Used Elaflex Axial Compensator for sale (1,505)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 1,47,007 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, bar diameter (max.): 36 mm, controller manufacturer: TRAUB, controller model: TX8i (64-bit), workpiece diameter (max.): 32 mm, number of slots in tool magazine: 22, number of axes: 10, This 10-axis TRAUB TNK 36 horizontal turning machine was manufactured in 2002. It features a main spindle speed of 6,300 rpm and a counter spindle speed of 6,300 rpm. The machine includes a maximum workpiece diameter of 32 mm and a coolant tank capacity of approximately 360 liters. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 machine we have for sale. Contact us for further details. • 14" flat screen • Additional V24 RS232 interface in the electrical cabinet • MDE interface in the electrical cabinet (machine status and parts counter) • Rigid tapping without compensation chuck • Polyform function for C-axis • Tool monitoring • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Main spindle C-axis • Motorized counter spindle • Counter spindle bore: 32 mm • Counter spindle speed: 6,300 rpm • Counter spindle Z-axis travel: 250 mm • Counter spindle Z-axis rapid traverse: 30 m/min • Counter spindle C-axis • Counter clamping pressure device • Workpiece ejector • Increased feed force • Hainbuch Axfix chuck • X2 travel: 50 mm • Y2 travel: ±20 mm • Z2 travel: 100 mm • X2 rapid traverse: 15 m/min • Y2 rapid traverse: 15 m/min • Z2 rapid traverse: 15 m/min • 12 driven tools (via central drive) • Driven tool speed: 6,000 rpm • Electronic gearbox • X3 travel: 370 mm • Z3 travel: 250 mm • X3 rapid traverse: 30–60 m/min • Z3 rapid traverse: 30 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Increased feed force • X4 travel: 73 mm • Y4 travel: ±50 mm • X4 rapid traverse: 15 m/min • Y4 rapid traverse: 15 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Left-hand workpiece conveyor • Pneumatic workpiece gripper • Gripper jaws: Ø5–8 mm / Ø8–20 mm / Ø20–36 mm • Maximum workpiece length: 200 mm • Maximum workpiece diameter: 32 mm • RESY compact belt filter • Cooling unit • Coolant tank capacity: approx. 360 l • Coolant pressure: 7 bar Ndsdpfx Aiezl S Emsyoa • Coolant flow rate: 50 l/min • Through-tool coolant: 30 bar • Coolant gun • Connected load: 22 kW Optional equipment, not included: • KNOLL 240S-1/100 hinged belt chip conveyor (discharge height: 950 mm) • Bar feeder preparation (guide tubes Ø25 / Ø36) • Rotating workpiece stop (16 × 16 mm shank) • Brankamp CMS 100 collision monitoring (main and counter spindle) • FMB Turbo 5-42 XT / 3200 "C" bar feeder • Basic set of static and driven tool holders included Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven Nsdpfx Aiet U Uiaeyjda ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: excellent (used), Year of construction: 2006, Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical data: Maximum pressing force: 2,200 kN (220 tons) Working length: 3,050 mm Width between uprights: 2,600 mm Maximum ram stroke: 450 mm Max. table overhang distance: 685 mm Feed (overhang): 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: adjustable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other specifications: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Axes: Y-axis – Upward and downward movement of the beam X-axis – Approach and bending distance adjustment R-axis – Approach and downward movement 2 x Z-axis – Lateral and counter movement stop 2 x Z-axis – Forward and backward movement with slight inclination of the X-axis Nsdoyhdyispfx Aiyeda V-axis – Easy-Form laser crowning – bending distance compensation

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Ndedpsxpi Dusfx Aiyoa Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 250 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DVK System Master 1 RE was manufactured in 2020. It features a robust working area with X-axis travel of 250 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 25 kW spindle and an automatic tool changer with a capacity of 32 tools. If you are looking to get high-quality machining capabilities, consider the DVK System Master 1 RE horizontal machining centre we have for sale. Contact us for further details. • CNC control: FANUC CNC with 10.4" colour operator panel, PLC, Ethernet connectivity, dedicated machine software • CE certified • Working area: • Birotational clamping vise axes: A-axis 360° continuous, B-axis 360° continuous • Spindle: • Type: OMLAT electrospindle • Torque: 80 Nm • Tool interface: HSK-A63 Nedpfx Aszp Hndoiyeda • Tool magazine/ATC: • Automatic tool changer • Max tool diameter: 70 mm (150 mm with adjacent pockets free) • Random tool selection • Clamping system: • Self-centering birotational hydraulic vise • Jaw stroke: 50 mm • Clamping force: 5,000–30,000 N • Cooling & lubrication and services: • Liquid-cooled spindle • Centralized automatic grease lubrication • Pneumatic system • Hydraulic system • Air-water heat exchanger • Machine pressurization system • Machine data: • Installed power: 55 kW • Supply voltage: 400 V / 50 Hz Additional equipment • Robot automation: • FANUC M20iA/20M anthropomorphic robot, 6 axes, 20 kg payload • Schunk PGN125 two-jaw gripper • Pallet system: • Two vertical pallet magazines • Pallet size: 480 × 300 mm • 54 pallet positions per magazine (standard) • Chip/coolant and extraction: • Internal coolant through spindle • 60 µm cartridge filter • MAHLE self-cleaning 60 µm filter • Rain-type work area washing system • Chip conveyor with drag chain and rotofilter • Coolant chiller • Oil mist extraction system • Measurement, monitoring and accuracy: • Marposs 3D radio probe • Laser tool presetter • Thermal compensation on X, Y and Z axes • Optical scales on X, Y and Z axes • Tool life monitoring • Extended work coordinate system (48 additional offsets) • Artificial vision system with 2 cameras • Clamping enhancement: • Pressure-controlled hydraulic clamping • Included auxiliary equipment: • Bonfiglio MROTOS 8555 4 E LRSA industrial parts washer, robot integrated • Automator ADP5090 dot peen marking system with AC500 controller, robot integrated: • Marking area: 50 × 90 mm • Pneumatic marking head • Connectivity: Ethernet / USB / RS232 / RS485 • Touch-screen AC500 controller • Marking speed up to 10 characters/second

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. Nodpfxetzkg Us Aiyeda DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Ndedpfxozrwyis Aiyja Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate • Documented test run after successful inspection. Availability: upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.

Condition: good (used), functionality: fully functional, machine/vehicle number: RYA289, mileage: 92,126 km, power: 100 kW (135.96 HP), first registration: 05/2023, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 9, number of previous owners: 1, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, air conditioning, airbag, all wheel drive, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, A1O Rear axle shaft make IFA BB6 Brake booster failure compensation BB7 CO2-optimized brake system BH1 Hold function 70 Pedestrian protection CL1 Steering wheel adjustable for tilt and height CL4 Multifunction steering wheel with trip computer CM2 Bumpers and attachments painted in body color CU4 Aerodynamics package E07 Hill start assist E1D Digital radio (DAB) E2R Radio generation 2 E34 Buffer battery for starting process EA4 Audio 40 ED4 AGM battery 12 V 92 Ah EL9 2-way speakers front and rear EW6 Pre-installation for Remote Services Plus EY2 Pre-installation for Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management EZ8 PARKTRONIC F61 Interior rear-view mirror F66 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors FKB Combi vehicle FP4 Chrome package interior G43 9G-Tronic H00 Warm/cold air duct to passenger compartment H20 Heat-insulating glazing all around HH9 Semi-automatic climate control TEMPMATIC HI1 Climate zone 1 (cold/comfort) HX1 Refrigerant R-1234Yf HZ0 Electric auxiliary heater HZ7 Semi-automatic climate control, TEMPMATIC in rear IL6 Metallic paint IN2 Wheelbase 3200 mm, long overhang J55 Seatbelt warning for passenger seat JA1 Warning lamp for windshield washer fluid level JH3 Communication module (LTE) for digital services JK3 Instrument cluster with pixel matrix display JW8 Attention Assist JX2 Maintenance interval 40,000 km K51 Misfuel protection KB5 Main tank 70 liters KP7 SCR emission control Generation 4 LA2 Light assistant LD9 Interior light(s) in rear LE1 Adaptive brake light MJ8 ECO start-stop function MK8 Speed limiter 210 km/h MO6 Emission class Euro 6D M/N1 Gr. II MS1 Cruise control MU2 Engine OM654 DE 20 LA 100 kW (136 hp) MX0 BlueEFFICIENCY package RY2 Tire pressure monitoring on front and rear axles, wireless S00 Airbag control unit Generation AB12 S02 Driver seat S23 Front passenger seat, double seat SA-Codes SA6 Airbag front passenger SH1 Thorax-pelvis sidebag driver SH9 Windowbags for driver and passenger T14 Active lock for sliding door T70 Child safety lock on passenger compartment doors T74 Grab handle for entry T75 Grab handles for entry driver and passenger U63 Passenger compartment seating: 3-seat bench, 2nd row U71 3-seat bench 1st row with foldable outer seat UR3 Quick-release seat attachment in rear V23 Deluxe interior trim V36 Roof liner V41 TPO plastic flooring in passenger compartment Ndodpjzrlz Uefx Aiyea VF4 Caluma black upholstery VH1 Grab handles in rear VV9 Mounting points in roof frame W16 Fixed window front left in sidewall/sliding door W17 Fixed window front right in sidewall/sliding door W29 Fixed rear window W50 Double rear door, 180°, without window W70 Privacy glazing in rear, dark glass W78 Window in tailgate/rear door with wiper and washer WM0 Model update control code WN0 Factory control code X30 Registration certificate Part 2 X99 Manufacturer Mercedes-Benz AG XA5 Weight variant 3,200 kg XC9 COC papers XI3 Model year change G3-I XM0 Model update XO9 Mercedes-Benz Mobilovan with DSB and GGD Y10 First aid kit Y44 Warning triangle Z0A Key account group 1 Z3R Premium tire protection (3 years) Z42 Passenger car registration ZC5 Sales indicator 0 ZG2 Permanent all-wheel drive ZM4 Combi vehicle ZQ8 Tourer PRO

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Ndedpfx Aiozrzymjysa Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel engine) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard bucket volume: approx. 0.60 – 1.00 m³ 5826

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces Nsdpfxjk Dpp Se Aiyeda - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Nedpjxuad Aefx Aiyeda Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T Nedsxf Na Uspfx Aiyoda GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection Njdpfxsy Samue Aiyeda SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation Nedpfx Aisy Saqgoyeda - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: new, connected load frequency / V weight / kg range L-W-H / mm GERD WOLFF Crane Fork Pallet Fork CY 20 - 2000kg with automatic weight compensation Condition: New Load capacity: 2000 kg Nodpfxjypwfzo Aiyjda Adjustable fork width: 380–900 mm Fork length: 1000 mm Fork width: 120 mm Fork thickness: 40 mm Lifting height: 1300–2000 mm Hook height: 1655–2355 mm Net weight: 160 kg

Condition: used, mileage: 9,231 km, power: 120 kW (163.15 HP), first registration: 09/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, loading space length: 2,566 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0935.4438382 ----EQUIPMENT Nodpfjwmz Dwjx Aiyjda * Airbag: Thorax bag - Pelvis - Side bag for passenger * Airbag: Thorax bag - Pelvis - Side bag for driver * Towing capacity 2500 kg * Seats: Passenger seat, single seat * Brake assistant, active * Parking brake, electric * HOLD function * Wooden floor (cargo area) * Interior lining of cargo area up to roof height - wood * LED light strip in cargo area * Load securing rail system * Navigation accessories: Live Traffic Information * Navigation * Package: Winter package - Seat heating for driver and passenger seat - Heated windshield washer nozzles - Heated steering wheel * Tire pressure monitoring system - on front and rear axle (wireless) * Rear view camera, high resolution, with guide lines * Rear door: Rear swing doors, opening to the side * Seats: Seat cushion depth adjustment driver * Blind spot assistant * Partition, continuous with 1 window * Traffic sign assistant * Electronic Stability Program (ADAPTIVE ESP) with integrated Anti-lock Braking System (ABS) - Anti-slip regulation (ASR) - Electronic brake force distribution (EBV) - Brake assistant (BAS) * Electrical system for trailer socket - electrical cables for power supply to the trailer - without trailer control unit * ATTENTION ASSIST * Storage compartments: Cup holder front * Towing eye front/rear, can be screwed in * Airbag passenger side * Airbag driver side * Exterior mirrors el. adjustable and heated * Outside temperature display * Battery: Buffer battery for starting * Battery: Fleece battery 12 V / 92 Ah * Attachment points in the roof frame * Hill-start assist * Brake light, third * Brake lights, adaptive * Roof control unit comfort * Diesel particulate filter * Tachometer electronic * Automatic headlight activation * Window lifts electric driver/passenger * Generator 14 V/250 A * Generator management * Speed limitation 210 km/h * Transmission: 9G-TRONIC * Weight variant 2,800 kg * Seatbelt warning for passenger/driver seat * Glove compartment lid lockable * Interior lining of cargo area, lateral * Air conditioning, regulated Tempmatic * Instrument cluster with pixel matrix display - Operation is carried out via the buttons of the multifunction steering wheel - Round instruments for speedometer and tachometer or fuel level and coolant temperature - Pixel matrix display in white and red with high display quality between the large round instruments * Comfort driver seat * Comfort closing * Communication module (LTE) for digital services * Headrests * Fuel tank large, approx. 70 liters * Paint: Solid color * Steering wheel adjustable in height, vertically and axially * Headlight range adjustment * Mercedes-Benz emergency call system Communication module (LTE) for digital services including breakdown assistance * Multifunction steering wheel * Interior lighting rear * Navigation: Navigation pre-installation * Fog lights * Upholstery: Fabric Caluma black * Radio/Telematics, Audio 10 * Radio: Digital radio DAB * Radio: Radio generation 2 * Power steering, electromechanical * Seat: Lumbar support driver seat * Seats: Driver seat Plus * Lane keeping assist active * Start-stop function * Socket 12V * Cruise control * Partition, continuous * Pre-installation Remote Services Plus * Immobilizer * Heat-insulating glass all around * Central locking with remote control * Approved as a truck ... and more ----The vehicle has not been prepared! Delivery throughout Germany possible for an extra charge. Errors

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013965, empty load weight: 7,180 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Please note: the images shown are archive photos for illustration only! 2 units available #Chassis / Tractor Semi-Trailer Additional splash guard panel riveted to the underside of the floor, in the neck area above the tractor unit's rear axle and above the wheels; reinforced frame for loads extending to the outer frame, outer frame fitted with "Load-Lock" profile at approx. 400 mm intervals 10 pairs of mushroom-head lashing points recessed into the top/outer edge of the outer frame, 10 t each 24 t twin-speed landing legs, single-side operation, with semi-round foot and straight base plate, with thrust compensation Telescopic rear support legs Hook rail for leaning-type loading ramps across the full width of the rear pull-out Mechanical rear pull-out with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm, incl. extendable rear underrun protection with lighting Storage compartment for loading ramps integrated in the rear pull-out, usable only when the rear pull-out is extended by approx. 1,000 mm 1 pair of ramps, 3,000 mm long, 300 mm wide, load capacity 6,000 kg per pair Electric winch, 24 Volt, pulling force approx. 8,165 kg, mounted centrally at the front, operated by wireless remote control #Axles & Suspension Axles/chassis laser-aligned – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operable from the towing vehicle, incl. forced lowering and traction assist SAF or BPW drum brake axles, manufacturer's choice #Wheels & Tyres 235/75 R 17.5" make at manufacturer's discretion Steel wheels in twin arrangement, factory silver #Electrics 24 Volt, LED multi-chamber lamps, yellow LED side marker lights, LED number plate light 2 white LED front position lamps 2 white/red LED rear outline marker lamps on flexible mounting arms 2x 7-pin and 1x 15-pin fool-proof connector sockets at the front, without connecting cable 2 additional LED work lamps at the rear Ndodpfozu Aqxox Aiyoa 1 beacon light with bracket 2 pairs of warning panels, dual LED-illuminated and extendable to 3,000 mm, removable via plug connector Additional 7-pin socket (to ISO 1724) in the rear underrun protection LED work lamps on the sides, 1x each on the left and right #Floor Chequered aluminium floor (Lohrblech type) of welded construction; rear pull-out walkway area fitted with chequer plate, centre section in steel chequer plate #Country of Registration / Plates Germany With DEKRA inspection and certification (pursuant to §13 EC-FGV) 24/7 service hotline Prepared for single-row number plate holder Contour marking with reflective tape to ECE R048, yellow on the sides and yellow at the rear Warning panel to ECE-70 Combination type approval report for applying for a §70 permit for a towing vehicle, on collection from the Triptis plant (please note the maximum permissible gross train weight in the tractor's registration documents; apply for an uprating beforehand if required – this is at the manufacturer's discretion and is not guaranteed; any resulting costs will be invoiced separately) 1 to 3 "Angles Morts" blind-spot stickers (as required by regulation and technical feasibility) #Paintwork Frame hot-dip galvanised incl. passivation 15-year warranty against corrosion perforation Support/landing legs feet black coated 2 units available

Condition: used, mileage: 7,928 km, power: 150 kW (203.94 HP), first registration: 10/2024, fuel type: electric, overall weight: 3,500 kg, axle configuration: 2 axles, fuel: electricity, gearing type: automatic, suspension: steel, number of seats: 7, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, JH0 Instrument cluster with variable display (widescreen cockpit), E1E navigation system for MBUX multimedia system, AIR airbag, driver's side, JB7 parking package with reversing camera, JP1 PRE-SAFE system, EW8 pre-installation for remote and navigation services, 502 updates for intelligent speed assistant, 9147 PAINT COLOR ARCTIC WHITE MB 9147, HI1 climate zone 1 (cold/comfort), IB6 model series C447 Vito/V-Class, IG4 standard, IG5 basic, IH1 head unit Europe/CIS/Mongolia, L__ LEFT-HAND DRIVE, LE6 interior lighting, rear, LX5 Europe, Q00 trailer load 0 kg/lbs, R22 wheel size group 2, RF9 tire manufacturer Goodyear (90), RM1 M+S tires, RM4 comfort tires, RX7 wheel manufacturer Borbet, SK2 seat occupancy recognition, driver's seat, SK6 child recognition in the vehicle, passive, X30 vehicle registration document, part II, X99 manufacturer Mercedes-Benz AG, XM8 control code development, XO7 Mercedes-Benz Mobilo with breakdown assistance and extended guarantee, XU1 signs/printed materials, German, XW9 control code WLTP conversion, XY5 model year 5, XZ2 model generation 2, Y10 first aid kit, Y44 warning triangle, Y5D CONTROL CODE - B2C Identifier, Z0H control code certification, Z0Q customer order VdZ, Z3T premium complete wheel protection (3 years), ZC6 sales code 1, XJ4 model year G4-I, 805 AEJ X4/1, FLK LUXURY STATION WAGON, IK3 luxury station wagon, XM0 model update, JA7 blind spot assist, E1T touchpad, V36 headliner, HX1 refrigerant R-1234yf, W65 tailgate, BB6 brake booster failure compensation, BA3 active brake assist, CF9 basic chassis Plus, JB4 active lane keeping assist, 18900 ., We will gladly calculate a customized financing or leasing offer for you and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage, touch-up paint was applied to the vehicle during preparation. No liability for printing and typing errors. Subject to errors and prior sale... more on our website. Nedeztca Djpfx Aiyjda

Condition: ready for operation (used), Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment • main product feeder • opening station with sucker and sword Njdpfx Aod Hxrgjiyeda • 7 insert feeders • belt delivery • compensating stacker

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Ndodpfsmn Sk Nsx Aiyoa Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: good (used), Size: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Cover size: max 642 mm; min 203 mm Speed: max 12.000 c/h Equipment gathering machine • 18 stations • feeders 3691 • reject gate 3614 controls • miss and double sheet control • ASAC automatic self-adjusting calipers intermediate elements • spiral race away • 3 jogging elements • connected with perfect binder • 21 clamps • milling and roughening station • 2 hot melt spine gluing units • hot melt side gluing unit • 2 premelters • SF stream cover feeder • SF cover nipping and pressing station • smooth lay down device conveyor system Nodsrgpqcepfx Aiyjda • ca. 30 m • connected with three knife trimmer • three knife trimmer MM Zenith 3672 compensating stacker • compensating stacker Müller Martini standards • standard accessories • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Ndodpfxjxx Ti Ts Aiyea Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] Ndodpfx Aox Ed A Rsiyoa - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Condition: used, mileage: 6,18,145 km, power: 338 kW (459.55 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab: Type L (long) 1 * Air-suspended cab mount * Mechanically operated tilting roof * Air-suspended driver's comfort seat, heated, with lumbar support * Static co-driver's seat with storage compartment * Sleeper bunk with mattress and storage space * Eberspächer auxiliary air heater * Air conditioning with automatic control * Multifunctional steering wheel * Leather steering wheel * Central locking with remote control * Electric windows for driver and co-driver * Sun visors and curtains * Interior design "Urban Concrete" ----Infotainment & Connectivity MAN Media Truck Advanced * Navigation Europe (SD) * DAB+ digital radio * Bluetooth / hands-free system * Voice control * USB / AUX * RIO Box (Connectivity Board) * Remote download of digital tachograph data ----Lighting & Electrical System LED daytime running lights * Halogen twin headlights H7 * Cornering lights * Automatic low beam with light sensor * 2 work headlights on the cab roof Njdpfx Ajzv Dhueiyoda * Rotating beacon lights, yellow * Step light at the entrance * Additional interior lighting, red/white ----Engine & Exhaust Engine: MAN D2676LF52 1 * Power: 460 hp (338 kW) 1 * Torque: 2,300 Nm 1 * Emission standard: Euro 6 SCR 1 * Common-rail injection * Exhaust aftertreatment with AdBlue * Flame-starting system * Fine dust and pollen filter ----Transmission & Drivetrain Transmission: MAN TipMatic 14-speed DD with retarder 1 * Transmission software: Profi (on-road use) * Differential lock, rear axle * EfficientRoll * Rocking function * Auxiliary drive MAN 650P * Axial pump MEILLER * Hydraulic system MEILLER for tipper semi-trailer (275 bar high pressure) ----Chassis & Brakes Front axle suspension: Air suspension, 8.5 t * Rear axle suspension: Air, 13 t * ECAS air suspension system * MAN BrakeMatic * Disc brakes, front and rear axles ----Driver Assistance Systems Emergency Brake Assist 2 (EBA2) * Lane Guard System IV * Tire inflation connection * Emergency brake signal (ESS) * ABS * ASR * ESP * Electronic speed limiter 90 km/h * Cruise control * Adaptive Cruise Control (ACC) with Stop & Go * MAN EfficientCruise 2 * EBA2 Emergency Brake Assist ----Semi-trailer operation & structure Semi-trailer coupling: JOST JSK 42 1 * Coupling height: 185 mm * Saddle plate dimension: 585 mm * Work platform with steps and handrail * Hydraulic couplings ARGUS HDK * Oil tank, aluminum, 200 l, left * MEILLER hydraulic system for tipper semi-trailer, high-pressure system 275 bar/low-pressure system 150 bar * Coupling system ARGUS HDK DN 20, screwable for hydraulic connection, high-pressure system ----* Tire dimension, front axle: 315/80R22.5 * Tire dimension, rear axle: 315/80R22.5 * Fuel tank: 390 liters * AdBlue tank: 80 liters * Technically permissible total weight: 20,500 kg * Tare weight: 7,686 kg * Overall length: 5,983 mm * Wheelbase: 3,600 mm * Next inspection due: 10.2026 ----Vehicle number: 11902----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. We can offer the following services for an additional fee: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: like new (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,185 mm, total width: 1,082 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 550 kg, input voltage: 230 V, table length: 1,122 mm, travel speed (max.): 520 mm/min, table load: 180 kg, compressed air connection: 5 bar, Mitutoyo Crysta Apex-C544 CNC 3D coordinate measuring machine. Within the Netherlands, transport and installation will be provided free of charge (calibration and certificate are not included, but can be offered). Well-maintained Mitutoyo 3D coordinate measuring machine Crysta Apex-C544 In very good condition. Fully meets its specifications. Year of manufacture 2004. Three-dimensional measurement within two micrometers! Measuring range: X-axis 505 mm. Y-axis 405 mm. Z-axis 405 mm. Specification ISO 10360-2 MPEE = [1.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Temperature compensated. Resolution 0.0001 mm. CNC speed 520mm/sec. Maximum acceleration 0.23 g. Load capacity with work piece up to 180 kg. Height 220 cm. Width 110 cm. Length 115 cm. Ndsdpfx Aiszvfddoyea Air-bearing shafts (feed 5 Bar). Operates on 230 Volts to controller (the CMM itself is low voltage). Crysta Apex-C544 (PH1 + TP200). Standard joystick. Desktop PC with Windows 11 Pro NL. 22-inch monitor. Mouse & keyboard. MCOSMOS v3.3 + Scanpak. Upgrades are possible to: PH10T/M + PHC10-2. SCR200 + 6 STD module. MCOSMOS as desired, subject to availability. Dual joystick. On-site training. Sales prices exclude service (takeaway price): Transport, Installation, Calibration, and Measurement Certificate. Demo/working viewing is available in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration and certificate are not included, but are possible).