Afuju Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included, can be provided up on request. Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman. (Source ABB's Website)

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN CM 6 Traveling Column Milling Machine – available for short-term delivery The LAGUN CM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for the operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of milling machines. The machines impress with their reliability, ease of maintenance, and economical operation. Technical equipment: Control: Two HEIDENHAIN TNC 7 digital path controls – one on the front of the machine and one at the rear in the cabin 2 x HEIDENHAIN TFT screens 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: Automatic tool changer (ATC), 60-position Chip disposal: Hinged belt conveyor Preparation: Preparation for rotary table / 4th axis Ksdpfxsvrv Suo Afujlu Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast availability of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 9,763 h, load capacity: 8,000 kg, lifting height: 6,000 mm, fuel type: gas, mast type: simplex, construction height: 4,185 mm, empty load weight: 11,700 kg, total length: 3,850 mm, drive type: Treibgas, construction width: 1,600 mm, LPG Forklift Load Centre: 600 mm Mast Type: Standard Klsdpfx Asy A T Hvofuou Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 355/65-15 Rear Tyres Type: Superelastic Rear Tyres Size: 8.25-15 Description: In addition to this Kalmar model, we also have around 200 heavy duty forklifts, compact forklifts, counterbalance forklifts & sideloaders available at our warehouses in Hamburg and Gdańsk. Visit our website - sago-online. Leasing and financing on attractive terms are always possible for us. We are also happy to purchase your used machine outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this GCE80-6. P.S.: Our master workshop for forklifts specialises in repairs, servicing, overhauls and custom modifications for forklifts from 8 t. We can also offer to display your vehicle for commission-based sale at our premises. Heater, Full Cabin,

Condition: good (used), motorized limit stop behind foot switch Kedpfx Afjhtq N Njuelu Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot Kledpfeya Iaqsx Afusu - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, mileage: 5,68,330 km, power: 375 kW (509.86 HP), first registration: 05/2023, fuel type: diesel, empty load weight: 8,451 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 315/70 R22.5, rear tire size: 315/70 R22.5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, spoiler, truck registration, | Volvo FH 500 | VIN: YV2RT40A8PA328890 | XXL cab - Globetrotter | Lane keeping assist, cruise control, sunroof, collision warning system | EURO 6, I-Shift, EBS | Refrigerator, auxiliary air conditioning | Hands-free system, multifunction steering wheel | Auxiliary heater, seat heating | Electric windows, electrically adjustable and heated mirrors | Radio | Subject to errors, typos and prior sale. Ksdpozc Nzbsfx Afuelu

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kledsxzuyrepfx Afusu Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Cutting height: Max. 100 mm (at 315 mm saw blade diameter) Saw blade swing: 0 to 45° (manual) Kledpfxjzflv Ss Afueu Motor power: 4 kW (approx. 5.5 hp) Trimming table (sled): 1600 mm standard Cutting width: default 1000 mm on the parallel stop

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Kljdporqzzpofx Afuju Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder

Condition: used, Year of construction: 2005, In the configuration 1.2-2.1 axes are X-fix Z-NC and all other axes are NC controlled Double NCU It has Büschel, Çiller and Knoll units. High pressures 40 Bar SIR25 IEMCA driver available It is in working condition, our workbench can be seen in our Bursa Gemlik factory. Kjdpfxold Npyj Afuolu

Condition: good (used), Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - Norme CE Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Kledpfx Afjy I Tqrsusu Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400

Condition: used, functionality: fully functional, WEINIG Profimat 14/6 Four-Sided Planer Specifications: • Condition - used, after technical inspection, has defects • Manufacturer - WEINIG • Model - Profimat 14/6 • Working width 140 mm • Working height 120 mm • The machine has 6 spindles with a diameter of 35 mm • Spindle motors - 5 x 3.0 kW (separate for each head) and 1 x 7.5 kW (burnt out) • Total power 24 kW • Electric adjustment of planing height from the control panel and at the end of the machine, at the 6th head • Manual adjustment of planing width • Possibility of adjusting the vertical spindles up/down (as in an up-cutting router) • Infeed gear before the first head • Pressure from spring-loaded feed rollers • Infeed table with a length of 200 cm and a width of 20 cm • Smooth speed adjustment on a variator • Several profile cutters and wrenches included • Overall dimensions 440 x 140 x 155 cm (L x W x H) Additional information: • The machine has one burnt-out motor (the price takes this defect into account), but the remaining spindles and functions of the machine can be checked on-site • The machine shows signs of wear, but its solid construction ensures it will last for many years • The photos show the actual condition of the item for sale • Possibility to switch on and test the machine on-site • Free training on how to operate the machine (at the company's headquarters) • The price stated in the auction does not include VAT and transport costs Financing and transport: Kedjzd Tmvepfx Afujlu • We organize transport with the MDD fleet, courier companies or external carriers • We can provide financial support in the form of leasing or a leasing loan

Condition: used, offer consists of: Ksdpfju S Af Nex Afuslu 1x Hohner 43/6 S ring eyelet stitching head suitable for any kind of booklet maker / saddle stitcher We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1995, rotary table diameter 600 mm boring diameter 600 mm grinding height 450 mm control Siemens Sinumerik 840 C total power requirement 30 kW weight of the machine ca. 14,5 t Kledsy Nfdaopfx Afusu

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, CNC turning machine GILDEMEISTER CTX 510 ECOLINE With Siemens control Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm With the following accessories: Sliding guard 12-station turret with 6 driven tool stations Tool measurement in the working area 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Kljdpfx Afszd Dczjueu Various tool holders VDI 40 Signal light, 4-color Tailstock with quill Chip conveyor with coolant tank 4 machine feet Operating manuals

Condition: used, Year of construction: 2002, power capacity 4 kW feed pressure 10 bar liter capacity 500 l total power requirement 4 kW weight of the machine ca. 110 Kg dimensions of the machine ca. 2,5 x 1 x 2 m, gesamt Kaeser compressed air compressor, a reliable unit with a 500-litre tank, compressor and refrigeration dryer. Technical specifications: Manufacturer: Kaeser Year of manufacture: 2002 Power: 4 kW Connection: 16 A Tank capacity: 500 litres The compressor is solidly built, designed for continuous operation and reliably supplies compressed air for various applications. Viewing available at any time Accessories available Shipping via a haulage contractor possible Kljdpfxezd Hacj Afusu Translated with (free version)

Condition: not inspected (used), Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm Klsdpfx Ajzdk Hysfuju > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set ...

Condition: good (used), Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm -Shaft: Ø 55 mm -Construction: B3 Kljdsd E Tfnspfx Afusu -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 6 spirals -Dimensions: see photos -Overall dimensions: 1235/210/22 mm Kljdpfozd N Ehjx Afusu -Weight: 3.3 kg

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ksdpfszddkgox Afuslu